SOAR SR-DCS1 Alarm Clock LED Wireless Speaker User Manual
- June 14, 2024
- Soar
Table of Contents
Alarm Clock LED Wireless Speaker
User Manual – Black and White
Thank you for choosing the SOAR LED Alarm Clock & Wireless Speaker. Reliable
Alarms, high quality audio, and ambiance for any occasion. Please familiarize
yourself with the Bluetooth® functionality of your smartphone or device before
use.
Contents : LED Alarm Clock & Wireless Speaker, Micro USB Charging Cable, User
Manual
PRODUCT KEY
- Lighting Button
- Alarm 1
- Alarm 2
- Power / Play / Pause
- Previous Track
- Next Track
- Mode – Mode
- Volume Knob
- AUX Port
- SD Port
- Charging Port
- Speaker
SPECIFICATIONS
Bluetooth” Version 5.0
Output Power Sw
Battery = :3.7v /1200mah
Play Time :3-4h
Charging time ‘4h
Features : BT, AUX, TF, FM
Dimensions :73mm 65mml65mm
Input : Micro USB
Material : ABS
PAIRING
- Turn on the device and select BT mode with the “M” button (7). The Bluetooth™ logo will keep flash until paired.
- Activate Bluetooth™ on your audio device and select “Soar DCSI” in the pairing list. The Bluetooth™ logo will stop flashing when paired.
- The speaker will automatically connect to the last device it last paired with when put in Bluetooth™ mode.
PHONE CONTROLS
To answering incoming calls press the play/pause button(4). To end a call press the play/pause button(4) again. To reject a call hold down the play/pause button(4) for 2 seconds.
AUDIO FORMATS
Press the Multifunction button(7) to cycle through Bluetooth™, FM, Clock Mode.
To play music from a 3.5mm AUX cable or SD card, insert and the speaker will
recognize it automatically and start playing.
FM RADIO
– Press Previous Track / Next Track Buttons (5/6) to manually flip through
raido stations.
CHARGING
– Place the Micro USB end of the provided charging cable in to the Micro USB
port(Il) of your speaker. Connect the other end to a suitable 5V USB wall
charger or computer port. ;
– The charging indicator light will be red when the speaker is charging. When
fully charged the light will turn off. Le voyant de charge sera rouge lorsque
le haut-parleur est en charge. Une fois complétement chargée, la lumiére
s’éteindra.
AUDO CONTROLS
Press the play/pause button(4) to start or stop your music.
Press the skip track button(6) to play the next track.
Press the previous track button(5) to play the previous track.
SETTING TIME
Press and hold the Multifunction Button(7) until the hour time on the screen starts to flash. Press Previous Track / Next Track Buttons (5/6) to change the hour. Press the Multifunction Button(7) again to set the minutes. Next the minutes will start to flash, repeat to set minutes.
SETTING ALARM
Press and hold the Alarm Button (2 or 3) until the icon on the screen starts
to flash.
Press the Previous Track / Next Track Button (5/6) to select the hours. Press
Alarm Button (3 or 2) to set. Repeat for minutes.
Press the Alarm Button (2 or 3) again to select the tone of the Alarm. The
speaker has two tones saved, select with Previous Track / Next Track (5/6). To
save the selected tone press the Alarm Button (2 or 3) again.
To turn your alarm on or off press the Alarm Button (2 or 3). The
corresponding light on the front of your display will turn on or off.
WARNING
This device is not a toy and should be kept away from children. The product must not be dropped or subjected to impact. Do not use the device in humid environments or in extremely hot / cold temperatures. Do not use chemicals or abrasive detergents to clean the product. Please return for repairs if the product is defective. The warranty is invalid if the product has metal rust, water damage, or other natural oxidation.
WARRANTY
This product has a 1 year warranty against defects in manufacturing under
regular consumer use. For instructions about how to obtain warranty service
for your product, please contact Customer Service:
info@primebrandsgroup.com.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. This product is compatible with all wireless audio
devices, Bluetooth” and non-Bluetooth”.
FCC Statement
FCC ID : 2AMD8-SR-DCS1
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjcct to
the following two conditions: (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device
can be used be in portable exposure without restriction.
©2023 Prime Brands Group. All rights reserved. All trade names are registered
trademarks of the respective manufactures listed. Made in China. ©2023 Prime
Brands Group. Tous droits reserves. Tous les noms commerciaux sont des marques
de commerce enregistrees des manufacturiers respectifs identifies. Fabrique en
Chine.
Prime Brands Group • Brooklyn, NY 11232 • SHOPSOAR.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>