RSSLO 5081 Rail Bus Instruction Manual

June 16, 2024
RSSLO

Train Simulator Classic
ÖBB 5081
SchienenbusRSSLO 5081 Rail Bus

Rolling stock

RSSLO 5081 Rail Bus - Rolling stock 1.1. ÖBB 5081
Model name in Train simulator is: ÖBB 5081

Cab controls

RSSLO 5081 Rail Bus - Cab controls

2.1. Picture 1
Reverser – motor selector (1)
Throttle lever (2)
Gear lever (3)
Handbrake (4)
Train brake (5)
Wipers (6) RSSLO 5081 Rail Bus - Desk2.2. Picture 2: Desk
Starter (1)
Passenger light (2)
Motor emergency turn off (3)
Magnetic brake (4)
Sander (5)
Horn (6)
SIFA on/off (7)
Instrument light (8)
Motor on (9)
Motor off (10)
Wipers (momentary) (11)
High beam light (12)
Light – Right (13)
Light – Middle (14)
Light – Left (15)

2.3. Start-up procedure

1. Switch on the battery – “Shift+B”
2. Insert the reverser lever
3. With the reverser lever select the first motor I1 – “W”
4. Push starter button down
5. Push motor on button – the first motor must turn on
6. With the reverser lever select the second motor I2 – “W”
7. Push starter button down| 8. Push motor on button – the second motor must turn on
9. With the reverser lever select both motors I1 + I2 – “W”
10. Insert the gear lever
11. Insert the train brake lever
12. Turn on the lights
13. The ÖBB 5081 is now ready
---|---

2.4. Change cab procedure
When you want to change the cab, you must take the reverser, gear and train brake lever with you to the cab on the other side.

1. Put the reverser in the neutral position
2. Take out the reverser lever
3. Put the gear lever on the “0” gear
4. Take out the gear lever
5. Put the train brake lever in the neutral position
6. Take out the train brake lever| 7. Turn off the lights
8. Change the cab (use the right arrow key on the keyboard)
9. Insert the reverser lever and select both motor I1 + I2 in the direction you want to drive
10. Insert the gear lever
11. Insert the train brake lever
12. Turn on the lights
---|---

2.5. Gear lever
The ÖBB 5081 has six gears and between the gears is always the neutral gear.
2.6. Magnetic brake
The magnetic brake has two positions “Full” and “Half” and when you want to use it put the magnetic brake switch in the position you want. The magnetic brake will be automatically on if you put the train brake lever into the emergency position.
2.7. SIFA
You must confirm SIFA within 30 seconds from your last confirm. If it was not confirmed in 30 seconds then the emergency brake will be applied. Before the emergency brake will be applied the warning voice will turn on.
If the emergency brake is applied, then you must put the brake lever into the emergency position and press the SIFA button again.

Keyboard

Function Key
Increase / decrease Throttle A / D
Increase / decrease Gear O / P
Increase / decrease Reverser W / S
Increase / decrease Train Brake ‘’ /  ;
Increase / decrease Magnetic brake [ / ]
Battery switch SHIFT+B
Horn 1 B
Horn 2 Space
Confirm SIFA Q
SIFA activated / deactivated SHIFT + NUM ENTER
Headlights H (SHIFT + H)
Wipers V (SHIFT + V)
Sander X
Passenger light L
Instrument light I

Scenarios

4.1. Panoramic drive

  1. Rating: ***
  2. Duration: 30 min
  3. Scenario type: Career scenario
  4. Route: Drautalbahn

4.2. The old school vehicle

  1. Rating: **
  2. Duration: 25 min
  3. Scenario type: Career scenario
  4. Route: Drautalbahn

4.3. Train preparation

  1. Rating: **
  2. Duration: 8 min
  3. Scenario type: Career scenario
  4. Route: Drautalbahn

© Copyright 2023 Fastmake d.o.o., all rights reserved
Version 1.0

Documents / Resources

| RSSLO 5081 Rail Bus [pdf] Instruction Manual
5081, 5081 Rail Bus, Rail Bus, Bus
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals