HUPEJOS V80-4CH 360 Degree 4K Dash Cam Instruction Manual
- June 14, 2024
- HUPEJOS
Table of Contents
- Parking Mode (Optional)
- INSTALLATION NOTES
- PARTICULAR WRONG CONNECTION
- FAQ
- Mobile Phone Connection App
- WIFI Connection
- App Connection
- App Operation
- App GPS Video Playback
- PC GPS Video Playback GPS Function
- Install GX Player
- Use GX player
- Specification
- Warm Tips
- Maintenance
- Troubleshooting
- After Sales Service Support
- THANK YOU FOR CHOOSING HUPEJOS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUPEJOS V80-4CH 360 Degree 4K Dash Cam
Parking Mode (Optional)
PREPARE YOUR HARDWIRE KIT
Hardwire Kit is needed only when using Parking Mode.
If Parking Mode is desired, contact to purchase.
GETTING TO KNOW YOUR HARDWIRE KIT
Features:
-
Low Battery Voltage Protection
-
Multi Input Power
-
Universal Compatibility
-
Length: 11.5ft
WARNING : Wrong connection may disable Voltage Protection and damage your car.
INSTALL YOU HARDWIRE KIT
Red wire >ACC > Power only when car key is on
Yellow wire >B+ > Always has power
Black wire > Ground > Any grounded(neg) screw
POP-UP : Fuse box panel is typically located driver side dash board. You could cut the head of wires and connect it to your fuse directly if fuses is small.
INSTALLATION NOTES
Connection| Driving| Parking|
---|---|---|---
| ON| Parking Mode|
√
| OFF| OFF|
☓
| ON| OFF|
☓
| OFF| OFF|
☓
| OFF| ON|
☓
| ON| OFF|
☓
PARTICULAR WRONG CONNECTION
Connection | Driving | Parking |
---|---|---|
ON | Always On |
The camera will run Parking Mode constantly, and your car battery will be drained under this connection
Please check if your camera working after 15mins your car is off (Because some cars have a delayed power off function, 15 minutes later you can ensure that the ACC interface has been powered off)
Please check if your camera working after 15mins your car is off (Because some cars have a delayed power-off function, 15 minutes later you can ensure that the ACC interface has been powered off)
FAQ
Q1:After installing the hardwire kit, it can enter the parking monitoring mode, but it cannot be turned on with the car starting, and the dash cam needs to be turned on manually, why?
A1: Because your hardwire kit's yellow wire is connected to the wrong place.
Q2: l have installed the hardwire kit, but the dash cam still prompts that the parking monitoring mode cannot be entered, why?
A2: The first reason is that your red and yellow wires are wired incorrectly. The second reason is that the red wire of the hardwire kit is broken and there is no power
Mobile Phone Connection App
- Download APP
APP Name: TsCam
Please scan the QR code for the relevant version below to download the app and install it.
①Search for the “Tscam” app in App Store/GooglePlay Store
②Search for “Tscam” in Google Play Store to find the app and then download and install it on your phone.
③Search for the “Tscam” app in Amazon App Store
④Other APP name: Tscams/Roadcam If the “TsCam”APP cannot be downloaded, download other apps to use, scan the following picture QR code to download and use
Sometimes TsCam APP will be updated, if you can not download the “TsCam” APP,
please contact us in time for after-sales support!
NOTE : The WiFi range of V80 is 6~7 meters from the dash cam. V80 Dash
Cam is NOT a cloud dash cam, and you can’t view your videos remotely away from
more than 6~7 meters from your car. To utilize the WiFi feature, you must stay
within the 6~7 meters range from your HUPEJOS V80 Dash Cam. Like your home
WiFi, you don’t get a WiFi signal outside your home, the same way the WiFi
range for this tiny device is 6~7 meters.
Live View – Watch your dashcam’s live video feed in about 10fts.
Video playback – Watch recorded videos stored on your dashcam on your
smartphone. (The video and picture pixels of TsCam APP are compressed. So if
you need to view clearer information, such as the license plate number, the
picture or video can be downloaded through the app and played back online, or
use the SD card to view it on your computer.)
WIFI Connection
When WIFI is turned on, the display screen will display ID and ID password
- Not enabled
- Enabled
- Connected
- Please make sure the WiFi function on the machine is on
- Open the phone WiFi settings list, select the WiFi name (SSID: HUPEJOS-V8-***) on the machine, and enter the password (PWD: 12345678) to connect
- Open ”TsCam“APP, click the “Connect” button and connect to use.
NOTE : Before connecting WiFi, please make sure the WiFi function of your
smartphone is enabled.
If you forget the WiFi password, you can restore the default setting of the
device, and the Wi-Fi password of the device will also be restored to the
default password(12345678)
App Connection
After the WiFi connection is successful, click “connect” when opening the app,
and then the app will automatically connect to the camera and display the
current real-time recording the situation of the camera.
App Operation
After entering the App’s real-time preview, you can perform the following
operations:
Video preview : After the app is successfully connected to the camera,
enter the real-time preview page, click the full-screen icon or place the
phone horizontally, and the real-time screen will automatically switch to the
full-screen preview mode. Click the window switch icon to switch the front
rear and cabin video windows, but only multi-channel dash cams can use this
feature.
Video playback : The video and photo files recorded on the SD card can be
viewed in the app, and the video can be played back after clicking the file.
Video download : You can select the video or picture you want to download
in the SD card browsing interface or in the video playback area. After
downloading the video, if you play it in the local file of the app interface.
App GPS Video Playback
①Open the APP and download the video to the local album.
②Select Native Album and Looping Video.
③Click Play video to view the track of the video.
Note : Android system must close the Wi-Fi connection between the phone
and the local machine to see the playing tracks on the APP, otherwise, the
phone can’t access the Internet. iOS system doesn’t need to.
PC GPS Video Playback GPS Function
① Video interface indicates that the GPS is not positioned, Flashing status
means the GPS positioning is successful No flashing.
② The system time will be synchronized after successful positioning (according
to the time zone time set in the menu)
③ In the “GPS status” of the general settings, you can view the real-time GPS
CN value
Install GX Player
- MAC system computer: Search “GXPlayer” on the application market of Apple computer to install it.
- Windows system computer: the installation method is as follows.
Windows systems, you can automatically generate the GXPlayer installation file from the memory card used in V8 Dash Cam, find GXplayer in the file, and click download, and install GXplayer player to use.
Installing a GPS Player
Open after the installation is complete
Use GX player
Import the video file after GPS positioning(Figure1, number 1); Show track of
travel(Figure1, number 2);
Show the position in the process of driving(Figure1, number 3) The real-time
speed(Figure1, number 4)
General Settings(Figure1, number 5. The Figure 2 menu Settings feature will
appear)
Specification
NO. name | Description |
---|---|
Resolution Video resolution | Front:4K 3840X2160/3K 3200X1800/2K 2560X1440 |
Left/Right:1920X1080, Rear camera:1920X1080
Audio and video formats| H.265 format
File format Image| Image: JPEG Video: mp4
Seamless Video| Support
Power failure file recovery function| Support
Year/month/day/ hour| Support
SD Card| Supports up to 256G Note: The SD card must be formatted on the
machine before it can be used for the first time.
Multi-language support| English
WIFI APP| Support
Lens| 6G F/NO 1.8
DDR| DDR3 4G
Battery| None
Display resolution| 854*480
SENSOR| 4 megapixels
Lens angle| 150 degrees
Speaker specifications| 8R 1.5W
G-SENSOR| Three-axis gravity sensor
IR infrared fill light| 8pcs 940
Operating voltage| 5V 2.5A
Static current| 20uA
Operating temperature| -30 degrees +60 degrees
Warm Tips
- The dash cam supports standard Micro SD cards.
- Please use memory cards with the 32G(MINIMUM)-256G (MAXIMUM) of Class 10, U3(UHS-1) Speed or above. We recommend using Class 10, U3 of SAMSUNG or LEXAR High Endurance Micro SD cards.
- When you insert a new card into the machine, please format the card on the Dash Cam before you use it. You can find the Format option on the menu of Dash Cam.
- On the 1st and 15th of every month, after the machine is started up, there will be a prompt for formatting. This is just a prompt, and it doesn’t matter if the user does not format it. Please don’t worry about the machine formatting automatically.
- Temperature protection: In the case of abnormal high temperature, it will automatically turn off WiFi and automatically turn off the device
- Automatic resolution switching function: when the rear camera is not connected, the front resolution will automatically switch to 4K, and when the rear camera is connected, the front resolution will be 2K or 3K
- WiFi is turned off by default every time you turn it on. When you need to use it, please press and hold the OK button to turn it on or enter the settings to turn on the WiFi function
- The memory card may become damaged or deteriorated after repeated cycles of overwriting, and this may affect its ability to save video and image files after repeated cycles of overwriting, and this may affect its ability to save video and image files.
Maintenance
MAINTAIN YOUR CAMERA
Do not directly plug and unplug the cable or MicroSD card, except when the
camera it turned off.
We do not encourage you connection your camera with other hardwire kit, but if
you insist to do this, please have a look of those lower than 6V and higher
than 2.5A.
It is normal for the camera to be warm during operation. Excess exposure to
heat from the sun may cause damage that isn’t covered under the 1 year
warranty.
Troubleshooting
WIFI CONNECTION GOES WRONNG
Connection Prepare
Mobile data/VPN is off
16 ft less close to your V80
Only allowed 1 device connection
Connection Notice
WiFi password: 12345678
Won’t enter Parking Mode
Hardwire kit needed
The screen prompts “ACC disconnected” when trying to enter Parking Mode
Blue light on + Red light flash
Camera always on after Car turned down
Wrong connection of Red wire and Yellow wire
Please connect red wire with ignition fuse
Over Heat
Camera should stay between -22°F-144°
FRECEIVED DEAD CAMERA?
Use USB cable to connect your camera with computer and check if the screen turn on
lf not, please unplug MicroSD card and use a pin and press the Reset button at the bottom of camera
Reconnect your camera and press
ULTIMATE SOLUTION
Make sure you are using the original car charger that comes with the package. If not, please replace.
Remove the rear camera, MicroSD card, and then put them back into the dash cam in sequence. Check whether the short circuit of the accessories causes the dash cam to fail to work normally.
Check your MicroSD card is U3 Class10, if not, please change to one that is U3 Class10.
lf not, please use your personal USB charge and check again.- Check if the car charger is short-circuited and the dash cam can not work normally.
Please download our latest firmware to upgrade your dash cam.
lf the methods above don’t solve your problem, feel free to contact HUPEJOS and please leave your contact information and current address which may be needed if a replacement is warranted. This solution could be dealing with multiple problems > Won’t turn on > Restart itself > MicroSD card error
Can’t auto recover >Can’t playback
After Sales Service Support
Warranty :
The HUPEJOS Dash Cam comes with a full 12-month warranty. you can extend the
warranty to 18 months.
Support :
If you have any questions regarding your product, please do not hesitate to
contact us via Amazon or drop us an email at
HUPEJOS@gmail.com. These are typically answered
within 12-24 hours.
Your opinion matters :
HUPEJOS is firmly committed to always improving our products and services. and
user experience. if you have any thoughts on how we can do even better, we
welcome your constructive feedback and suggestions.
THANK YOU FOR CHOOSING HUPEJOS
About HUPEJOS Dash Cam
We are a well-established manufacturer that specializes in providing smart car
electronics & visual perceptual solutions for car lovers.
As a Dash Cam supplier, we are passionate about what we do.
Every customer is important and unique – and we know they always expect the
best from us. Providing our customers with a satisfying shopping experience
includes not only offering the best prices with a guarantee, but also a
wonderful warranty and the highest level of pre and post-sales customer
service.
Email Service:
hupejos@gmail.com
Email our customer service and we will answer any of your questions/concerns.
We offer 7*24 hours of technical support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>