Russell Hobbs 20630 Steam Iron Help User Guide
- June 14, 2024
- Russell Hobbs
Table of Contents
Russell Hobbs 20630 Steam Iron Help
To get the most from your product and to avoid damaging it please read the instruction manual. Here are some key points. Do not use descaler or scented water in any iron. It damages the steam-generating material and may cause a brown discharge from the soleplate. You may use the iron with tap-water, but if you live in a hard water area, you should use distilled water (not chemically descaled or softened water). If you buy distilled water, check that it’s suitable for use in irons.
- Check for textile care symbols
- Iron fabrics need low temperatures first , then those that need medium
- temperatures , and finish with those needing high temperatures .
If the instructions on the fabric label differ from this guide, follow the instructions on the label.
STEAM IRONING
- If you intend to use steam, the temperature setting must be off or higher.
- Set the steam control to the setting you want ( no steam, high).
- Wait till the light goes off, then start ironing.
SELF-CLEAN
To avoid scale build-up, use the self-clean function at least monthly in normal water areas, more often in hard water areas. You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
- Fill the reservoir to the max mark.
- Set the temperature control to max, and set the steam control to S.
- Set the iron on its heel.
- Put the plug into the power socket and wait till the light goes out.
- Hold the iron over the basin or bowl, with the soleplate down.
- Press the C and hold it down.
- Gently move the iron to and fro, over the basin or bowl.
- Water and steam will wash the scale and dust through the soleplate.
- When the reservoir is empty, release the C button.
- Unplug the iron, and sit it on its heel
