SOAR SR-WCL Wireless Charging LED Lamp User Manual
- October 30, 2023
- Soar
Table of Contents
SR-WCL – LED Cup Charger
User Manual – Black and White Printing
Wireless Charging
LED Lamp USER MANUAL
TROUBLESHOOTING
If your device won’t charge, please try removing your phone case. While our wireless charging is case friendly, a very thick case (above 25″ thick,) can disrupt charging transmission. Additionally, if you have any mounting magnets on your phone, that may also disrupt an effective charge.
SPECIFITIONS
Input
: 9V/2A – 5V/2A
Wireless Charger Output : SW/7.5W/10W
Transmission Distance
: <6MM USB-C Charging Cable : 3.28FT
**** WARNING
This device is not a toy and should be kept away from children. The product must not be dropped or subjected to impact. Do not use the device in humid environments or in extremely hot / cold temperatures. Do not use chemicals or abrasive detergents to clean the product. Please return for repairs if the product is defective. The warranty is invalid if the product has metal rust, water damage, or other natural oxidation.
WARRANTY
This product has a1 year warranty against defects in manufacturing under
regular consumer use. For instructions about how to btain warranty servie
foryour product lease contact Customer Service:
[email protected].
This device compleswith part 15 of the FCC Rules. Operaion i subjet toth
folowing two conditios: (0 This device may not cause harmful inteference, an
(2 tis device must accept any interference received, ncluding interference
that may amuse undesired operation.
COMPATIBILITY
Suppors all wirelss chaging and i enaled device. Incucing: Phone 14114 Plusf4
Profi Pro MaPhone B3 mini13Prf13ProMax/Phone 272 mii2 ro12Pro Max/ /1o
roMax/AS MAXPXRIXS/X /88 PLsSEZ Samsung oy PO/ S204/S10/I0+/SIE/S36any Note
20/204/10/0+/S3/S9+/8/S6 GoglePie 4/XL/331L, Google e ;1 G/ pluS6/5 Edge/S
EdgePus/HotoDroid Turb, Nexus 574, Nokia Luia 020/520/92 Drid i P R | M E |
2023 Prime Brands Group. All rights reserved
All trade names are registered trademarks of the 0 [EBl respective
manufactures listed. Made in China. Prime Brands Group * Brooklyn, NY 11232
SHOPSOAR.COM
Thank you for choosing the SOAR Wireless Charging LED Lamp. High speed
charging and vibrant LED lighting for your home or office. Please familiarize
yourself with the wireless charging functionality of your smartphone or device
before use.
Contents : Wireless Charging LED Lamp, Micro USB Charging Cable, User Manual
PRODUCT KEY
- LED Lamp
- ON / OFF Button
- Adjustable Light Neck
- Micro USB Charging Cable
- Stationery Cup
- LED Indicator Light
- Wireless Charging Pad
- Micro USB Power Input
ON/OF
To power on the Wireless Charging LED Lamp use the included Micro USB cable (4). Plug the Micro USB end into the Micro USB power input port (8) on the back of your lamp. Plug the USB end into a suitable 5V wall charger or port. When the product is powered on the LED indicator light (6) wil light up red. To turn on, off, and cycle through the brightness levels of your LED lamp press the ON / OFF Button (2) on the top of the light. Continue to press the ON / OFF Button (2) until you find the perfect level of illumination for your specific needs
CHARGING
Once your Wireless Charging LED Lamp is plugged in and the LED indicator light
(6) is activated, simply place your smartphone or device onto the wireless
charging pad (7).
Your smartphone o device will automatically begin charging, and the LED
indicator light (6) will change from red to blue.
The Wireless Charging Stationery Cup is compatible with nearly all wireless
charging and qi enabled devices. (see back for a list).
FUNCTION
Fill your stationery cup with pens, pencils, scissors, change, hard candy, or
anything else convenient to have on hand.
Compatible with nearly all phone cases. Wireless charging transmission
distance will power phones through them,
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.