TECKNET WM389 RAPTOR Prime Cordless Optical Mice User Manual

TECKNET WM389 RAPTOR Prime Cordless Optical Mice

Product Information

Product Overview

• Left Click Button
• Fire Button
• Forward Button
• Backward Button
• Right Click Button

Specifications

System Requirements
This mouse uses two AA batteries (not included).

Battery Installation:

1. Open the battery cover. Take out the USB receiver and insert it into the USB-A port on your computer.
2. Insert the batteries into the compartment, ensuring they correspond with the polarity markings.
3. Close the battery cover. Turn on the mouse by adjusting the power switch underneath the mouse. Switch it to the left, LED indicator turns off. Switch it to the right, LED indicator turns on. The blue LED power indicator at the top of the mouse will light up.

Note: Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.

Low Power Indicator
The mouse is equipped with a low-power indicator. When the battery power gets low during use, the red indicator under the DPI button will flash. Please replace the batteries.

Note: We recommend using AA alkaline dry-cell batteries.

Reconnection
There is a connection code for this mouse. High temperatures, electromagnetic fields, or vibrations may influence the code signal, and the mouse may need to be reconnected.

1. Press the left-click button and scroll the Wheel to reconnect.
2. Unplug the Nano receiver and plug it into the USB port again.

DPI Switch
Press the DPI+/DPI- Button to switch between 6 DPI levels. The LED light will flash accordingly.

Attention

• To maximize battery life, it’s recommended to use the mouse on a white or colored surface. The mouse might not work smoothly on some special surfaces, such as smooth, dark, black, reflecting, and 3D mouse pad surfaces.
• If not used, the mouse will drop into auto-sleep mode within 10 minutes. Press any key or move the mouse to reactivate.
• Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
• Avoid using the mouse on a metal surface. Metals, such as iron, aluminum, or copper, shield the radio frequency transmission and may slow down the mouse cursor response time or cause the mouse to fail temporarily.
• If your PC has a metal case that contains aluminum or magnesium, use the mouse by the side of the PC. The display panel may interfere with the radio frequency if you use the mouse directly in front of the PC.

Important Safety Instructions
Carefully follow these instructions:

1. Retain these instructions – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Package Contents

Product Overview

1. Left Click Button
2. Fire Button
3. Forward Button
4. Backward Button
5. Right Click Button
6. Scroll Wheel
7. DPI +Button
8. DPI – Button
9. Power Switch

Specifications

• Button Count: 8 buttons
• Connectivity: 2.4 GHz wireless transmission
• Receiver interface : USB version 2.0
• Operating Voltage: 3V
• Operating Current: 7mA
• Transmission Power: 0dBm

System Requirements:

• PC with a Pentium processor or equivalent AMD processor.
• USB 2.0
• Windows XP, Vista, Win7, Win8, Win10, Win11, macOS

Note : The side buttons and the software do not work with macOS.

Battery Installation

This mouse uses two AA batteries (not included).

1. Open the battery cover. Take out the USB receiver and insert it into the USB-A port on your computer.
2. Insert the batteries into the compartment, ensuring they correspond with the polarity markings.
3. Close the battery cover. Turn on the mouse by adjusting the power switch underneath the mouse. Switch it to the left, LED indicator turns off. Switch it to the right, LED indicator turns on. The blue LED power indicator at the top of the mouse will light up.

Note : Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.

DPI switch:
Press the DPI+/DPI- Button to switch between 6 DPI levels. The LED light will flash accordingly.

Low Power Indicator:
The mouse is equipped with a low-power indicator. When the battery power gets low during the period of use, the red indicator under the DPI button will flash. Please replace the batteries.

Note : We recommend you use an AA alkaline dry cell battery.

Reconnection:
There is a connection code for this mouse. High temperatures, electromagnetic fields, or vibration may influence the code signal and the mouse may need to be reconnected.

1. Press the left-click button + Scroll Wheel to reconnect.
2. Unplug the Nano receiver and plug it into the USB port again.

Attention:

1. To maximize battery life, it’s recommended to use the mouse on a white or light-colored surface. The mouse might not work smoothly on some special surfaces, such as smooth, dark, or black, reflecting, and 3D mouse pad surfaces.
2. If not used, the mouse will drop into auto-sleep mode within 10 minutes. Press any key or move the mouse to re-activate the mouse.
3. Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
4. Avoid using the mouse on a metal surface. Metals, such as iron, aluminum, or copper, shield the radio frequency transmission and may slow down the mouse cursor response time or cause the mouse to fail temporarily.
5. If your PC has a metal case that contains aluminum or magnesium, use the mouse by the side of the PC. The display panel may interfere with the radio frequency if you use the mouse directly in front of the PC.

IMPORTANT SAFETY INSTRUCTIONS
CAREFULLY FOLLOW THESE INSTRUCTIONS.

1. RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from the fire to avoid an explosion.
6. For proper insertion, please observe polarity indicators (+/-).
7. Remove the batteries if the product is not going to be used for a long period.
8. Do not place the product in or near an inflammable, explosive, or hazardous object.
9. Do not operate the product with a damaged cord or plug.
10. Do not operate the product if it has been damaged in any way.
11. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
12. Do not throw or shake the product.
13. Do not place the product in or near water, rain, excess moisture, or extreme heat.

Limited 12-Month Warranty

What does this warranty cover?
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship. What is the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECHNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit the TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit the TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product:
( Waste Electrical& Electronic Equipment )

• This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
• To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
• Users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
• Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-WM389 complies with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address: https://eu.tecknetonline.com/

Software Download
( MODEL : TK-WM389）
Multifunctional, advanced setup and macro functions can be set by the software.

Please download the software from: http://www.tecknet.co.uk\

References

• BestShop | Best Price, Smart Shopping
• TECKNET | Wireless Doorbell, Keyboard and Mouse，Headphones

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>