HOOMEE Centre Pivot Roof Window Seal Kit Instruction Manual

**HOOMEE Centre Pivot Roof Window Seal Kit Instruction Manual

**

Clean window frame and window casement.
Stick the Velcro straps on the window frame and window casement.

Keep the window closed, stick the Velcro straps onto four sides of the window frame and window casement. **(referto 2a)

**

Remark I : If the window handle on the top blocks you to stick the Velcro on the top of the window frame, you can open the window, and then stick the Velcro on the top frame. **(refer to 2b)

**

Remark 2: When you stick the Velcro on the top window casement, please open the window first. If there is a gap between the handle and the casement, please stick the Velcro onto the window handle instead of the window casement on the top. (refer to 2c)

Prepare the window seals

Window seal without zipper
A: Curve line part
B: Straight line part (refer to 3a)

Window seal with zipper
C: Curve line part
D: Straight line part (refer to 3b)

Stick the window seal (without zipper) on the upper part of the window.

Attention: The straight side B should be always stuck to the window frame.

1. Starting from straight line side B, matching the middle of it to the center of the window frame at the top. Stick it onto the Velcro straps and along the left and right side of the window frame.
2. Stick the window seal curve line side A at the center of the window handle on the top. Stick it onto the Velcro straps and along the left and right side of the window casement. (refer to 4a).

Stick the window seal (with zipper) to the lower part of the window

Attention 1:
The straight side D should be always stuck to the window frame.

Attention 2: Make sure the back side of the window seal (you can’t see the zipper puller) faces to you and to turn the Velcro. -Refer to Images **Step 1, 2 and 3.

**

1. Keep the window half open. Starting from straight line side D, matching the middle of it to the center of the window frame at the bottom. Stick it onto the Velcro straps and along the left and right side of the window frame.
2. Stick the window seal curve line side C at the center of the window casement at the bottom. Stick it onto the Velcro straps and along the left and right side of the window casement. (refer to 5a).
   

Tips: Fold the excess seal into layers and stick them onto the Velcro. This is the best solution if the excess seal is too long.

Pinch air hose and fix the air hose with cable tie.

Pinch air hose in the window seal by using the zipper. Use cable tie to fix the air hose to the zipper if necessary.

Remark: The cable tie is reusable; you can press the trigger to unlock the cable tie if you want to remove it.

The installation is now completed and it is ready for use.

Important: How to close the window after installation?
If you want to close window after installation, please unlock the cable tie and zippers and remove the air hose. And remove both window seals from the casement.
Then you can close the window.
This prevents the window seal from being damaged as it can de clamped between the window frame and casement when closing.

Copyright by HOOMEE. Reproduction is prohibited!

Documents / Resources

| HOOMEE Centre Pivot Roof Window Seal Kit [pdf] Instruction Manual
Centre Pivot Roof Window Seal Kit, Pivot Roof Window Seal Kit, Pivot Roof Window Seal Kit, Roof Window Seal Kit, Seal Kit
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>