Veise RZ07 Smart Lock APP User Guide

Veise RZ07 Smart Lock APP User Guide

The DDLock App is free to download. There’s no subscription fee to register our Web management system.

HOW TO REGISTER

Step 1
Download“DDLock” App in Google Play or App Store.

Scan QR code to download DDLock App

Step 2
Tap on register to get started

Step 3
Fill out the information and tap “Get Code”.
The email inbox you registered will be sent a verification code to verify your account.
Put the code you received, tap on“Register” to complete.

Notes: The DDLock App is required to operate the lock. After the lock is properly installed, make sure this step is performed by the lock owner.

PAIRING YOUR LOCK

Step 1
Tap on

Step 2
Tap on “+Add Lock”

Step 3
Tap on“Next”

Note: If the lock is not found in the list, please review the following tips.

1. Reset your lock and make sure the original master code is 123456.
2. Check if the Bluetooth is turned on in your phone’s settings.
3. During the pairing, wake up the keypad screen by touching it with your palm and keep the screen always on.

Scan QR code to watch the pairing video

ADMIN PASS CODE MANAGEMENT

Notes: After pairing the lock with DDLock, the admin passcode will be changed to a random 7 digit number, you can check the new admin passcode by following the picture guide above. And you can change it to your own administrator password.

LOCK PAGE OVERVIEW

Unlock/Lock
Unlock/Lock using phone’s Bluetooth

eKeys
View and modify current eKeys, set up and send eKeys

Passcodes
Generate 6 different types of passcodes

Records
Check unlock/lock records

Authorized Admin
Create and edit admins

Settings
View and modify settings

Cards
Set up your cards here

Fingerprints Page
Set up fingerprints
(RZ06 doesn’t have Fingerprints page.)

Notes: Some of these icons may not appear if the Gateway is not connected to the lock. The lock only works with Veise gateway G2.

APP UNLOCK / LOCK

To unlock the lock, tap this icon once.
To lock the lock, press and hold on this icon.

Note: It only works when your phone is close to the smart lock in Bluetooth range.

PASSCODES

Step1 1
To access the passcode menu, tap on “Passcode” icon. This will take you to the passcode page.

Step 2
Tap on “Generate Passcode”

Step 3
Enter a name for this Passcode

The definition of 6 types of passcodes

as 2638 (set it as permanent or timed)
One-time| One time use| Recurring| Lasts for scheduled hours weekly

In Passcodes, choose one passcode and you can edit the passcode’s number, validity and name.
The code can also be deleted and view the records.

Note: To customize one passcode, it requires your phone is close to the smart lock in 32 feet (within Bluetooth range), You could also choose to connect the lock to the Veise gateway G2.

CARDS

Step 1
Tap on”Cards”

Step 2
Tap on “Add card”

Step 3
Choose the validity period of the lock. Once the lock says “Please swipe your card”, place the card against 5 on the keypad.

lf you hear a long beep, the card can be used to unlock your lock

Note: It only supports to add 13.56MHz cards, such as mifare card, NFC card, Desfire card and EV1 card.

EKEYS

Step 1
eKeys work by sharing appaccess of your lock with another DDLock account. eKey recipients will be able to use their phone to unlock/lock the lock.

Step 2
Tap on “Send eKey”

Step 3
Enter recipient’s user name.It will be the phone number or email address during registration. eKeys do not require wifi or bluetooth to be sent or revoked.

Note : lt is strongly recommended that the recipient first register an account using the DDLock App.

FINGERPRINTS

Step 1
Tap on Fingerprints

Step 2
Tap on “Add Fingerprints”

Step 3
Select Fingerprint type per your needs

Step 4
Follow the instruction in the App, place your finger on the fingerprint scanner for 4 times. Please place different angle of your prints and press a little bit harder on the scanner each time

Note:Have an issue on the fingerprint?

1. Make sure the scanner surface is clean and dry.
2. Try different fingers.
3. Make sure your finger is clean and dry.
4. Take out batteries, wait a minute and place them back.

AUTHORIZED ADMIN

Authorized Admin is similar to eKeys. An authorized admin can create and edit all access methods (passcodes, fingerprints, eKeys, etc.). eKeys only lock or unlock the lock.

Step 1

1. Unlock/lock via the App.
2. Generate, Edit, Delete passcodes, IC cards.
3. Adjust settings l ike passage mode, auto-lock timer, & turn on/off the lock sound.

Step 2
Tap on“Authorized Admin” Set Timed Admin or Permanent Admin.

Note: If the authorized admin has been created or deleted, it doesn’t work, please slide down the page to refresh.

PASSAGE MODE & AUTO-LOCK

Step 1
Enable Auto Lock, the lock will be locked automatically in 5 seconds by default.The Auto Lock time can be changed in Auto Lock timer. Go to Settings as shown in the image to get more information regarding Auto Lock.

Step 2
Settings >Passage Mode

Step 3
Enable Passage Mode, the lock will stay Unlocked until it’s locked manually. In Passage Mode, Auto-lock will be disabled.

Note: When setting passage mode or auto lock, it requires your phone is close to the smart lock in 32 feet (within Bluetooth range), You could also choose to connect the lock to the Veise gateway G2.

LOCK SETTINGS

In Basics, you can view and change lock information such as Lock Name.

Gateway shows signal strength if Gateway is connected.

With Remote Unlock on and a Gateway connected, you can remotely unlock/lock your lock.

Lock Sound turns on or off the sound of the touch keypad.

lmport from another lock allows for the transfer of passcodes and cards from one lock to another.

Delete will remove the lock from your account and clear any settings on the lock. lt requires your phone close to the lock

RECORDS

Important

1. Out of Bluetooth range or no gateway connected, the records of passcode, fingerprint, card unlocking are not in the list timely. Only eKey unlocking is in real-time records.
2. After pairing succesfully, click on the refresh button and wait few minutes to check the real-time records. You could also connect the lock to the Veise gateway G2, then the records will push in real-time.

DOOR LOCK WEB MANAGEMENT SYSTEM

Step

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>