AEG SCE818C5TC Fridge Freezer User Manual
- June 8, 2024
- AEG
Table of Contents
SCE818C5TC
USER MANUAL
Fridge Freezer
SCE818C5TC Fridge Freezer
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it. Visit our website
to:
| Get usage advice, brochures, trouble shooter, service and repair
information: www.aeg.com/support
---|---
| Register your product for better service:
www.registeraeg.com
| Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service
Centre, ensure that you have the following data available: Model, PNC, Serial
Number. The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Children and vulnerable people safety
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
- This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
- Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
- Children should be supervised to ensure that they do not play with the appliance.
- Children shall not carry out cleaning and user maintenance of the appliance without supervision.
- Keep all packaging away from children and dispose of it appropriately.
General Safety
- This appliance is for storing food and baverages only.
- This appliance is designed for single household domestic use in an indoor environment.
- This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
- To avoid contamination of food respect the following instructions:
- do not open the door for long periods;
- clean regularly surfaces that can come in contact with food and accessible drainage systems;
- store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- Do not use water spray and steam to clean the appliance.
- Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
- When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified person must install this appliance.
- Remove all the packaging.
- Do not install or use a damaged appliance.
- Do not use the appliance before installing it in the built-in structure due to safety manner.
- Follow the installation instructions supplied with the appliance.
- Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
- Make sure the air can circulate around the appliance.
- At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
- Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
- Do not install the appliance close to radiators or cookers, ovens or hobs.
- Do not expose the appliance to the rain.
- Do not install the appliance where there is direct sunlight.
- Do not install this appliance in areas that are too humid or too cold.
- When you move the appliance, lift it by the front edge to avoid scratching the floor.
- The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately.
Electrical connection
WARNING! Risk of fire and electric shock.
WARNING! When positioning the appliance, ensure the supply cord is not
trapped or damaged.
WARNING! Do not use multi-plug adapters and extension cables.
- The appliance must be earthed.
- Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
- Always use a correctly installed shockproof socket.
- Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
- The mains cable must stay below the level of the mains plug.
- Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
- Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Use
WARNING! Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a
high level of environmental compatibility. Be careful not to cause damage to
the refrigerant circuit containing isobutane.
- Do not change the specification of this appliance.
- Any use of the built-in product as freestanding is strictly prohibited.
- Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
- If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
- Do not let hot items to touch the plastic parts of the appliance.
- Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
- Do not store flammable gas and liquid in the appliance.
- Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
- Do not touch the compressor or the condenser. They are hot.
- Do not remove or touch items from the freezer compartment if your hands are wet or damp.
- Do not freeze again food that has been thawed.
- Follow the storage instructions on the packaging of frozen food.
- Wrap the food in any food contact material before putting it in the freezer compartment.
Internal lighting
WARNING! Risk of electric shock.
- This product contains a light source of energy efficiency class F.
- Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
Care and cleaning
WARNING! Risk of injury or damage to the appliance.
- Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
- This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
- Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
Service
- To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
INSTALLATION
WARNING! Refer to Safety chapters.
- Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee.
- The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
- Door gaskets will be available for 10 years after the model has been discontinued.
Disposal
WARNING! Risk of injury or suffocation.
- Disconnect the appliance from the mains supply.
- Cut off the mains cable and discard it.
- Remove the door to prevent children and pets to be closed inside of the appliance.
- The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
- The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
- Do not cause damage to the part of the cooling unit that is near the heat exchanger.
WARNING! Refer to installation instruction document to install your
appliance.
WARNING! Fix the appliance in accordance with installation instruction
document to avoid a risk of instability of the appliance.
Dimensions
Overall dimensions ¹
H1 | mm | 1769 |
---|---|---|
W1 | mm | 556 |
D1 | mm | 549 |
¹ the height, width and depth of the appliance without the handle
Space required in use ²
H2 (A+B) | mm | 1816 |
---|---|---|
W2 | mm | 560 |
D2 | mm | 552 |
A | mm | 1780 |
B | mm | 36 |
² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
Overall space required in use ³
H3 (A+B) | mm | 1816 |
---|---|---|
W3 | mm | 780 |
D3 | mm | 1085 |
³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment
Location
To ensure appliance’s best functionality, you should not install the appliance
in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or
in a place with direct sunlight. Make sure that air can circulate freely
around the back of the cabinet. This appliance should be installed in a dry,
well ventilated indoor position. This appliance is intended to be used at
ambient temperature ranging from 10°C to 43°C.
The correct operation of the appliance can only be guaranteed within the
specified temperature range.
If you have any doubts regarding where to install the appliance, please turn
to the vendor, to our customer service or to the nearest Authorised Service
Centre.
It must be possible to disconnect the appliance from the mains power supply.
The plug must therefore be easily accessible after installation.
Electrical Connection
CAUTION!
Any electrical work required to install this appliance should be carried out
by a qualified electrician or competent person.
WARNING! This appliance must be earthed. The manufacturer declines any
liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following
code:
The wires in the mains lead are coloured in accordance with the following code:
- A – green and yellow: Earth
- C – brown: Live
- D – blue: Neutral
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
- Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow.
- Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black.
- Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red.
- Check that no cut, or stray strands of wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
- Switch on the appliance. The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock)
hazard. Ensure that it is disposed of safely.
Ventilation requirements
The airflow behind the appliance must be sufficient.
CAUTION! Refer to the installation instructions for the installation.
Door reversibility
Please refer to the separate document with instructions on installation and door reversal.
CAUTION! At every stage of reversing the door protect the floor from scratching with a durable material.
CONTROL PANEL
- Display
- Freezer Temperature warmer button
- Freezer Temperature colder button
- OK
- Mode
- Fridge Temperature warmer button
- Fridge Temperature colder button
- ON/OFF
It is possible to change predefined sound of buttons by pressing together Mode and temperature colder button for a few seconds. Change is reversible.
Display
A. Fridge compartment indicator
B. Timer indicator /Temperature indicator
C. ON/OFF indicator
D. Coolmatic function
E. Holiday mode
F. Frostmatic function
G. Temperature indicator
H. Freezer compartment indicator
I. Alarm indicator
J. Child Lock function
K. Drinks Chill function
L. DYNAMICAIR function
Switching on
- Connect the mains plug to the power socket.
- Press the appliance ON/OFF if the display is off. The temperature indicators show the set default temperature.
To select a different set temperature refer to “Temperature regulation”. If “dEMo” appears on the display, refer to “Troubleshooting” .
Switching off
-
Press the appliance ON/OFF for 3 seconds.
The display switches off. -
Disconnect the mains plug from the power socket.
Temperature regulation
Set the temperature of the appliance by pressing the temperature regulators. Recommended set temperature is:
- +4°C for the fridge
- -18°C for the freezer
The temperature range may vary between -15°C and -24°C for freezer and between
2°C and 8°C for fridge.
The temperature indicators show the set temperature.
The set temperature will be reached within 24 hours.
After a power failure the set temperature remains stored.
Switching on the fridge
To switch on the fridge it is enough to press the fridge temperature
regulator.
To switch on the fridge in the other way:
-
Press Mode until the corresponding icon appears.
The Fridge OFF indicator flashes. -
Press OK to confirm.
The fridge OFF indicator goes off and the fridge compartment is switched on.
To select a different set temperature refer to “Temperature regulation”.
Switching off the fridge
It is possible to switch off only the fridge compartment maintaining the freezer on.
- Press Mode until the fridge compartment indicator appears. The fridge OFF indicator and the fridge compartment indicator flash. The fridge temperature indicator shows dashes.
- Press OK to confirm. The fridge OFF indicator is shown and the fridge compartment is switched off.
Coolmatic function
If you need to insert in the fridge compartment a large amount of warm food, for example after doing the grocery shopping, we suggest activating the Coolmatic function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.
- Press the Mode until the corresponding icon appears. The Coolmatic indicator flashes.
- Press the OK to confirm. The Coolmatic indicator is shown. The fan activates automatically for the function duration.
This function stops automatically after approximately 6 hours. You can deactivate the Coolmatic function before its automatic end by repeating the procedure or by selecting a different fridge set temperature.
Holiday mode
This mode allows you to keep the fridge compartment empty during a long holiday period reducing the formation of bad odours while the freezer compartment can work normally.
- Press the Mode until the corresponding icon appears. The Holiday indicator flashes. The temperature indicator shows the set temperature.
- Press the OK to confirm. The Holiday indicator is shown.
This mode switches off after selecting a different temperature.
Frostmatic function
The Frostmatic is used to perform prefreezing and fast freezing in sequence of
Freezer compartment. This function accelerates the freezing of fresh food and,
at the same time, protects foodstuffs already stored from undesirable warming.
To freeze fresh food activate the Frostmatic function at least 24 hours before
placing the food to complete prefreezing.
- To activate this function press the Mode button until the corresponding icon appears. The Frostmatic indicator flashes.
- Press the OK button to confirm.
The Frostmatic indicator is shown. This function stops automatically after 52 hours.
You can deactivate the Frostmatic function before its automatic end by repeating the procedure until the Frostmatic indicator turns off or by selecting a different set temperature.
DYNAMICAIR function
The refrigerator compartment is equipped with a device that allows rapid
cooling of food and keeps more uniform temperature in the compartment.
This device activates automatically when needed or manually. To switch on the
function:
- Press the Mode button until the corresponding icon appears. The DYNAMICAIR indicator flashes.
- Press the OK button to confirm. The DYNAMICAIR indicator is shown.
To switch off the function repeat the procedure until the DYNAMICAIR indicator
goes off.
If the function is activated automatically the DYNAMICAIR indicator is not
shown (refer to “Daily use”).
The activation of the DYNAMICAIR function increase the energy consumption.
The fan stops when the door is open and restarts immediately after the door
closing.
ChildLock function
Activate the ChildLock function to lock the buttons from unintentional operation.
-
Press Mode until the corresponding icon appears.
The ChildLock indicator flashes. -
Press OK to confirm.
The ChildLock indicator is shown. To deactivate the ChildLock function, repeat the procedure until the ChildLock indicator goes off.
DrinksChill function
The DrinksChill function is to be used to set an acoustic alarm at the
preferred time, useful for example when a recipe requires to cool down food
products for a
certain period of time.
It is also useful when a reminder is needed in order not to forget the bottles
or cans placed in the freezer for fast cooling.
-
Press Mode until the corresponding icon appears.
The DrinksChill indicator flashes. The Timer shows the set value (30 minutes) for a few seconds. -
Press the Timer regulator to change the Timer set value from 1 to 90 minutes.
-
Press OK to confirm.
The DrinksChill indicator is shown. The Timer starts to flash (min). At the end of the countdown the “0 min” indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function.
To switch off the function repeat the procedure until the DrinksChill goes off.
It is possible to change the time at any time during the countdown and at the end by pressing the Temperature colder button and the
Temperature warmer button.
High temperature alarm
When there is a temperature increase in the freezer compartment (for example
due to an earlier power failure), the alarm and freezer temperature indicators
flash and the sound is on.
To deactivate the alarm:
-
Press any button.
The sound switches off. -
The freezer temperature indicator shows the highest temperature reached for a few seconds, then the display shows the set temperature again.
The alarm indicator continues to flash until the normal conditions are restored.
If you do not press any button, the sound switches off automatically after around one hour to avoid disturbing.
Door open alarm
If the fridge door is left open for approximately 5 minutes, the sound is on
and alarm indicator flashes.
The alarm stops after closing the door. During the alarm, the sound can be
muted by pressing any button.
If you do not press any button, the sound switches off automatically after
around one hour to avoid disturbing.
DAILY USE
Positioning door shelves
The door of this appliance is equipped with runners that enable shelves/bins
to be arranged according to individual preferences.
To reposition the door shelves/bins:
- Gradually lift the shelf/bin in the direction of the arrows until it comes free.
- Place the shelf/bin in desired position and gently insert it into the runner.
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that
the shelves can be positioned as desired.
This appliance is also equipped with a shelf consisting of two parts. The
front half of the shelf can be placed under the second half to make better use
of space.
To fold the shelf:
- Take out the front half gently.
- Slide it into the lower rail and under the second half.
Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.
Vegetable drawers
There are special drawers in the bottom part of the appliance suitable for storage of fruits and vegetables.
DYNAMICAIR
The refrigerator compartment is equipped with a device that allows rapid
cooling of foods and keeps more uniform temperature in the compartment.
This device activates automatically when needed.
It is also possible to switch on the device manually when needed (refer to
“DYNAMICAIR function”).
The fan operates only when the door is closed.
Freezing fresh food
The freezer compartment is suitable for freezing fresh food and storing frozen
and deep-frozen food for a long time.
To freeze fresh food activate the Frostmatic function at least 24 hours before
placing the food to be frozen in the freezer compartment.
Store the fresh food evenly distributed in the first compartment or drawer
from the top.
The maximum amount of food that can be frozen without adding other fresh food
during 24 hours is specified on the rating plate (a label located inside the
appliance).
When the freezing process is complete, the appliance automatically returns to
the previous temperature setting (see “Frostmatic Function”).
For more information refer to “Hints for freezing”.
Storage of frozen food
When activating an appliance for the first time or after a period out of use,
before putting the products in the compartment let the appliance run at least
3 hours with the Frostmatic function switched on. The freezer drawers ensure
that it is quick and easy to find the food package you want.
If large quantities of food are to be stored, remove all drawers and place the
food on shelves.
Keep the food no closer than 15 mm from the door.
CAUTION! In the event of accidental defrosting, for example due to a
power failure, if the power has been off for longer than the value shown on
rating plate under “rising time”, the defrosted food must be consumed quickly
or cooked immediately then cooled and then re-frozen.
Refer to “High temperature alarm”.
Thawing
Deep-frozen or frozen food, prior to being consumed, can be thawed in the
refrigerator or inside a plastic bag under cold water.
This operation depends on the time available and on the type of food. Small
pieces may even be cooked still frozen.
Ice-cube production
This appliance is equipped with one or more trays for the production of
icecubes.
Do not use metallic instruments to remove the trays from the freezer.
- Fill these trays with water.
- Put the ice trays in the freezer compartment.
Cold accumulators
This appliance is equipped with cold accumulators which increase storage time
in the event of a power cut or breakdown.
To ensure the best performance of the accumulators, place them in the front
top area of the appliance.
HINTS AND TIPS
Hints for energy saving
- Freezer: The internal configuration of the appliance is the one that ensures the most efficient use of energy.
- Fridge: Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
- Do not remove the cold accumulators from the freezer basket.
- Do not open the door frequently or leave it open longer than necessary.
- Freezer: The colder the temperature setting, the higher the energy consumption.
- Fridge: Do not set too high temperature to save energy unless it is required by the characteristics of the food.
- If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
- Ensure a good ventilation. Do not cover the ventilation grilles or holes.
- Make sure that food products inside the appliance allow air circulation through dedicated holes in the rear interior of the appliance.
Hints for freezing
- Activate Frostmatic function at least 24 hours before placing the food inside the freezer compartment.
- Before freezing wrap and seal fresh food in: aluminium foil, plastic film or bags, airtight containers with lid.
- For more efficient freezing and thawing divide food into small portions.
- It is recommended to put labels and dates on all your frozen food. This will help to identify foods and to know when they should be used before their deterioration.
- The food should be fresh when being frozen to preserve good quality. Especially fruits and vegetables should be frozen after the harvest to preserve all of their nutrients.
- Do not freeze bottles or cans with liquids, in particular drinks containing carbon dioxide – they may explode during freezing.
- Do not put hot food in the freezer compartment. Cool it down at room temperature before placing it inside the compartment.
- To avoid increase in temperature of already frozen food, do not place fresh unfrozen food directly next to it. Place food at room temperature in the part of the freezer compartment where there is no frozen food.
- Do not eat ice cubes, water ices or ice lollies immediately after taking them out of the freezer. Risk of frostbites.
- Do not re-freeze defrosted food. If the food has defrosted, cook it, cool it down and then freeze it.
Hints for storage of frozen food
- Freezer compartment is the one marked with
- Good temperature setting that ensures preservation of frozen food products is a temperature less than or equal to -18°C. Higher temperature setting inside the appliance may lead to shorter shelf life.
- The whole freezer compartment is suitable for storage of frozen food products.
- Leave enough space around the food to allow air to circulate freely.
- For adequate storage refer to food packaging label to see the shelf life of food.
- It is important to wrap the food in such a way that prevents water, humidity or condensation from getting inside.
Shopping tips
After grocery shopping:
- Ensure that the packaging is not damaged – the food could be deteriorated. If the package is swollen or wet, it might have not been stored in the optimal conditions and defrosting may have already started.
- To limit the defrosting process buy frozen goods at the end of your grocery shopping and transport them in a thermal and insulated cool bag.
- Place the frozen foods immediately in the freezer after coming back from the shop.
- If food has defrosted even partially, do not re-freeze it. Consume it as soon as possible.
- Respect the expiry date and the storage information on the package.
Shelf life for freezer compartment
Type of food | Shelf life (months) |
---|---|
Bread | 3 |
Fruits (except citrus) | 6 – 12 |
Vegetables | 8 – 10 |
Leftovers without meat | 1 – 2 |
Dairy food: |
Dairy food:
Butter| 6 – 9
Soft cheese (e.g. mozzarella)| 3-4
Hard cheese (e.g. parmesan, cheddar)| 6
Seafood:
Fatty fish (e.g. salmon, mackerel)| 2 – 3
Lean fish (e.g. cod, flounder)| 4 – 6
Shrimps| 12
Shucked clams and mussels| 3-4
Cooked fish| 1-2
Meat:
Poultry| 9 – 12
Beef| 6 – 12
Pork| 4 – 6
Lamb| 6 – 9
Sausage| 1 – 2
Ham| 1 – 2
Leftovers with meat| 2 – 3
Hints for fresh food refrigeration
-
Good temperature setting that ensures preservation of fresh food is a temperature less than or equal to +4°C.
Higher temperature setting inside the appliance may lead to shorter shelf life of food. -
Cover the food with packaging to preserve its freshness and aroma.
-
Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
-
To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
-
It is recommended to defrost the food inside the fridge.
-
Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
-
To prevent food waste the new stock of food should always be placed behind the old one.
Hints for food refrigeration
- Fresh food compartment is the one marked (on the rating plate) with .
- Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
- Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
- It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
- Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
- Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
- Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
- In order to accelerate cooling down of the goods, it is advisable to turn on the fan. The activation of DYNAMICAIR allows greater homogenization of internal temperatures.
- Always refer to the expiry date of the products to know how long to keep them.
CARE AND CLEANING
WARNING! Refer to Safety chapters.
Cleaning the interior
Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brandnew product, then dried thoroughly.
CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based
cleaners as they will damage the finish.
CAUTION! The accessories and parts of the appliance are not suitable for
washing in a dishwasher.
Periodic cleaning
The equipment has to be cleaned regularly:
- Clean the inside and accessories with lukewarm water and some neutral soap.
- Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
- Rinse and dry thoroughly.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator
compartment during normal use. The defrost water drains out through a trough
into a special container at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole in the
middle of the refrigerator compartment channel to prevent the water
overflowing and dripping onto the food inside.
For this purpose use the tube cleaner provided with the appliance.
Defrosting of the freezer
The freezer compartment is frost free.
This means that there is no build up of frost when it is in operation, neither
on the internal walls, nor on the foods.
Removing CustomFlex plastic runners
-
Remove all bins, boxes and clips from the door.
-
Remove the upper rail grabbing and lifting it from the center.
-
Slide upwards the other runners to remove them (they constitute one part).
Install back all the door equipment in a reverse order.
Period of non-operation
When the appliance is not in use for long period, take the following precautions:
- Disconnect the appliance from electricity supply.
- Remove all food.
- Clean the appliance and all accessories.
- Leave the doors open to prevent unpleasant smells.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
What to do if…
Problem | Possible cause | Solution |
---|---|---|
The appliance does not operate. | The appliance is switched off. | Switch on the |
appliance.
| The mains plug is not connected to the mains socket correctly.| Connect the
mains plug to the mains socket correctly.
| There is no voltage in the mains socket.| Connect a different electrical
appliance to the mains socket. Contact a qualified electrician.
The appliance is noisy.| The appliance is not supported properly.| Check if
the appliance stands stable.
Acoustic or visual alarm is on.| The cabinet has been recently switched on.|
Refer to “Door Open Alarm” or “High Temperature Alarm”.
| The temperature in the appliance is too high.| Refer to “Door Open Alarm” or
“High Temperature Alarm”.
| The door is left open.| Close the door.
| Temperature is set incorrect‐ly.| Refer to “Control Panel” chapter.
The compressor operates continually.| Temperature is set incorrectly.| Refer
to “Control Panel” chapter.
| Many food products were put in at the same time.| Wait a few hours and then
check the temperature again.
| The room temperature is too high.| Refer to “Installation” chapter.
| Food products placed in the appliance were too warm.| Allow food products to
cool to room temperature before storing.
| The door is not closed cor‐rectly.| Refer to “Closing the door” section.
| The Frostmatic function is switched on.| Refer to “Frostmatic function”
section.
| The Coolmatic function is switched on.| Refer to “Coolmatic function”
section.
The compressor does not start immediately after pressing the “Frostmatic” or
“Coolmatic”, or after changing the temperature.| The compressor starts after
a period of time.| This is normal, no error has occurred.
Door is misaligned or interferes with ventilation grill.| The appliance is not
levelled.| Refer to installation instructions.
Door does not open easily.| You attempted to re-open
the door immediately after
closing.| Wait a few seconds between
closing and re-opening of
the door.
The lamp does not work.| The lamp is in stand-by
mode.| Close and open the door.
| The lamp is defective.| Contact the nearest Author‐
ized Service Centre.
There is too much frost and
ice.| The door is not closed correctly.| Refer to “Closing the door” section.
| The gasket is deformed or dirty.| Refer to “Closing the door” section.
| Food products are not wrap- ped properly.| Wrap the food products bet- ter.
| Temperature is setincorrectly.| Refer to “Control Panel” chapter.
| Appiance is fully loaded and is set to the lowest temperaure.| Set a higher
temperature. Refer to “Control Panel” chapter.
| Temperature set in the appli- anceis too low and the am- bient temperature
is too
high.| Set a higher temperature. Refer to “Control Panel” chapter.
Water flows on the rear plate of the refrigerator.| During the automatic de-
frosting process, frost melts on the rear plate.| This is correct.
There is too much con- densed water on the rear wall of the refrigerator.|
Door was opened too frequently.| Open the door only when necessary.
| Door was not closed completely.| Make sure the door is closed completely.
| Stored food was not wrapped.| Wrap food in suitable packaging before storing
it in the appliance.
Water flows inside the refrigerator.| Food products prevent the water from
flowing into the water collector.| Make sure that food products do not touch
the rear plate.
| The water outlet is clogged.| Clean the water outlet.
Water flows on the floor.| The melting water outlet is not connected to the
evaporatve tray above the compressor.| Attach the melting water out- let to
the evaporative tray.
Temperature cannot be set.| The “Frostmalic function or “Coolmatic function”
is switched on.| Switch off “Frostmatic function” or “Coolmatic function”
manually, or wait until the function deactivates automatically to set the
temperature. Refer to “Frostmatic function” or “Coolmatic function” section.
The temperature in the appliance is too low/loo high.| The temperature is not
set correctly.| Set a higher/lower temperaure.
| The door is not closed correctly.| Refer to “Closing the door” section.
| The food products’ temperaure is too high.| Let the food products
temperature decrease to room temperature before storage.
| Many food products are stared at the same time.| Store less food products at
the same time.
| The door has been opened often.| Open the door only ff necessary.
| The Frostmatic functionis switched on.| Refer to “Frostmatic unelion”
section.
| The Coolmatic functionis switched on.| Refer to “Coolmatic function”
section.
| There is no cold air circulalion in the appliance.| Make sure that there is
cold air circulation in the appliance. Refer to “Hints and Tips” chapter.
DEMO appears on the dis- play.| The appliance is in demon- stralion mode.|
Keep the OK key pressed for approximately 1O seconds until a long sound is
heard and the display turns off for a short time.
A or or symbol is shown instead of numbers on the temperature display.|
Temperature sensor problem.| Contact the nearest Authorized Service Centre
(the cooling system will continue
to keep food products cold, but temperature adjustment will not be possible).
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.
Replacing the lamp
The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your
Authorised Service Centre.
Closing the door
- Clean the door gaskets.
- If necessary, adjust the door. Refer to installation instructions.
- If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.
NOISES
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side
of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web
link to the information related to the performance of the appliance. Keep the
energy label for reference together with the user manual and all other
documents provided with this appliance.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any Eco Design verification shall be compliant with BS EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers to recycle it. Help protect the
environment and human health by recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked with the symbol with the
household waste. Return the product to your local recycling facility or
contact your municipal office.
222379694-B-512021
Documents / Resources
| AEG
SCE818C5TC Fridge
Freezer
[pdf] User Manual
SCE818C5TC Fridge Freezer, SCE818C5TC, Fridge Freezer, Freezer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>