ThermoPro TP357 Bluetooth Humidity Temperature Monitor Instructions
- June 6, 2024
- ThermoPro
Table of Contents
TP357 Bluetooth Humidity Temperature Monitor
ThermoPro
Bluetooth Thermometer/Hygrometer
Model No. TP-357
According to the operating system of your smartphone,
scan the following QR code to download and install.
Introduction
Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/hygrometer. You will now be able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone.
Usage
Follow the simple steps below to set up your ThermoPro Bluetooth Thermometer/Hygrometer and remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone!
Step 1: Download and install the “ThermoPro Sensor“App.
Scan the QR code above, or search for “ThermoPro Sensor” on the Apple Store
for IOS devices or on the Google Play Store for Android devices. Download the
App and install it on your smartphone.
iPhone and iPad apps for IOS 9.0 and above.
Android app for versions 4.4 and above.
*Android users need to allow all the requests about this app from Android system.
Step 2: Enable Bluetooth on your smartphone under the smartphone Settings section. If your smartphone has Bluetooth enabled, you can skip this step.
Step 3: Insert one AAA battery into the battery compartment on the back of the thermometer in correct polarity (+) and (-) as indicated.
Step 4: The temperature and humidity will be displayed on the screen and the Bluetooth icon will be flashing at the top of the display. The Bluetooth icon will be flashing for 2 minutes which indicates that the thermometer is ready for pairing to your mobile phone.
Step 5: Launch ThermoPro Sensor APP and press to add a thermometer. The thermometers will be shown on a list and select one to pair. Once pairing is complete, the Bluetooth icon on the thermometer display will stop flashing and the current temperature and humidity will show on the APP. If the Bluetooth icon stops flashing and you haven’t finished the pairing, press and hold the ˚F /˚C button on the back of the unit for 2 seconds and the will be flashing again ready for pairing.
Done! Your ThermoPro Bluetooth Thermometer is ready for use!
Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity
Hereby, the manufacturer declares that this product with the basic
requirements and applicable regulations of the Radio Equipment Directive
2014/53/EU, the EMC Directive 2014/30/EU. The complete declaration of
conformity can be found at:
https://itronicsmall.com/eu-declaration-of-conformity/
complies
Disposal of the electronic appliance
This electronic appliance should not be disposed of with normal household waste.
Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt.
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials and workmanship for a period of one year, from date of purchase.
Should any repairs or servicing under this warranty be required, contact
Customer Service by phone or email for instructions on how to pack and ship
the product to ThermoPro.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Customer service
Telephone: 1-877-515-7797 (USA & Canada
only)
Email: service@buythermopro.com
Hours: Weekdays 8:00 AM- 8:00 PM EST(USA & Canada only)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>