WYBOTICS WY200 Robotic Pool Cleaner User Manual

WYBOTICS WY200 Robotic Pool Cleaner

Thank you for purchasing WYBOT Robotic Pool Cleaner. If you have any question or issue, please contact us for customer service.

Product Information

• Product Name: WYBOT Robotic Pool Cleaner (Model: WY200)
• Product Type: Robotic Pool Floor Cleaner
• Manufacturer: WYBOT
• Age Recommendation: Not suitable for children under 8 years old or individuals with mental disabilities

Product Usage Instructions

1. Before using the WYBOT Robotic Pool Cleaner, carefully read and understand the user manual provided.
2. Only use the recommended or manufacturer-approved accessories with the machine to ensure proper functionality.
3. The product should not be used by children under 8 years old or people with mental disabilities. If necessary, adult supervision and guidance are required.
4. Prior to charging, remove the machine from the swimming pool and place both the charger and the machine indoors or in a splash-resistant facility. Ensure that the charging port is dry before charging.
5. Use the original charger provided to charge the machine.
6. After removing the machine from the pool, confirm that the charging port is dry.
7. Do not turn on the cleaner when placed on the shore, as it may affect its normal use.
8. Clean the filter box after each use to prevent excessive dirt from affecting the cleaner’s performance.
9. Store the cleaner in a cool and ventilated place indoors to avoid direct sunlight when not in use.
10. Only professional personnel should handle the sealing box of the main machine body and sensor assembly to avoid danger or damage to the cleaner.
11. Charge the machine before the battery is completely exhausted. When the yellow light of the machine is on, promptly charge it.
12. Avoid overcharging the machine, as it may reduce the battery’s lifespan.
13. The engine oil seal contains grease, which may cause slight pollution to the water body if it leaks.
14. If the machine is stored for a long time, it should be charged every three months using the original charger to maintain the power level between 40% and 60%. Neglecting to charge the machine for an extended period may cause fatal damage to the battery.
15. Do not pierce the shell of the machine with nails or sharp objects, and avoid hammering, hitting, or throwing the machine.
16. Do not charge the machine near fire or extremely hot conditions. Also, avoid using or storing the machine near heat sources.
17. To use the cleaner in the swimming pool, ensure that the bottom of the cleaner faces the pool wall. Hold the handle and gently place the cleaner into the water. Turn on the switch, and after 20 seconds, it will start working. It is important to fully discharge any gas inside the cleaner to ensure its normal operation and allow the machine to sink naturally to the bottom of the pool.

Important tips

1. It is strictly forbidden to use this machine outsides the use conditions of this machine. Please read this user manual carefully before use. Please use the product according to the instructions in the user manual. Our company is not responsible for any loss and injury caused by improper use.
2. Only accessories recommended or sold by the manufacturer can be used for the machine.
3. The product shall not be used by children under 8 years old or people with mental disabilities. If necessary, the product shall be used under the supervision and guidance of guardian. Please don’t let children ride on the product or play with the product as a toy.
4. To prevent accidents, before charging, the machine must be taken out from the swimming pool, and the charger and the machine must be placed indoors or in a splash-resistant facility for charging. Before charging, ensure that the charging port is dry.
5. Please use the original charger to charge the machine.
6. Please confirm that the charging port is dry after the machine is taken out from swimming pool, then connect it with the charger, and confirm that the machine has been turned off (the indicator lights of the machine go off completely), otherwise it cannot be charged normally.
7. The charger must be plugged into a socket with leakage protection. And ensure that the ground wire on the socket is grounded in a standard and reliable way.
8. It is strictly forbidden to use other chargers to charge the machine. Please do not charge this charger to other equipment, avoid damage to the charger or the machine.
9. No one is allowed to enter the swimming pool when the cleaner is working, so as to avoid danger and injury.
10. When the cleaner is placed on the shore, please do not turn it on, otherwise it will affect the normal use of the cleaner.
11. Clean the filter box in time after each use, so as not to affect the work of the cleaner due to excessive dirt in the filter box.
12. When the cleaner is not in use, please store the cleaner in a cool and ventilated place indoors to avoid direct sunlight.
13. It is forbidden for non-professional personnel to disassemble the sealing box of the main machine body and the sealing box assembly of the sensor, so as to avoid danger or avoid damage to the cleaner.
14. Charge the machine before the battery is completely exhausted. When the yellow light of the machine is on, please charge the machine in time.
15. Do not charge the machine when the battery is full. Overcharging will reduce the life of the battery.
16. Engine oil seal contains grease. If grease leaks, it may cause slight pollution to water body.
17. Charge the machine under 5°C-35°C environment. When the battery is overheated, it shall be cooled before charging.
18. When the machine is stored for a long time, it shall be charged every three months. Please use the original charger to charge the machine, so as to ensure that the power of the machine is kept at 40%-60%. If the machine is not charged for a long time, the battery voltage will be lower than the overdischarge protection voltage due to the self-discharge of the battery, and when the time is too long, fatal damage will be caused to the battery, so please pay attention to this.
19. It is forbidden to pierce the shell of the machine with nails or other sharp objects, and it is forbidden to hammer, hit or throw the machine.
20. Do not charge the machine under fire or extremely hot conditions! Do not use or store the machine near heat sources.

Attention:

1. When putting the cleaner into the swimming pool, the bottom of the cleaner shall face the pool wall, hold the handle and put the cleaner into the water. At the same time, turn on the switch, and the cleaner will slowly discharge the gas, and after 20s, it starts to work (The gas in the cleaner must be completely discharged, otherwise gas will affect the normal work of the machine). Make the machine naturally sinks to the bottom of the pool.
2. When the cleaner completes the cleaning, it will automatically lean against the pool wall. And you can fish out the machine with hook.

Brief introduction to product

WY200 series robotic pool floor cleaner is a new and efficient robotic pool floor cleaning equipment. It can automatically clean the swimming pool without discharge of the pool water. At the same time, through the filtration system, it collects the suspended solids and sediments in the water. The main machine body is powered by 25.2V/6.4AH lithium ion battery pack, so it has high safety. Before using this product, please read the user manual carefully so that you can use this machine correctly.

Safety

1. Requirements for machine position during charging: See Article 4 of “Important Tips” on page 1.
2. Please do not use other chargers to charge this machine, please do not use this charger to charge other equipment!
3. Make sure that the switch is placed in the OFF position before charging the machine.
4. Do not start up the machine for cleaning when charging!
5. The cleaning machine shall carry out cleaning under 10 °C-35°C environment!
6. Charge the machine before the battery is completely exhausted. When the yellow light of the machine is on, please charge the machine in time.
7. Do not charge the machine when the battery is full. Overcharging will reduce the life of the battery.
8. Charge the machine under 5°C-35°C environment. When the battery is overheated, it shall be cooled before charging.
9. If the battery will not be used for a long time (more than 3 months), it shall be charged.
10. Make sure the charging port is dry before charging.

Specifications and parameters

• Input voltage of lithium battery charger: 100Vac-240Vac
• Rated frequency: 47-63Hz.
• Nominal voltage: 25.2 V, nominal capacity: 6.4AH
• Power of the whole machine: 65W
• Rated output current of charger: 3A
• Rated output voltage of charger: 29.4V
• Battery Runtime: Max 165min
• Flow rate: max 10.5m³/h
• Filtration capacity: 180μm
• Creeping speed: max 11m/min
• Waterproof rating: IPX8
• Use temperature (water temperature) range: 10 ℃-35 ℃
• Net weight: 8.3kg
• Product dimensions: 385 (length) 355 (width) 245 (height)
• Storage temperature: 5 ℃-35 ℃
• Charging time: 3-3.5H

Instructions for use

Description of buttons and indicator lights

state, the blue light goes on, it indicates startup, press the button again, the red light goes on, it indicates shutdown, and after shutdown, the red light goes off.
2|  | Status indicator light of the machine| 1.  Blue light is always on: startup

2.  Blue light flashes: normal operation

3.   Yellow light flashes: the machine has low power, it leans against the wall

4.    Yellow light is always on: the machine has low power, it leans against the wall and stops running

5.   Red light flashes and always lights up: the machine has failure

Troubleshooting:

1. When the red light of the machine flashes and is always on, shut down and restart the machine. If it cannot return to normal running, please contact the after-sales service personnel.

Battery charging method

1. The operation steps of charging
   Make sure that the machine is turned off (the indicator lights are completely off). When charging, please take the machine out from the swimming pool, and place the charger and the machine indoors or in a splash-resistant facility for charging. Unscrew the waterproof cap on the machine (ensure that the charging port is dry) and connect the charging port with the charging connector. When the battery charger lamp, it means that charging is in progress, when it turns green, it means that charging is completed.

2. Function description of charger indicator lights**
   Color and status of indicator lights| Charging state**
   ---|---
   Green light is always on| Waiting for charging, or the battery is not plugged or the charging is complete
   Red light is always on| Normal charging

Cleaning of filter box

1. Take out the filter box: Place the cleaner on the shore, open the cover plate by hand according to the position indicated in the figure (Figure 4-1), and the filter box is shown in the figure (Figure 4-2).
2. Take out the filter box from the machine (Figure 4-3).
3. Cleaning of the filter box Rinse the dirt of the filter screen with clear water (Figure 4-4),
4. Installation of the filter box
   Reinstall the filter box to the machine. The filter box is aligned with the water inlet and put into the cleaning machine. Put the cover plate on, make the filter box fit with the cover plate perfectly.

Acquisition of mobile App and connection:

1. Download the App:
2. In case of Android phones, search google play for winnygo, and download it
3. In case of iPhone, searches the app store for winnygo, download it
4. Turn on the machine, the machine light is blue and always on
5. Connect the APP with the machine within 20s the machine starting.
6. After the connection is successful, the APP will give a “Success” prompt
7. After entering the APP interface, the parameters of the current machine will be displayed, and users can modify the parameters according to their own demands in cleaning
8. After selecting the parameters, click Confirm
9. After restarting, the machine will execute the corresponding cleaning program according to the preset parameters

Note:

1. When using App, it needs to obtain Bluetooth use permission and location permission of the mobile phone
2. App is suitable for ios14 and above, and Android 8.0 and above.
3. To obtain weather information in APP, you need to turn on Location service.

Installation of top floating blocks (standby)
When it is difficult for the machine climb the wall, it cannot clean the waterline, and it tilts seriously when climbing the wall, solve the problems according to the figure. If the machine climbs the wall normally, the following operations are not required. After removing the adhesive, two top floating blocks are attached to the machine. Carry out installation according to (Figure 6-1).

Attention:

1. Before installation, ensure that there is no water in the bonding position.
2. There is adhesive on the back of the top floating block. When installing the top floating block to the big cover, the edges of top floating block must be glued properly. After 24 hours, the machine can be put into the pool for work.

Packing details

S/N| Name| Specificatio ns| Quantity (pieces)| Purpose| Remarks
---|---|---|---|---|---
1| Main machine body of the cleaner| WY200| 1|  | Put it directly in the **** packing box
2| Hook|  | 1|  |
3| User manual, certificates of conformity|  | 1|  |
4| Charger|  | 1|  |
5| Floating block|  | 2|  |

LIMITED WARRANTY

WYBOTICS ROBOT, owned by WYBOTICS CO., LTD, makes products at the best quality we can offer. All WYBOT products have been inspected against defects in materials and workmanship prior to leaving factory. WYBOT is happy to offer warranty for the repair or replacement of pool products for two (2) years on motor and PCB, and one (1) year on battery pack from the date of purchase. The provisions of this Limited Warranty only apply to the original purchaser. Please keep your original sales receipt, as this proof of purchase will be required and must accompany warranty claims to WYBOT or its designated agents. This Limited Warranty does not apply without proof of purchase; or should the purchaser modify or repair the product themselves or by unauthorized people; use non-WYBOT parts or accessories with the product; use the product in contravention of the manufacturer’s instructions; use improper voltage; abuse the product in any way; or through accident or negligence. This Limited Warranty will not cover consequential damages, including claims for normal wear-and-tea or any Act of God outside the control of WYBOT. Non-manufacturing defects, such as grasses that may grow through the ground cloth and/or pool liner are examples of which WYBOT cannot hold responsible for.

IN NO EVENT SHALL WYBOT, ITS AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or other jurisdictions, do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This Limited Warranty is not extended to close-outs, factory seconds, or resold products (i.e., garage sales, online auctions, or online retailers not purchased directly from WYBOT). Any issue with items purchased from these types of vendors/sellers will need to be addressed through these stores.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>