PHILIPS BGP472 LED180 NW 150W G2 F LineBase User Manual
- June 16, 2024
- Philips
Table of Contents
Lighting
LineBase
BGP472 LED180 NW 150W G2 F
LineBase, 19190 lm, 150 W, 740 neutral white, Analog, Safety class I
LineBase is breakthrough lighting for the city tunnel, underpass. It’s a
really and amazingly linear lighting yet easy to install, and it’s the ideal
solution to replace fluorescent lighting. The customized lumen output of
LineBase enables lighting designers to have freedom on lighting layout. Its
continous installalation is to create a seamless, brighter, comfortable visual
effect with less flicker. Its plug-and-play electrical connection and remote
waterproof drivers save total cost of owner. The products pass kinds of safety
and durability test to prove a long lifespan on its operation.
Warnings and Safety
• Strongly recommended to use surge protection device in electricity cabinet to wire luminaires
Product data
General Information
Driver included| Yes
CE mark| –
Flammability mark| –
Light Technical
Luminous Flux| 19,190 lm
Correlated Color Temperature (Nom)| 4000 K
Luminous Efficacy (rated) (Nom)| 120 lm/W
Color rendering index (CRI)| >70
Light source color| 740 neutral white
Optical cover type| Polycarbonate Diffuser
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 or 60 Hz
Inrush current| 44 A
Power Consumption| 150 W
Power Factor (Fraction)| 0.9
Connection| Connection unit 2-pole
Cable| Cable 0.3 m with connector 2-pole
LineBase
Temperature
Ambient temperature range| -40 to +50 °C
Controls and Dimming
Dimmable| Yes
Control interface| Analog
Mechanical and Housing
Housing Material| Aluminum Alloy
Optical cover material| Polycarbonate
Housing Color| Aluminum
Overall length| 1,185 mm
Overall width| 120 mm
Overall height| 88 mm
Effective projected area| 0.064 m²
Dimensions (Height x Width x Depth)| 88 x 120 x 1185 mm
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jet- roof]
Mech. impact protection code| IK05 [0.7 J]
Protection class IEC| Safety class I
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-10%
Initial chromaticity| (0.3831,0.3798) 5
Power consumption tolerance| +/-10%
Product Data
Order product name| BGP472 LED180 NW 150W G2 F
Full product name| BGP472 LED180 NW 150W G2 F
Order code| 9.11402E+11
Material Nr. (12NC)| 9.11402E+11
Numerator – Quantity Per Pack| 1
Numerator – Packs per outer box| 2
Dimensional drawing
©
2023 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2023, November 22 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>