HOTO QWSGJ002 Household Hand Tool Set Home Tool Kit Instruction Manual

HOTO QWSGJ002 Household Hand Tool Set Home Tool Kit Instruction Manual

This manual applies to the hand tools in HOTO Household Tool Kit, HOTO Electric Screwdriver Kit, and HOTO 12V Brushless Drill Kit.

Product Overview

Please read this manual carefully before using the product and keep it for future reference.

HOTO Household Tool Kit

1. Claw Hammer
2. Rubber Hammer Cap
3. Bits Set
4. Multifunctional Screwdriver
5. HOTO Self-locking Tape Measure
6. Adjustable Wrench
7. Multifunctional Needle-Nose Pliers

HOTO Electric Screwdriver Kit

1. Claw Hammer
2. Rubber Hammer Cap
3. USB Cable
4. Bit Extension
5. Bits Set
6. HOTO 3.6V Cordless Screwdriver
7. HOTO Self-locking Tape Measure
8. Adjustable Wrench
9. Multifunctional Needle-Nose Pliers

See the manual of HOTO 3.6V Cordless Screwdriver for details of the use instructions of the HOTO 3.6V Cordless Screwdriver.

HOTO 12V Brushless Drill Kit

1. Drill Bit
2. HOTO 12V Brushless Drill
3. Multifunctional Needle-Nose Pliers
4. Adjustable Wrench
5. Claw Hammer
6. Rubber Hammer Cap
7. USB Cable
8. HOTO Self-locking Tape Measure

See the manual of HOTO 12V Brushless Electric Drill for details of the use instructions of the brushless electric drill.

How to Use

Claw Hammer

Claw hammer: The flat side of the hammer head is the striking face. It can be used for striking hard objects. It features a built-in magnetic nail starter to make it easy and safe to drive a nail. The V-shaped claw on the other side is for extracting nails. A rubber hammer cap is provided. It is recommended to install the rubber cap to prevent the surface from scratch when hammering.

1. Rubber Hammer Cap
2. Striking Face
3. Hammer Handle
4. V-shaped Claw
   

Notes

• Strike a hammer blow with the striking face parallel to the surface being struck.
• Do not strike one hammer with another.
• Do not use it when the hammer head is loose.
• Do not use it when the hammer handle is damaged.
• Do not use the rubber hammer cap for nail driving.

Multifunctional Screwdriver

Multifunctional Screwdriver: With a built-in magnet, the socket extension can magnetically hold C6.3 bits. It can also be attached to a variety of bits. The HOTO household tool kit is equipped with 10 pcs of bits for various screw tightening and removing scenarios.

• Socket Extension
• Handle
• Bits
  

Notes

• The multifunctional screwdriver uses C6.3 bits. Please use bits of proper specification.
• Ensure the screwdriver be operated vertically against the workpiece.
• Do not use the screwdriver as a crowbar or a chisel.
• Do not use the screwdrive for electrical work.

Multifunctional Needle-Nose Pliers

Multifunctional Needle-nose Pliers: It can be used to clamp and fix workpieces; twist, bend and cut metal wires; strip wires; crimp terminals, etc. It is equipped with a labor-saving spring and has a self-resetting function, making it easy to use.

1. Pliers Mouth
2. Pliers Handle
3. Crimping Groove
4. Stripping Groove

Notes

• Please wear protective goggles when cutting or tightening wires.
• Do not use the multifunctional needle-nose pliers as a hammer.
• Please take proper care of the pliers and lubricate the hinges.
• Do not use the pliers for electrical work.

Adjustable Wrench

Adjustable Wrench: 200mm long, it can be used to tighten or loose hexagon bolts or nuts. Turn the worm to adjust the width between the two jaws to clamp the nuts. This wrench applies to hexagon bolts and nuts ≤20mm.

1. Fixed Jaw
2. Movable Jaw
3. Worm
4. Handle

Notes

• When operating, the width between the two jaws must be adjusted accurately to fit the nut.
• The wrench and the nut must be kept horizontal to prevent slippage.
• Do not strike hard objects with the wrench.
• To avoid damaging the wrench, do not attempt to increase the pulling leverage by adding an extension bar or pipe to the wrench handle.

HOTO Self-locking Tape Measure

HOTO Self-locking Tape Measure: The auto-lock tape measure enables a convenient and safe operation. Pull out the blade and start measuring. The auto-lock functions allows the blade to keep extended until you press the release button, which then allows it to retract easily.

1. Release Button
2. Blade
3. Hook

Notes

• The maximum measuring range is 3 meters. Do not pull out the blade beyond the range.
• Do not touch the edge of the blade during retraction to prevent cuts.
• Do not grasp the blade to prevent cuts.
• Do not use the tape measure if the blade is broken or torn.

Specifications

• Name: HOTO Household Tool Kit
• Model: QWSGJ002
• Item Dimensions: 70×168×268 mm
• Net Weight: 1710g
• Bit Specification: C6.3×25 mm
• Philips: PH1/PH2
• Hex: PZ2
• Hollow Torx: T25
• Inner Hex: H3/H4/H5
• Flat blade: SL5
• Triangular: 2.3
• TW Type: TW1

Hammer Handle:
Glass Fiber+PP+TPE| 24 X 105 x 240mm
Multifunctional
Screwdriver| Socket Extension: CR-V SteelHandle:** PP+TPE| 1)30 X 198mm
Bits| S2 Steel| C6.3 X 25mm
Multifunctional
Needle-Nose Pliers| Pliers Body: CR-V Steel
Pliers Handle: PP+TPE| 15.6 X 55 X 169mm
Adjustable Wrench| 45#Steel| 13.6x 56.5 X 200mm
HOTO Self-locking
Tape Measure| Tape: 55#Steel Shell: ABS| 26.8 X 60 X 70mm
HOTO Household
Tool Kit| ABS| 70 X 168 x 268mm

Name: HOTO 12V Brushless Drill Kit
Item Dimensions: 91×268×270 mm
See the manual of HOTO 12V Brushless Electric Drill for details of the bit specification and drill specification}
Model: QWDZGJ001
Net Weight: 3400g

030 x 198mm
Multifunctional Needle-Nose Pliers| Pliers Body: CR-V Steel Pliers Handle: PP+TPE| 15.6 x55 x 169mm
Adjustable Wrench| 45#Steel| 13.6 x 56.5 x 200mm
HOTO Self-locking Tape Measure| Tape: 55#SteelShell: ABS| 26.8x 60 x 70mm
HOTO 12VBrushless Drill Kit| ABS| 91 x 268 x 270mm

Manufacturer: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No. 50 Moganshan Rd, Putuo District, Shanghai, PRC, 200060.

Stay tuned to our social media
(@hoto_official)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>