AXLOIE ET5L True Wireless Sport Earbuds User Guide

AXLOIE S7

1. What’s in the Box

2 x Wireless Earbuds
1 x Charging Case
1 x USB Type-C Cale
4 x Pairs of Ear Tips (XS/S/M/L)
1 x User Manual

2. Product Overview

1. Volume +/-
2. Charging Contacts on Earbud
3. LED Indicator of Earbud
4. Multi-function Button
5. Microphone
6. LED Indicators of Charging Case
7. Reset Button
8. Type-C Charging Port

3. Precautions

• Make sure the earbuds and Type-C port of the charging case are completely dry and clean before each charge.
• Please keep the earbuds dry and clean after each use.
• Please charge the charging case every 45 days at least to extend the battery life.
• If you meet any problems during use, please contact us through the after-sales service hotline or E-mail.

4. Wearing

• Choose the ear tips that best suits your ears.
• Place the ear hooks on the ears, and then insert the earbuds into the inner ear canals.
• Adjust the earbuds to the most comfortable position.

5. Charging

• Open or close the charging case to activate the LED battery indicators.
• For the first time use, please tear off the insulation film on the charging pins of earbuds, and then fully charge the earbuds and the charging case.
• Please use the supplied Type-C cable to charge the charging case to prevent damage.
• Make sure the earbuds and Type-C port of the charging case are completely dry and clean before each charge.

6. On/Off

Open the charging case and the earbuds will turn on automatically.
Put the earbuds back into the charging case and close the charging case, the earbuds will turn off automatically.

ON OFF

Status of LED Indicator (Earbud)

| On| White light is always on for 1s.
---|---|---
| Off| Red light is always on for 1s.

• If you want to turn on the earbuds manually, press and hold the multi-function button (MFB) on both earbuds for 2 seconds until the LED indicators of the earbuds display white light for 1 second.
•  If you want to turn off the earbuds manually, press and hold the MFB on both earbuds for 5 seconds until the LED indicators of the earbuds display red light for 1 second.
• When one earbuds is turned off, the other earbud will not be turned off at the same time.

7. Pairing

True Wireless Stereo Pairing:
Open the charging case and the right earbud will pair with the left earbud automatically.

1. PAIRING

Status of LED Indicator (Earbud)

| White light flashes rapidly.| TWS pairing is going on.
---|---|---
| White light goes out.| TWS pairing is done.

Connect to Bluetooth Device:

1. Open the charging case and wait for 1 to 3 seconds. When the LED indicator on one of the earbud flashes red and white alternately it indicate that the earbuds have successfully entered the Bluetooth connection mode.
2. Turn on the Bluetooth function on your device and then click “AXLOIE S7”.
3. Wait 3 to 5 seconds until a pop-up window appears, and then click ” Pair”. After the Bluetooth connection is successful the indicators of the two earbuds go out.

Status of LED Indicator (Earbud)

| The LED indicator of the master earbud flashes red and white alternately and the secondary one flashes white light once every 3s.| Bluetooth connection is going on.
---|---|---
| The LED indicator of both earbuds go out.| Bluetooth connection is done.

The earbuds will automatically connect to your most recently connected devices (if available) when you turn on the AXLOIE earbuds each time.
To pair with another Bluetooth device, open the charging case and make sure the earbuds are being charged, then press and hold the button on the charging case for 3 seconds until the LED indicator on one of the earbuds flashes red and white alternately.

8. Control

2. Bass boost mode is unavailable in mono mode.
Player/earphone mode| Triple- click the MFB on R to switch the player mode and earphone mode.
Volume +/-| 1. Directly adjust the volume through the phone.
2. Adjust the volume through the volume +/- buttons on the side.

9. LED Indicator

“Pairing”
Connected successfully| The LED indicators of both earbuds go out.| “Connected”
Being charged (earbuds)| Breathing red light.| /
Fully charged (earbuds)| Red light goes out.| /
Low battery (earbuds)| Red light flashes every 30s.| “Battery low”
Being charged (charging case)| 0%-30% breathing (the first LED)
30%-70% always on (the first LED) + breathing (the second LED)
More than 70% always on
(The first LED & the second one) + breathing (the third LED)
Fully charged: all the LEDs are on.
Unplug: all the LEDs go out.| /
Low battery (charging case)| Lower than 10%: the first LED flashes slowly.| /

10. Internal Storage

1. Put the two earbuds into the charging case and close the cover of the case. Connect the charging case and the computer with the supplied Type-C cable. After a while, the computer will display the drive icon of AXLOIE S7 under Device and Drive area.
2. Copy the target audio files to the Music folder under AXLOIE S7. During the copying process, please do not open or move the charging case and the computer until the file transfer is done.
3. After the file transfer is done, find the drive icon in the notification area of the taskbar in the lower right corner of the computer, click to safely remove the hard drive.
4. Finally, unplug the connected Type-C cable. Open the charging case and take out the earbuds to use them normally.

11. Reset

If there are any connection or function problems with the earbuds, you can try resetting the earbuds.

1. Put the earbuds in the charging case and make sure they are being charged.
2. Keep the charging case open, and then press and hold the button on the charging case for 10 seconds until the LED indicators on the earbuds flash red light 3 times, and then turn white. AT this time, all memory data will be cleared.

12. FAQs

1. The charging case’s battery still has power, but why can’t the earphones be charged?
   A. For the first time use, please confirm weather the insulation films of the earbuds are removed when using the earbuds.
   B. Use a clean cotton cloth to wipe the charging contacts and pins (golden parts) of the earbuds and the charging case to ensure there is no resides that prevent the earbuds from being charged. (If there is sweat or any liquid on the charging contacts on the charging case and earbuds, they may be connected. Please clean and dry before putting the earbuds into the charging case.)

2. Why is there a jamming when using the earbuds?
   Due to the characteristics of Bluetooth earbuds, other electromagnetic wave interference in the use environment may cause instantaneous disconnection and jamming.

13. Specifications

mode
(16 hours in total with charging case)

• 10 hours in earphone mode
  (40 hours in total with charging case)
  Battery Capacity| 70mAh x2 (earbuds), 650mAh (charging case)
  Charging Time| 1.5 hours (earbuds), 2.5 hours (charging case)
  Input Power| 5V ⎓ 700mA
  Driver Unit Size| Φ 10mm x2
  Frequency Range| 20Hz-20KHz
  Impedance| 16 Ω
  Storage| 1 GB

Contact Us

√ Technical Support
√ Customer Service

|

√ Discount
√ Extra Warranty of 6 months
√ Online Chat
√ E-mail CEO

|

√ Giveaway
√ Coupon
√ Event

If you aren’t happy with product or hove any questions, please feel free to contact us:
US/CA: +1-888-795-8560 Mon-Fri 9:00-17:00(PST)
UK: +44-121-7900609 Mon-Fri 8:00-17:00(GMT)
DE: +49 15735989502 Mon-Fri 9:00-18:00

Model: ET5
FCC ID: 2ATWG-ET5L FCC ID: 2ATWG-ET5R
IC: 26891-AEA05
CAN ICES-3(B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation.
This device complies with CAN ICES-3(B)/NMB-3(B)

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Prolinx GmbH
Brehmstr. 56, 40239 Duesseldorf
Germany
Shenzhen Yuangu Technology Co., Ltd.

No101, 1st Factory Building, Hebei Industrial Park, Ma’antang Community, Hebei zhongang fload, Bantan Sub-district, Longgang District, Shenghen, China

Made in China

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>