PROZOR PRR015 192kHz Digital to Analog Audio Converter Instruction Manual

June 14, 2024
PROZOR

PROZOR - logo

192K
Digital to Analog Audio Converter
Model: PPR015

USER MANUAL

PROZOR PRR015 192kHz Digital to Analog Audio Converter
-
192kHz DAC Converter
Optical to 3.5mm Audio Converter

PROZOR PRR015 192kHz Digital to Analog Audio Converter -
cable

  1. PROZOR 192kHz DAC Converter
  2. Optical Cable(1m/3ft)
  3. USB Power Cable
  4. User Manual

Overviews

PROZOR PRR015 192kHz Digital to Analog Audio Converter -
cable1

Plaase set your tv audio output format 1o PCMILPCM
PROZOR 192kHz DAC is designed for professional audio signal processing. It can easily convert SPDIF optical interface to 3.5mm analog audio interface for computer speakers and 3.5mm headphone. It supports digital PCM 2.0ch audio format, Please kindly set your devices such as HD TV, TV Box, or game console into PCM audio before using, NOT support DTS Dolby ac-3 and other 5.1ch digital audio.

Panel Descriptions

PROZOR PRR015 192kHz Digital to Analog Audio Converter -
panel

  1.  Optical Digital Audio Input Interface.
    Connect to HDTV)

  2. Power Indicator

  3. DC 5V Power Interface, Please connect to DC 5V 1A official standard adaptor.

  4. Volume Control, Adjust the volume of 3.5mm audio jack.

  5.  3.5mm Audio Jack, Analog Audio Output Interface. (Connect to computer speakers or 3.5mm headphone)

3.5mm output signal amplitude
Test signal frequency: 1Khz/0DB;
Electronic load: 33 ohms
Output power: 8.7mW
Output level: 4.0Vp-p

Connection and Operation

PROZOR PRR015 192kHz Digital to Analog Audio Converter -
panel1

  1. Use the optical cable to connect HDTV and other playback devices to the optical interface of PROZOR DAC. (Please kindly set your HDTV into PCM.)
  2. Use the 3.5mm audio cable to connect PROZOR DAC to stereo audio system.
  3. Use the USB cable to connect the power interface of PROZOR DAC converter to the official standard DC 5V/1A power supply.

Note

“Dolby/DTS” is not supported. When connecting 3.5mm audio output, set HD devices audio format to “PCM”.
path settings: device main page → system settings → image and sound → sound settings → digital audio output →PCM.

  1. When using TV optical out, set audio format to “PCM”.
    A.Samsung TV path settings
  1. PCM format: Settings → Sound → Expert Settings →Audio Format → PCM
  2. External speakers: Settings → Sound → Select Speaker → Optical
    B.LG TV path settings
  3. PCM setting path: Menu → Al Settings → Sound → Optical → Single Sound Out → PCM
  4. If you need to synchronize the output of the TV speakers and optical: Menu →All Settings → Sound Out → Optical → Internal TV Speaker + Optical
  1. If the volume (from PROZOR DAC output) is not loud enough, please connect the output of DAC with low-impedance cellphone headset, headphone amplifier, or power amplifier.
  2. If it does not compatible with Netflix, Amazon Prime, YouTube, please go to TV audio settings and change the digital audio output from “auto” to “PCM”.

PROZOR PRR015 192kHz Digital to Analog Audio Converter -
icon

FAQ

1.No sound?

Please kindly set your devices such as HD TV, TV BOX, or game console into PCM audio before using. NOT support DTS Dolby ac-3 and other 5.1ch digital audio. PCM Setting Path: Device homepage — system setting — image and sound — voice setting — digital audio output — PCM

2.Noise?

  1. Please use a separable 5V 1A power adapter to connect the USB cable to power the DAC. Power supply: USB Power Cable -- Separable 5V 1A Standard Plug -- Power outlet. 2) Replace the 3.5mm audio cable with a shielded cable. 3) Check if the 3.5mm audio cable is fully connected.

3. Broken voice?

  1. Check whether the optical cable pin let out the red light normally after it is connected to the input device (such as HDTV), and whether the optical connector is connected to the optical socket normally. 2) Try replacing a optical cable to connect. 4. Can't directly use the volume button of the TV remote control to adjust the output volume of POROZR DAC? The TV is connected to the sound system through the optical interface, so the volume button on the remote control cannot be directly used to adjust the output volume of the TV optical. (If the TV supports this feature which depends on the TV itself ) The TV optical output volume can be adjusted on the Settings of the TV system. For example, one of SONY's TV setting path: Settings — sound Settings — advanced Settings — all — digital audio output volume.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals