HOOMEE B07C986TBQ Cloth Window Seal For Portable Air Conditioner Installation Guide
- June 14, 2024
- HOOMEE
Table of Contents
HOOMEE CLOTH WINDOW SEAL FOR
PORTABLE AIR CONDITIONER
MINUTES INSTALLATION
-
Clean window frame and window casement
Please open the window and clean the surfaces of window frame and casement with warm water. Ensure the surfaceis free of any residues. This is a capital step to ensure thatthe adhesive Velcro straps stick perfectly on surfaces. -
Stick the Velcro straps on the window frame
Cut the Velcro straps for proper length and open the Velcro fastener and stick straps to four sides of the window frame. Remark: When you open the window. if thereis no gap between window frame and window casement. then youcan consider to stick only three open sides instead of four sides.
Warning: Never stick Velcro straps onto the area where the window closes. Window must still be able to close! -
Stick the Velcro straps on the window casement
Stick Velcro straps to the outside of the inward open window casement (refer to 3a). For certain window types. one option for youis to install the Velcro straps onthe side of the window casement (Refer to 3b).
Be sure that the window still be able to close and the sticky tape doesn’t damage the window frames!
If it is outward open window. stick the Velcro straps tothe inside window casement (refer to 3c). -
Prepare the window seal
This cloth window seal is designed for double hoses. Please lay the cloth window seal flat onthe ground. Wide side A: Curve line part Narrow side B: Straight line part. zipperis near. -
Stick Wide Side A to the Velcro straps on the window frame
ALWAYS stick the wide side A of the cloth window sealto the window frame.
Start from the middle of the window seal, match the center of the window frame and stick it onto the Velcro straps, and thento the left and right or to the up and down side. -
Stick Narrow Side B to the Velcro straps on the window casement
ALWAYS stick the narrow side 8 to the outside of the inward open casement window (refer to éa). Mount the window seal to the Velcro strap on the window casement from the middle(Next to the window handle) tothe left and right of to the up and down side.
For outward open window, please stick the window seal onto Velcro strap which has been stuck onto the inside window casement (Refer to 6b). -
Test to close window with window seal
Close window and make sure that the cloth window sealisn’t clamped. -
Pinchairhose
Open window slightly and pinch air hose inthe window seal by using the zipper. -
Fix the air hose with cable tie
Use cable tie to fix the air hose to the zipper ifnecessary.
The installation is completed. And itis ready for use now.
Remark: The cable tie is reusable: youcanpress the trigger to unlock the cable tie if you want to remove it.
Important: If you want to close window after installation the cloth window seal, please untock the cable tie and zippers andremove the air hose. then you can close the window.
For some circumstance, you may need to remove the window seal from the window casement to close the window.
Copyright by HOOMEE. Reproduction is prohibited!