W-KING T9-2 Portable Wireless Stereo User Manual

W-KING T9-2 Portable Wireless Stereo

Thank you for purchasing the W-KING T9-2 Outdoor Wireless .Speaker. Please read this user manual carefully and keep it for foxed reference. If you need any assistance, please contact our support team with your product model number and order number.

• Amazon E-mail : support.amazon@w-king.com

Package Includes

• 1 x T9-2 Speaker
• 1 x Typ11-C charging Cable
• 1 x 3.5mm AUX Cable
• 1 x User Manual

Overview

Charging
Fully charge this speaker before first time using, plug the USB-C charging cable to the charging port Of the speaker and a 5V 2A power adapter. Power adapter is NOT INCLUDED

Note: When the battery charge <5%, the speaker will power off automatically.

• Power On
  • Press button until hear a rising tone and the Bluetooth LED Indicator light on.
• Power Off
  • Press button until hear a descending tone and the Bluetooth LED Indicator light off.

Bluetooth connection

1. Press   button for 2-3 seconds until hear a rising tone and the Bluetooth LED Indicator fast blinking blue.
2. Go to the Bluetooth settings on your mobile device, search and select “W-KING T9-2” from the list.
3. Once successfully paired, the LED indicator turns solid blue.

Note

When power on, the speaker will automatically reconnect to the last device it was connected to. (The speaker can memorize maximum of 8 paired devices ). The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired for power saving.

• Music Control Play/Pause ….. ……. Click
• Volume UP………. Rotate the knob Clockwise
• Volume Down… Rotate the knob Counterclockwise
• Next track ……. …. click
• Previous track …………….. click
• Switch Bluetooth mode/Aux-in mode. ….Click M
• Indoor/Outdoor Modes(EQ modes)…. …..Double Click

Bluetooth Disconnection
Press ” M ” button until the Bluetooth LED Indicator fast blinking blue to disconnect the current connected device, and go into new Bluetooth-paring mode.

USB Drive Playback

1. Plug your USB drive to the USB port of the speaker
2. Power on the speaker and press the Play/Pause button

Note

1. Supported music file format: MP3, WAV, APE, FLAC, WMA
2. Don’t set folders in your USB flash drive
3. This speaker only supports play in in sequence, it can not play randomly

True Wireless Stereo Function
The True Wireless Stereo technology enables you to use two speakers pairing via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect.

True Wireless Stereo connection operation

1. Place the two speakers near each other (the distance should not be over 10 meters).
2. Power on the two speakers, double click the button on one speaker as MASTER speaker (playback left channel), the LED indicator fast blinking Blue and Green then the two speaker will pair to each other automatically ( The other speaker will be as SLAVE speaker and playback right channel)
3. Once paired, Master and slave speaker LED indicator turn solid blue

Disconnect the True Wireless Stereo connection
Press” M” mode button on one of the speaker until LED Indicator fast blinking Blue to disconnect the True Wireless Stereo connection.

Note

• “W-KING T9” and “W-KING T9-2” are the different version speakers.
• They could not be paired in True Wireless Stereo mode.
• True Wireless Stereo speaker only works under the same Bluetooth name.

Listening music from external audio source

1. Power on the speaker.
2. Using the AUX Cable (Q3.5mm), connect your external device to AUX-in port on speaker.
3. It will automatically turn to AUX-in mode, the LED Indicator turns solid green.

Note: Under AUX-IN mode, skip songs are not workable.

LED lights Mode
Click’ ‘ button to change the LED Lights modes.

1. Musical Pulse (Pulse from bottom to top)
2. Half-circle rotation (rotate with the rhythm of the music)
3. Full-Cyclic rotation (rotation speed is automatically adjusted with the size of the music)
4. Flash rhythm (brightness flashes with the beats of the music)
5. Musical Pulse (from the middle to the upper and lower pulse)
6. Turn off the lights

Sound mode

• Double click ” ” mode button to change the sound mode. The LED indicator slowly flash blue in outdoor mode, and the LED indicator keep solid blue in indoor mode.
• Remark : This speaker’s default mode is indoor. under the USB disk and TF card mod, LED is green.

TF card reader (micro SD card)
Just simple insert your TF card into the port, the speaker can automatically turn to TF card reader mode, and play the MP3 music store in the card.

Reset the speaker
If the function buttons without working, disconnect the charging cable, place a small pin (<3mm) into the reset key and hold it for 2 seconds until the LED light off.

Specifications

• Bluetooth 5.0
• Support : A2DPV1.2; AVRCPV1.4; GAVDPV1.2; AVDTPV1.2; SPPV1.2; AVCTPV1.2
• Wireless work distance : 10 meters
• Output Power : 105dB
• Driver Unit : Diameter 102 MM outside magnet, 492, 35W x 2 Diameter 31 MM inside magnet, 80, 15W x 2
• Frequency response: 60Hz-20KHz
• Signal-to-noise ratio: ≥80DB
• Battery Type: Li-ion 7.2V 5200mAh
• DC input voltage/current : TYPE-C USB 5V/0.5A-2A
• Playtime : 24 hours (set at the lowest volume)
• Battery charge time : 6-7 hours
• Dimensions : 372193.3166mm
• Weight : 3.7 kg

Caution

• Keep the speaker and its accessories away from the reach of kids as they might cause a choking hazard.
• Keep the speaker away from fire, water, liquids, extreme heat, and strong magnetic fields.
• DO NOT use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss.
• DO NOT drop or knock the speaker on hard surfaces.
• DO NOT use chemicals or detergents to clean the speaker.
• DO NOT scrape the surface with sharp objects.
• DO NOT make unauthorized alterations to this product.

Troubleshooting

Cannot Power On

1. Make sure you use our original USB-C charging cable and 5V/2A power adapter to charge the speaker. Please DO NOT use PD charger.
2. If you use right cable and power adapter but still can’t power on, please contact our support team with your region, order number and product model.
   • Amazon email: support.amazon@w-king.com

Cannot connect with the device
Please check the following

• The Bluetooth device supports A2DP profile
• The Speaker is within 10m from the device.
• The Speaker is in pairing mode, the LED indicator blinking blue.

No Sound

• Make sure the music volume is at audible level on both your device and speaker.
• Make sure your device is successfully paired with the speaker, the LED indicator turn solid blue.

Poor sound quality
Move the device closer to this Speaker or remove any obstacle between them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>