2Boom BT219 15 Inch Led Flame Sound Bar Speaker Instruction Manual
- June 14, 2024
- 2Boom
Table of Contents
15 INCH LED FLAME
SOUNDBAR SPEAKER
Model: BT219
PLEASE READ ALL INSTRUCTIONS CAREFULLY & RETAIN FOR FUTURE USE
Getting Started
Remove the unit from the box. Remove any packaging from the product.
Please retain all packaging until you have checked and counted all the parts
and the contents against the parts list.
Package Contents
- Portable Wireless Speaker
- USB rechargeable cable
- Instruction manual
Features
- Wireless Bluetooth connectivity to iPad, iPod Touch, Android, Windows Phone, Blackberry, smartphones, tablets, computers and more.
- Play music through Bluetooth, TF card, AUX and USB
- FM Radio
- Rechargeable built-in battery
IMPORTANT SAFETY INFORMATION
-
Read all instructions before using this product.
-
Do not leave this product unattended while connected to the power supply.
-
Do not immerse in water or any other liquids.
-
Do not use if unit has been dropped or damaged in any way.
-
Improper repairs may place user at serious risk.
-
Repairs to electrical equipment should only be performed by qualified personnel.
Place unit on sound, even surface, free of vibrations and away from sources of heat. -
Do not put objects into openings.
-
Do not use this unit for anything other than its intended use.
-
Keep this product out of reach of children.
-
This product is not a toy.
Do not play music at excessive levels especially near children, as damage to hearing may occur.
Operation:
| |
---|---|---
1| +| Short press: Next Song
Long Press: Volume increase
2| ****| Short press : Play and pause in BT/USB/TF mode Double press :to
recall in BT mode
Short press : to answer calling during the call ringing Double press: to
reject calling during the call ringing Long press: to searching channel in FM
mode
3| –| Short press: Previous Song Long Press: Volume decrease
4| M| Short Press:Change 7 Light modes and turn ON/OFF light Long Press:
Switch modes between FM/BT/TF/AUX /USB Double press:TWS function
Bluetooth Connection:
Switch speaker to Bluetooth mode. Turn on the Bluetooth on your devices to
add, search or scan for devices, select “2BOOM-BT219”. Enter passcode “0000”
if it asks.
Voice notice appear when connected successfully.
TWS Connection
Connect one speaker with your mobile device via Bluetooth. Once connected one
speaker, double press “M” button on other speaker to active TWS function.
There will be “ BEEP ”sound once both speakers connected successfully.
Double press the “M ” button of any speaker will cancel TWS connecting.
SPECIFICATIONS:
- Bluetooth version: 5.0
- Input voltage: DC 5V
- Power Rating: 5W*2
- Battery: 1500 mAh
- Operation range: 32.8ft
- Frequency response: 80Hz-18KHz
- Charging Time: 3-4 hrs
- Playing Time: 1-2 hrs
FCC ID: 2AIDL-BT219
FCC STATEMRNT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,and
- This device must accept any interference received,including interference that may cause undesired operation.
Warming:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notes :This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications,However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits,The device has been evaluated to meet
general RF exposure requirement.
Migear International Group LLC,
21 W 38th Street, 14th Floor, NY, NY 10018 USA
TEL: 929-390-4504
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>