INKBIRD IBS-P01B Bluetooth Pool Thermometer User Manual
- June 6, 2024
- INKBIRD
Table of Contents
| IBS-P01 Pool Thermometer | + | IBS-P01B Bluetooth Pool Thermometer |
|---|
Introductio Parameters
- Battery: 2*AAA 1.5V Battery(not included)
- Temperature Measurement Range: -40℃~70℃ /-40℉~158℉
- Temperature Measurement Accuracy: ±1℃/±1.8℉
- Temperature Display Accuracy: 0.1℃/±0.1℉
- Waterproof Level: IPX7
- Temperature Sampling Period: 10 seconds
- Warranty: 1 year
Basic Operation
3.1 Buttons
Twist off the lid of the thermometer as shown below, all the buttons of the
thermometer are designed inside.
℃/℉ : Press the button to switch the temperature unit between ℃ and ℉.
CLEAR: Press the button to clear the history temperature data, the device
will record the new maximum and minimum temperature after clearing the history
data. Hold the button for 5 seconds to switch the maximum&minimum temperature
recording time interval between ALL-TIME and 24 hours.
3.2 Battery Installation
-
Unscrew the lid of the thermometer as shown below.
-
Remove the battery cover, install 2 AAA batteries, put the cover back.
-
Make sure the silicone waterproof ring is well placed, then close and tighten the lid of the thermometer.
App Control (IBS-P01B Only)
4.1 Download the app
| |
---|---|---
http://play.google.com/store/apps/details?id=com.inkbird.engbird|
https://apps.apple.com/us/app/engbird/id1282420032
Search “Songbird” in App Store or Google Play to download it for free, or you
can scan the QR code above to install it directly. Note: Please make sure your
phone supports
Bluetooth.
4.2 Open the app, turn on Bluetooth.
4.3 Put the device close to your phone and click “Add Sensor” or “+” to add devices.
4.4 Choose a usage scenario and click “Done” to complete the connection.
4.5 The main interface of the app.
Note: A mobile phone can be connected to multiple sensors at the same time and a sensor can be connected to multiple phones as well.
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
INKBIRD TECH.C.L
Support@inkbird.com
www.inkbird.com
+86-0755-22747857
4/F E, Bldg 713, Pengji Industrial Zone,
Liantang St, Luohu Dist., Shenzhen, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>