HUPEJOS V80-4CH 360° 4K Dash Cam 4 Channel Camera User Manual
- June 14, 2024
- HUPEJOS
Table of Contents
V80-4CH 360° 4K Dash Cam 4 Channel Camera
Product Information:
The product is a dash camera with the model number 5VSO0O4DSFFO
-PDLUIF7JEFP 5VSO04DSFFO 5BLF1IPUP 7JEFP4UBSU 7JEFP4UPQ
4IPX’SPOU$BNFSB 4IPX3FBS$BNFSB 4IPX#PUI$BNFSB 5VSO0OVEJP 5VSO0VEJP
5VSO0O8J’J 5VSO08J’J. It is designed to be used inside a vehicle
and is intended for recording videos and images while driving.
Product Usage Instructions:
-
Before using the camera, read the instruction manual carefully.
It contains important information for your safety as well as
operating and maintenance instructions. -
Follow all safety precautions to prevent damage due to improper
use of the camera. -
Do not install the dash camera in a position that obstructs or
reduces a driver’s view. Ensure your usage complies with the
relevant vehicle codes of your state, province, territory, or
country. -
Avoid extended exposure of the dash cam to direct sunlight or
extreme temperatures, as it may degrade or damage the unit and its
functionality. -
Regularly examine, check, and verify the dash cam, including
the memory card, every 6 months to ensure proper video reception
and recording. Before each use, verify that the dash cam unit,
visible lights, and audible sounds are working normally. -
Do not attempt to open the cover or repair the dash cam
yourself. Contact the seller for assistance if there are any
problems with the accessories. -
When cleaning the lens surface, use a soft, moist cloth to
avoid compromising video quality. -
Use the dash cam unit as intended and avoid using it in a way
that would be illegal, physically damage the unit, or pose a danger
to the safe operation of the vehicle or its occupants. -
The device is intended for use inside the vehicle only.
-
Avoid exposing the product to rain, moisture, or water under
any circumstances, as it may result in external or internal
damage. -
Do not operate or install the camera while driving or attempt
to change any settings. Doing so may void the warranty. -
Before installation, check the accessories carefully to ensure
that the product and accessories are correct and complete. -
To ensure proper functioning, format the micro SD card before
use. -
During installation, do not insert the car key into the power
supply or insert/remove any machine accessories like the micro SD
card or rear camera while the dash cam is powered on. Complete
these actions when the power is turned off. -
When the car key is plugged into the vehicle, the dash cam will
automatically turn on. Check if the power on/off function and the
camera’s display are normal. -
If you need to download recording videos and images, turn off
the camera before removing the micro SD card. -
Use a U3 high-speed card with a recommended capacity of
8GB-256GB. Using a lower speed card may cause problems like video
stutter, black screen, or inability to record/play videos. -
If you are unable to connect the TsCam APP to preview on
certain mobile phone models, try turning on the airplane mode of
the mobile phone.
a®}
®§§q¨
5VSO0O4DSFFO -PDLUIF7JEFP 5VSO04DSFFO 5BLF1IPUP 7JEFP4UBSU 7JEFP4UPQ
4IPX’SPOU$BNFSB 4IPX3FBS$BNFSB 4IPX#PUI$BNFSB 5VSO0O”VEJP 5VSO0″VEJP
5VSO0O8J’J 5VSO08J’J
THANK YOU FOR CHOOSING HUPEJOS® After-Sales Services:hupejos@gmail.com
H U P E J O S ® a
N$
6
S1=
X¿»§¨» ÅŨNÅq»Å
bqÅ¿¨Å|®Ù G»®Ê}Å=Ó»ÓÔ =¸»qÅ®¨q¨NÅŨ¿ $®ÔÅ®¨¿Åq¢¢Å§q¨|®Ú $®ÔÅ®¨¿Åq¢¢Å¨}q»»q»}q§
NÅŨX¸h®Ê»
q§»q Gq» ¨6®=¸Å®¨q¢ 6®|¢¸®¨}®¨¨}Å®¨GG GG GNÓ®¸¢qÚ|q} N¸}è}qÅ®¨¿ bq»§S¸¿
X¿»§¨»
1.Please read this instruction manual carefully before
using the camera.lt contains important information for
your safety as well as operating andmaintenance instruc-
tions.
2.Follow all safety precautions in order to prevent
damage due to improperuse of the camera.
3.You should not install this dash camera at a place that
would obstruct orreduce a driver’s view.Make sure your
usage complies with pertinentvehicle codes of your state,
province, territory or country.
4.You should avoid extended exposure of the dash cam
to direct sunlightor extreme temperatures (either high or
low temperature) which tend todegrade or damage the
unit and its normal functionality.
5.You should examine, check and verify the dash cam at least every 6months,
including the memory card, to ensure the video reception andrecording are
working properly. For each use, you should verify that thedash cam unit, the
visible lights and the audible sounds are working normally. 6.Do not try to
open the cover or try to repair it yourself. If the accessoriesfor this device
have any problem, please contact the seller for assistance.
7.Pay careful attention when cleaning the lens surface.Use a soft, moist cloth
to clean the lens to avoid compromising video quality.
8.You should use the dash cam unit in the way it is intended.You use the dash
cam unit in a way that would be illegal or that tends to physically damage the
unit, or tend to cause danger to the safe operation ofthe vehicle or the
occupants.
9.This device is intended to be used inside the vehicle only.
‘ 10.Do not exposethis productto rain, moisture orwater
under anycircumstances or it will result in external or internal damage. 11.Do
not operate or install the camera while driving, or attemptto changeany
setting etc. 12.If any damage is caused by failure to followthe instructions,
the warrantywill be voided.
ÅŨNÅq»Å
Before installation, please check the accessories carefully to ensure that
theproduct and accessories are correct and complete.
In order to ensure that the device is running well, please format the micro SD
card first before use.
During installation, be sure not to insert the car key into the power supply,
and donot insert or remove any machine accessories like microSD card or rear
camera when the dash cam is powered on. These actions should be completed when
power is turned off.
When the car key is plugged into the vehicle, the dash cam will automatically
turn on. Please check whether the function of power on/off, the cameras
display is normal.
If you need to download the recording videos and images, please turn off the
camera first before removing the microSD card.
You must use U3 high-speed card (recommended capacity 8GB-256GB),lower than U3
will cause problems like video stutter, black screen, and video cannot be
recorded or cannot be played.
For some mobile phone models, if find that the TsCam APP cannot be connected
to the preview, please turn on the airplane mode of the mobile phone and try.
bqÅ¿¨Å|®Ù
G»®Ê}Å=Ó»ÓÔ
1.HUPEJOS V80 Dash Cam
2.Rear camera with cable
3.Suction Cup Mount
4.Car Charger with Type C USB Cable
5.Car Wiring Tool
6.User Manual
7.Electrostatic Film for 3M Mount
8.128GB SD Memory card
9.3M Adhesive Mounts
3FTFUQPSU 5’DBSETMPU #SBDLFU 3JHIUDBNFSBJOTJEFUIFDBS -FGUDBNFSBJOTJEFUIFDBS 8PSLJOHJOEJDBUPSMJHIU 6QCVUUPO %PXOCVUUPO
3FBSDBNFSBJOUFSGBDF 5ZQF$QPXFSQPSU *3MBNQ ‘SPOUDBNFSB %JTQMBZ .FOVCVUUPO 1PXFSCVUUPO 0,CVUUPO
=¸»qÅ®¨ NÅŨ¿
Menu button
1.When the recording is stopped, short press to enter the menu
2.Long press to switch between recording mode/playback mode
Recording mode
Short press to lock the video Long press to switch the recording function
Up button
Setup mode
Short press to Select the previous function
Playback mode
Short press to Select the previous file
Power button
Recording mode
Setup mode
Playback mode
Recording mode
‘ Short press to Switch screen
Long press for 2 seconds to power off
Short press to Return to the previous screen
Short press to Return to the previous screen
Long press to Take a snapshot Short press to Switch the screen
Down button
Setup mode
Short press to Select the next function
Playback mode
Short press to Select the next file.
Recording mode
Short press to start or stop recording Long press to turn on or off the WiFi
Ok button
Setup mode
Short press to confirm
Playback mode
Short press to confirm
Working indicator light Blue indicator light
1When recording, the blue light flashes
2Stop recording, the blue light is always on
&¨¿»Åŧ§®»Ú}q»
Push the TF memory card straight into the slot in the direc-tion of the screen
print until you hear a “click” sound. Remove the card: Push the TF memory card
forward, and thecard will be removed when it is ejected. Note: Removing the TF
card in the video state may reduce the file and damage the life of the TF
card,pleaseturn off the dashcam first before inserting and removingthe TF card
N}q»»}®»è¢¿q» ¿}»|
SD Card name:Storage file Event: Store video files that are locked in an
emergency or manually Normal: Store of conventional driving video files Photo:
Store snapshots Parking: Store video files recorded by parking surveillance
cameras Share: For the reserved function, no files are stored
Secondary folder A/B/C/D A: Store video/pictures of front shots B: Store
video/pictures of left shots C: Store video/pictures of right shots D:Store
the video/picture of the rear shot
aG®Ô»S®®¢¿
1.Cig Charger
Note: It is best to use the power cord that comes with our products, or our
professional hardwire kit.
2.Hardwire Kit with radar
(Required for Parking Mode. Prevents car battery drain)(Not included,
purchased separately)
$®ÔÅ®¨¿Åq¢¢Å §q¨|®Ú
Start the vehicle generator, and do a bench test before officially- installing the dash cam: connect the car charger to the Cigarette lighter port and the dash cam, connect the rear camera, and insert the MicroSD card to ensure that the dash cam can work normally.
Find the right spot on the front windshield. Wipe the pre-installed location with a clean cloth.
Use the crowbar to run the power cable along the front windshield and the roof, and hide the cable on the A-pillar, so as not to block the driver’s sight and cause danger.
Use a clean cloth to wipe the rear windshield where the rear camera needs to be installed.
Then peel off the electrostatic sticker from the cellophane, and transfer it to the place you want to stick it.
$®ÔÅ®¨¿Åq¢¢Å¨}q» »q»}q§
NOTE: This rear camera is a special rear camera in the car, the effect is
better if it is installed in the car and it is not waterproof. We recommend
that you install it on the rear windshield of your car
Eliminate the air bubbles on the static stickers. It is recommended-to install the back camera after standing still for half an hour to make the static stickers stronger
Insert the power cord along the gaps between the front windshield and the ceiling, between the car body and the ceiling on the side of the passenger seat, between the rear seats and the ceiling.
NÅŨX¸h®Ê»
q§»q
With your camera off, insert the card into the card slot with the labelfacing the back of your camera. You can eject the card by pressing it into the slot with your fingernail.
Push the TF memory card straight into the slot in the direction of the screen
print until you hear a “click” sound. Remove the card: Push the TF memory card
forward, and the card will be removed when it is ejected. Note: Removing the
TF card in the video state may reduce the file and damage the life of the TF
card, please turn off the dashcam first before inserting and removing the TF
card
G®Ô»¨®¨
With your camera off, insert the card into the card slot with the label facing
the back of your camera. You can eject the card by pressing it into the slot
with your finger-nail. Short press button to turn on your V80
G®Ô»¨®
Press and hold button for 3 seconds to turn it of.
Function display of dash cam display Main Interface
In video recording mode, short press the menu button to enter the main interface
Dash Cam:Driving recorder mode
Playback:Playback video or picture mode
Voice ControlVoice control function setting
Dashboard: Dashboard driving mode
Settings:System settings
q¿
q§
Number: Function description of the video recording interface
1
It disappears automatically when you stop recording.
When the rear camera is not connected, the resolution of the front channel is
4K; when the rear camera is connected,
2 Recording the resolution of the front channel is 3K or 2K
function Front: 4K 3840X2160/3K 3200X1800/2K 2560X1440 Left: 1920X1080 Right:
1920X1080 Rear: 1920X1080
3 Recording
function
4 GPS
Indicates that the sound recording function is enabled
Indicates that the sound recording function is disabled
Indicates that the GPS is not located Indicates that the GPS location is
complete
5
Indicates that the recorded video is protected by a
lock.
6 WiFi :
Indicates that Wi-Fi is not enabled Indicates that WI-FI is enabled Indicates that Wi-Fi is not enabled
7
SSID and Wi-Fi password
8
The current system time
9
After successful GPS positioning, the current vehicle speed will be displayed in real-time
10
After successful GPS positioning, it will display the
current vehicle driving direction in real time
11
Front Video
12
Rear camera Video
13
Left Video
14
Right Video
Playback Playback operations and settings Button operation during playback
Playback settings
Playback file preview screen – icon status. Video/picture switching button:
Long press the menu button to switch from video file preview to picture file
preview
Menu: Press and hold the menu to enter the playback menu mode
Previous page: Short press the up button to view the previous video/picture.
Next page: Short press the down button to view the next video/picture.
Exit playback mode: Short press the power button or long press the menu button
twice to return to video recording mode
Volume:0~ 100 [Default value: 50]
Video type: Normal/Parking mode/Emergency
Camera: A/B/C/D
Delete: Delete one or all of them
Protect: Protects selected files/deprotects selected files/Protects all files/deprotects all files
Voice Control
Press the OK button to turn on or off the voice control function
Indicates that voice control is off Indicates that voice control is on After
pressing the OK button to turn on the voice control, the voice command
instructions will pop up, press any button to return to the main interface,
say the following voice control commands to the machine, and the machine will
respond with corresponding functions. Voice commands only support English
wake-up, other languages are invalid.
q¿|®q»
‘ q¿|®q»»Ó¨
§®
Driving safety tips: when driving speed exceeds 50mph or 80km/h speed will
become red font tips driving safety. Special attention to tips GPS positioning
is not successful, the GPS icon flashing state, and the dashboard speed and
direction is not functional. For example, if there is no GPS signal in the
underground garage or the machine is working outdoors for the first time, the
dashboard speed and bearing will not be functional within 2 minutes. Dashboard
speed and bearing functions are functional only after successful GPS
positioning.
Settings:
Wi-Fi: ON/OFF(default)Wi-Fifrequency:2.4G/5G(default) Note:lf your phone does
not support 5G,switch to the 2.4G option.
Movie Mode: 3K+1080Px3(default)/2K+1080Px3
IR Led: On/Off / Auto (Default) Note: When the scene is dark, it automatically
opens, and when the scene is bright,it closes.
G-sensor: sensitivity setting, OFF/high/medium low (default) Parking:When
parking, if there is a collision when opening, the dashcam will automatically
start recording for 60 seconds and then close it.High/medium/low sensitivity
can beset
Screen Saver:Off (default) You can set 1 minute to automatically close the
screen and 3 minutes to automatically close the screen Clock Settings: Set the
date and time (theregional time will be automatically updated during GPS
positioning) Format card: select whether to format the memory and(Format the
memory card before using the dash cam) Reset Select: whether to restore
factory Settings
GPS Status: GPS satellite CN value real-time screen Speed Adjust
+5mph(Default)and you can choose from +12 to- 12 Note:When the speed displayed
by the dash cam deviates from the actual. it can be adjusted. Speed unit:
off/km/h/mph(default value) Time zone selection:default- 5:00 Warm tip:can be
set according to the local time zone used by the user Daylight
Saving:On/Off(Default)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>