PROZOR PRR016 Digital to Analog Audio Converter User Manual
- June 14, 2024
- PROZOR
Table of Contents
PRR016 Digital to Analog Audio Converter
User Manual
PRR016 Digital to Analog Audio Converter
Package Contents
- PROZOR 192kHz DAG Converter
- 0ptical Cable(1m/3ft)
- USB Power Cable
- User Manual
Overview
PROZOR audio converter can auto convert optical/coaxial channel (Support LPCM/
PCM/RAW) input to 2.0 channel analog audio output, and convert Dolby AC-3/DTS
(include 5.1 RAW digital audio streaming).
So it is widely used in families, schools, squares, concert halls, cinemas and
other public places to enjoy the shock effect of DTS or Dolby AC-3.
Panel Descriptions
- DC 5V Power Interface, Please connect to DC 5V 1 A official standard adaptor.
- Power Indicator
- Optical Digital Audio Input Interface. (Connect to HDTV)
- Coaxial Digital Audio Input Interface. (Connect to HDTV)
- Volume Control, Adjust the volume of 3.5mm audio jack.
- 3.5mm Audio Jack, Analog Audio Output Interface. (Connect to computer speakers or 3.5mm headphone)
- RCA Interface, Analog Audio Output Interface.
(Connect to the power amplifier and other audio system.)
3.5mm and RCA output signal amplitude
Test signal frequency: 1Khz/0DB; Electronic load: 32 ohms
Output power: 17mW
Output level: 5.55Vp-p
Connection and Operation
- Use the optical cable or coaxial cable to connect HDTV and other playback devices to the optical or coaxial interface of PROZOR DAC. (Please kindly set your HDTV into PCM.)
- Use the RCA cable or 3.5mm audio cable to connect PROZOR DAC to stereo audio system.
- Use the USB cable to connect the power interface of PROZOR DAC converter to the official standard DC 5V/1A power supply.
Note
When connecting RCA or 3.5mm audio output, set HD devices single sound out to “Optical”. path settings: device main page→ system settings → image and sound → sound settings→ single sound out → optical.
-
When using TV optical out, set audio format to “Optical”.
A. Samsung TV path settings
External speakers: Settings → Sound → Select Speaker → Optical
B.LG TV path settings
External speakers: Menu → All Settings → Sound → Single Sound Out → Optical -
If the volume (from PROZOR DAC output) is not loud enough, please connect the output of DAC with low-impedance cellphone headset, headphone amplifier, or power amplifier.
-
Compatible with Netflix, Amazon Prime video, YouTube.
FAQ
1.No sound?
You can set your devices such as HD TV, TV BOX, or game console into PCM audio before using. PCM Setting Path: Device homepage » system setting -» image and sound -» Sound setting -» Single Sound Out -» Optical » PCM
2.Noise?
- Please use a separable 5V 1A power adapter to connect the USB cable to power the DAC. Power supply: USB Power Cable -- Separable 5V 1A Standard Plug -- Power outlet. 2) Replace the RCA or 3.5mm audio cable with a shielded cable. 3) Check if the RCA or 3.5mm audio cable is fully connected.
3. Broken voice?
- Check whether the optical cable pin let out the red light normally after it is connected to the input device (such as HDTV), and whether the optical connector is connected to the optical socket normally. 2) Try replacing a optical cable to connect.
4. Can't directly use the volume button of the TV remote control to adjust the output volume of POROZR DAC?
The TV is connected to the sound system through the optical interface, so the volume button on the remote control cannot be directly used to adjust the output volume of the TV optical. (If the TV supports this feature which depends on the TV itself) The TV optical output volume can be adjusted on the Settings of the TV system. For example, one of SONY's TV setting path: Settings -> sound Settings -» advanced Settings -, all -» digital audio output volume.
MADE IN CHINA Model: PST016
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>