HAWHAFF 81P0EXK8L8L Sleep Headphones Bluetooth Headband Headphones User Manual
- June 14, 2024
- HAWHAFF
Table of Contents
USER MANUAL
Feature
- 5.2 Bluetooth Version. Compatible with any Bluetooth enabled devices.
- Built-in microphone for answering phone.
- Hand- washable after removing the Bluetooth modules
- Lifetime Warranty and 24 hours friendly customer service.
Specifications
- Bluetooth Version: V 5.2
- Transmission Distance: 33ft(10m)-49ft(15m).
- Rechargeable Lithium Battery: 180mAH
- Charge lnput: 5V/0.1A
- Charging Time: 2-2.5 hours
- Working Time: 10-12 hours
Package Included:
- Sleep Headphones Headband x1,
- Charging Cable x1,
- User Manual x1,
- Customer Service Card x1
Reminder:
Please note that the 3.5mm audio cable is not included and the new version of
the product no longer supports the use.
For warranty service or support, Please contact our Service Team, Fullest
promises: FREE RETURN.FREE REPLACEMENT Or FULL REFUND to solve your issue and
make you satisfied.
Please contact our customer service email.
Sleeptour2016@gmail.com
Function Summary
- LED Status Light
- Volume Down/ Next Track
- On /Off /Play /Pause /Answer
- Volume Up /Previous Track
Control
| Power On/Off | Press and hold for 3 seconds | |
|---|---|---|
| Play/Pause Music | Press once | |
| Volume Up/Down | Press and hold during music playing | |
| Next Track | Press once | |
| Previous Track | Press once | |
| Answer/End Phone Call | Press once when phone ringing | |
| Reject Call | Press and hold for 3 seconds | |
| Switch to Mobile Device | Press and hold for 3 seconds |
How to connect?
- Turn on Bluetooth on device.
- Turn on the sleep headphones headband Press power button for 3 seconds until red and blue lights blink. On your device, go to Bluetooth settings and choose BT-DLAB.
- Connect to Bluetooth(Name: BT-DLAB) on device
| LED Color | Status |
|---|---|
| Rapidly flashing blue and red | Pending to be Connected |
| Red and blue lights disappear | Connected |
Warning: Do not attempt to power on or connect the device while charging
The Bluetooth transmitter is disabled while it is charging, thus you will not
be able to connect while charging.
Warning: When turned on, the sleep headphones headband will automatically
connect to the last connected device if available. If no previously paired
device detected, it will keep pairing mode.
Warning: Only one Bluetooth connection is allowed, if user want to
connect to another device, please make sure to cancel the previous device
Warning: Please don’t charge over 3hours ,charge over 3 hours would damage the
battery.
Devices Name: BT-DLAB
CHARGER AND BATTERY
Slide cable out through the slit to connect to USB. Before using a different charger, check whether the specifications of the charger meet requirements. The recommended output voltage of the charger is DC5V+/-0.25V, and the recommended output current is 100 mA to 500 mA. A higher charging voltage may damage the device. Do not use the sleep headphones headband while charging. Please do not charge for a long time to avoid overheating or damage to the lithium battery. The sleep headphones headband will charging with any USB-C cable. Connect the USB-C cable to USB charger (or computer USB port)
- Please try to restart your device if the headphones headband keep cutting out.
- If you hear a low volume when you connect for the first time, try to adjust the volume key on your phone or tablet.
How to use the headband answer calls?
Please select agreement for the first time use.
Step 1:
How to sync volume with phone?
Step 2:
How to rename?
Want to connect with a new phone.
How to prevent automatic connection with last used phone?
Please note that you MUST remove the control panel & speaker before washing
the sleep headphones headband.
How to wash Bluetooth Headband?
- Do not expose sleep headphones headband to liquid or moisture.
- Do not store sleep headphones headband near acidic or alkaline material.
- Do not keep sleep headphones headband close to the fire. Do not tumble dry.
- Please remove the Bluetooth module before washing. After completely dried, put back to their original position.
- The speakers can be adjustable, you can adjust it to the best place until they fit for your ears!
- Please charge the sleep headphones headband when you receive it.
- Please turn off Bluetooth function to save power when not working.
- Please note that a ‘DI DI DI’ sound will be heard when reaches max/min volume level.
- Please try to restart your device if the sleep headphones headband keep cutting out.
- lf you hear a low volume when you connect for the first time, try to adjust the volume key on your phone or tablet.
For warranty service or support,Please contact our Service Team, Fulext
promises: FREE
RETURN.FREE REPLACEMENT or FULL REFUND to solve your issue and make you
satisfied IC ID:
28103-PTL01/28103-PES01/29106-LAS01/29091-JOS01/29105-VES01
Model Number:
PTLO1/PESO1/PTLO2 /PTLO3/PTLO4//PTL05/ PTLO6 /PTLO7 /PTLO8//PTL09 / PTL10
/PTL11/ PTL12//PTL13/PTL14/VOEB01/VOE-BTHD520//POSH01/POSHO2/FULHO1/
FULHO2//FULH03 /FULHO4/FULHO5/FULHO6//FULHO7/ AHO01/LAHO02 /LAHO03//LAH004/
LAH005/LAHO06 /LAHO07//LAH008/NAH01/NAHO02/ NA011//Na012/NA013/NA014/NA015
FCC ID
2A4HN-PES01
2A4HR-LAH001
2A4HU-VOEB01
2A4HV-BDEM01
IC Caution:
Radio Standards Specification RSS-Gen, issue 5 – English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any
interference, including interference that may cause undesired operation of the
device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits fora Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Customer Service Email:
Sleeptour2016@gmail.com