EVA LOGIK WF96SD Wi-Fi Dimmer Plug Instruction Manual
- June 14, 2024
- EVA LOGIK
Table of Contents
WF96SD Wi-Fi Dimmer Plug
Product Information:
The Wi-Fi Dimmer Plug is a smart dimmer plug designed for use
with seasonal and landscape lighting, porch lights, and other
indoor and outdoor plug-in small appliances. It has a maximum
loading capacity of 400W and is compatible with dimmable LED,
halogen, incandescent, and fluorescent bulbs. The plug works with
Amazon Alexa and Google Assistant for voice control and can be
operated through the free Smart Life App.
Specifications:
- IP65 Rated for outdoor use
- Overloading protection to prevent overheating
- Works with 2.4GHz Wi-Fi network and Bluetooth
Product Usage Instructions:
-
Ensure the device is suitable for outdoor use in damp locations
and not exposed to rain or water. -
Plug in the Wi-Fi Dimmer Plug to the desired power outlet.
-
To manually turn on/off your device, press the Manual/Program
button once. -
To adjust brightness, hold down the Manual/Program button.
-
The RGB LED indicator provides information about the network
configuration and device status:- Sky-blue: Network configuration mode
- Blue: Light status indicator
- Red: Network failure/overloading warning
- Purple: AP Network configuration mode
-
Use the included screw and plastic anchor to lock the plug in
the wall (optional). -
Insert the protector into the connector when not in use.
-
Download and install the Smart Life App by scanning the QR code
or searching for it on Google Play (for Android) or Apple Store
(for iOS). -
Register a new account on the Smart Life App.
-
Follow the instructions provided in the app to set up your
smart switch. -
If you encounter any trouble pairing with Amazon Echo or Google
Home, scan the provided QR code and follow the instructions. -
For Bluetooth quick-fit mode:
-
Plug the device directly into the wall outlet.
-
The device will enter Bluetooth auto-connection mode, indicated
by LED blinks. -
Turn on your phone’s Bluetooth and tap ‘+’ in the Smart Life
App to add the plug. -
Important notes:
-
Do not plug an extension cord into the smart plug.
-
Choose the most suitable network mode (Bluetooth quick-fit
Mode, Easy Mode, AP Mode) for configuring the network. -
Operate quickly when the sky-blue LED indicator blinks
rapidly. -
Complete network configuration within 3 minutes when the
indicator is flashing. -
If you fail to connect to a Wi-Fi network, try operating
several times more.
-
Wi-Fi Dimmer Plug
· WF96SD · Meet your new smart Plug !
Plug x 1 Screw x 1 Plastic Anchor x 1
IMPORTANT! This unit is suitable for outdoor use in damp locations. Do not expose to rain or immerse in water.
(A) Manual / Program button Single press: manually turn on/off
your device.
Hold: adjust brightness.
A B C
RGB LED indicator Sky-blue: Network configuration mode Blue: Light status indicator Red: Network Failure/Overloading Warning Purple: AP Network configuration mode
For outdoor use IP65 Rated
(B) Dimmer Outlet This is your smart outlet that will be included in your
smart home.
(C) Protector Insert in connector when not in use.
Introduction The EVALOGIK WF96SD is a 400W MAX Loading smart dimmer plug
designed for use seasonal and landscape lighting, porch light, and other
indoor and outdoor plug-in small appliances. It’s compatible with dimmable
LED, halogen, incandescent, and fluorescent bulbs. Works with Amazon Alexa,
Google Assistant. You can use the free App–Smart Life, or voice control by
Alexa and Google Assistant to operate your devices in your home.
Specifications
Power: 120VAC, 60Hz Item Size: 568039mm Loading : 400W Wireless Frequency:
2.4GHz Wireless Standard: IEEE802.11b/g/n Operating Temperature: -4° F~122° F
Use our screws and anchor to lock it in the wall.(optional)
Overloading protection is protection against overheating of the protected
equipment. When the device’s temperature is high, the LED will light up in red
and cut down the power. Please power off the device and use it after the
temperature of the device drops.
When the LED is purple (AP mode), please press the button 3 times quickly
until the LED change to Sky-blue and LED blinks–Back to EASY MODE.
NOTE: Do not plug an extension cord in this smart plug.
APP Connection
QR code
Smart Life
Note:
Your device needs to be installed in the network coverage of your home router.
1. Please scan the QR code to download the application “Smart Life”. 2. If
you cannot download Smart Life app, please search “Smart Life”
on Google Play (for Android phone) or Apple Store (for iOS phone) to download.
After you download the Smart Life App and register a new account, please
follow the instructions below to set up your smart switch.
3. The smart switch can be also used with Amazon Echo and Google Home. Please
scan the QR code below and follow the instructions if you have any trouble
pairing with them.
Bluetooth quick-fit Mode
1 1: Plug-in the device directly
to the wall outlet. Once pluged in, it will enter into the Buletooth auto-
connection mode.
· White LED indicator
The auto-connection comes with led blinks. The LED will blinks 3 minutes. If
it stopped, please hold the button 5 seconds until the LED blinks again.
2
3
2. Turn on your Phone bluetooth. 3: Tap `+’ to add this plug in the “Smart Life” APP.
Amazon-Echo Google-Home
Note: 1) Our products supports Bluetooth quick-fit and 2.4GHz Wi-Fi network.
2) 3 connection network modes: Bluetooth quick-fit Mode, Easy Mode, AP Mode.
Choose the most suitable mode to configure the network. 3) Please operate
quickly when the sky-blue LED indicator blinks rapidly. 4) When indicator
flash enters the network, complete standard operation within the 3 minutes. 5)
If you failed to connect with Wi-Fi network, please try to operate several
times more.
4
5
Mini Outdoor Dimmer P…
6
7
8
Mini Outdoor Dimmer P…
4: You’ll see “Devices to be added”—“Go to add”.
5: Click to “Add ” 6: Enter the Wi-Fi Password (Your
phone should have connected to the same Wi-Fi first). 7: Wait for the app to
connect to your Wi-Fi until it’s 100%. 8: Click and edit the name of switch!
When the Bluetooth is off, APP will remind:
“You are advised to
enable Bluetooth”.
1
Tap `+’ to add a device in your app
2
Select “Electrician “”Socket (Wi-Fi)”
Easy Mode
3
Enter the Wi-Fi Password
4
7
6 Press the button 3 times
Wait for it’s 100%
quickly until “sky-blue”
(LED stays in green 3 seconds.) Select “is fast blinking(0.5s/time)”
LED blinks rapidly.
100%
5
Click to “Continue ”
8
Mini Outdoor Dimmer P…
Adjust the brightness of the light.
Locks for the minimum/ maximum value
SETTING For better performance of the LED, please set a maximum /minimumbrightness value. When the bulb is at this maximum /minimum brightness value, the bulb does not flicker. The minimum brightness of different bulbs may be different.
· Restores State after Power Failure (This parameter can access you to set the plug to be on/off after power failure.)
Value=0
The plug is OFF regardless of the state prior to power failure.
Value=1
The plug is ON regardless of the state prior to power failure
Value=2 (default) Memory state before power failure This switch will be return to state prior to the power failure after power is restored.
Operation: Quickly press button 8 times.
Please note: the switching of each value is in order, a quick press button 8 times
will switch once. eg: Switching from value 0 to value 2 needs 2 switchings. · Light off State Setting (This parameter can access you to set the light fade out or off immeditaly.)
Value=1 (default) Fade out
Value=2
Instantaneous off
Operation: Quickly press button 10 times
Please note: the switching of each value is in order, a quick press button 10 times
will switch once. eg: Switching from value1 to value 2 needs 1 switching.
FCC warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
CAUTION – PLEASE READ!
This device (MP22WD) is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment. This device should never be used to control the On/Off status of Medical and/or Life Support equipment.
OTHER WARNINGS
Risk of Fire
Risk of Electrical Shock
Risk of Burns
V2.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>