BN Products BNMS100B Mixing Stand Instruction Manual
- October 30, 2023
- BN Products
Table of Contents
Assembly Instructions
BNMS100B Mixing Stand
BNMS-100B Mixing Station
-
Check the package you received to ensure all parts are included. If any parts are missing do not return this product to the store but contact BN Customer Service at 1-800-992-3833.
-
To attach the Casters (#1) turn the Lower Fame Assembly (#5) upside down on a level surface. The two locking casters need to be installed in the back of the frame that is near the Foot Lock Lever (#4). Use a 3/4″ open end wrench and a 3/4″ socket to install the casters. Install a wheel bolt and washer up through the Lower Frame (#5) and through the Caster and attach with a Lock Nut (#3) on each wheel.
-
Place the Back Plate (#22) inside the Bucket Frame (#21) with the threaded stud sticking out of the bottom hole and loosely start the Wing Nut (#27). Thread the Lock Handle (#26) through the Bucket Frame and into the Back Plate but leave loose. See Diagram B.
-
With the Back Plate (#22) very loose slide the Extension Frame (#8) into the Bucket Frame and lock into place about 4 inches from the bottom.
-
Slide the Extension Tube (#10) with swivel into the Extension Frame and lock in place with the Pin (#9). See Diagra C.
-
Attach the two Knob Bolts (#13) to the Swivel Assembly.
-
Install the battery in the Timer and attach it to the back bracket.
-
The electric mixer can now be installed and the Swivel adjusted with the Bottom Knob (#18).
Note: When attaching an electric mixer, the paddle will need to be pushed up through the Swivel and threaded into the mixer.
No.| DESCRIPTION| PART No.| No.| DESCRIPTION| PART
No.
---|---|---|---|---|---
1| CASTER BNMS-100B NON LOCKING| 101113| 15| UPPER BALL BNMS-100B| 101127
2| WASHER BNMS-100B| 101114| 16| LOWER BALL BNMS-100B| 101128
3| LOCK NUT BNMS-100B| 101115| 17| MOUNTING PLATE BNMS-100B| 101129
4| PIN BNMS-100B| 101116| 18| BAKELITE BOLT M6 BNMS-100B| 101130
5| STAND BNMS-100B| 101117| 19| HEX BOLT M8 X 30 BNMS-100B| 101131
6| SLEEVE BNMS-100B| 101118| 20| HEX BOLT M8 X 15 BNMS-100B| 101132
7| ROTATING SHAFT BNMS-100B| 101119| 21| FRAME BNMS-100B| 101133
8| EXTENSION FRAME BNMS-100B| 101120| 22| BACK PLATE BNMS-100B| 101134
9| PIN BNMS-100B| 101121| 23| HOOK BNMS-100B| 101135
10| EXTENSION TUBE BNMS-100B| 101122| 24| RND HD BOLT M6 X 12 BNMS-100B|
101136
11| HOOP PIN BNMS-100B| 101123| 25| PROTECTION BOARD BNMS-100B| 101137
12| BUCKET BNMS-100B| 101124| 26| LOCK BOLT BNMS-100B| 101138
13| BAKELITE BOLT M8 BNMS-100B| 101125| 27| NUT M6 BNMS-100B| 101139
14| SWING AXLE ASM BNMS-100B| 101126| 28| CASTER BNMS-100B LOCKING| 101113L
BN Products-USA, LLC.
3450 Sabin Brown Road
Wickenburg, AZ 85390
(800) 992-3833
mail@bnproducts.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>