Syntech M200 Directional Shotgun Microphone User Manual
- June 14, 2024
- Syntech
Table of Contents
Directional Shotgun Microphone
User Manual
M200 Directional Shotgun Microphone
Who We Are
Sentech was founded in 2017 with a mission to transform the way users interact
with the digital world. Our goal is to improve the user experience by creating
aesthetically pleasing and highly functional products that offer an immersive
experience. We place high importance on creativity, innovation, teamwork, and
on our customers’ demands.
Customer Service
Thank you for your purchase and we hope you LOVE your new product!
For more product info, please visit amazon product page to find or search in
“Have a question” section.
If you have any problems during use or receive a defective product, please do
not hesitate to contact us by clicking
“Your Orders” on amazon the then click View more details” or by email:
[email protected] We would like to
provide help without any hassle and a satisfactory solution for you. Warranty:
12-month warranty
Specifications
Brand: Syntech
Model: M200
Material: Aluminum Alloy
Transducer: Electret Condenser
Polar Pattern: Cardioid
Plug: 3.5mm TRS and TRRS Connector
Frequency Response: 20Hz-20kHz
SNR: > 78dB
Sensitivity: -40dB±3dB(0dB= 1/Pa,at 1KHz)
Output Impedance: 2.2k0
Dimensions: p2182mm
Net Weight: 40g
Product Structure
1 Microphone
3 Foam Windscreen
5 Universal Phone Clip
7 35mm TRRS Connector| 2 Furry Windscreen
4 Shock Mount
6 3.5mm TRS Connector
8 3.5mm Audio Jack
---|---
Notes on Using:
3.5mm TRS Connector
-For cameras, camcorders, audio recorders and other audio/video recording devices.
35mm TRRS Connector
-For Smartphone, tablet or Mac. 
Choosing the windscreen or wind muff according to your own requirement and use
environment.
Tips: The furry windscreen should be used in combination with the foam
windscreen.
Installation Steps
Camera:
Using the microphone with cameras, camcorders audio recorders and other
audio/video recording devices.
- Fix the microphone to the shock mount and loosen the locking knob of its cold shoe mount, then slide the mount onto the camera.
- Tighten the locking knob, to secure the microphone.
- Use the 3.5mm TRS to TRS audio cable to connect the camera and microphone.
Phone:
Using the microphone with the Smartphone, tablet or Mac.
- Screw the shock mount into the phone clip, secure the microphone to the mount, and use the clip for the phone
- Plug the 3.5 mm TRRS connector into the audio jack of your smartphone, tablet or Mac.
- Open the audio-only or video recording app and begin recording.
Notice
- Devices that don’t have a 3.5mm audio jack need an official adapter(not included).
- The Sentech microphone is a directional microphone. Please point the microphone towards the sound source to achieve the best recording.
- For phone use, adjust the recording gain through third-party software.
- Some cameras have an internal option to adjust the recording gain.
- When connected to a computer, you can adjust the recording gain in the settings.
Frequency Response
Polar Pattern
FAQ
1. Why doesn't it work when connected to my phone or camera?
CD Please make sure that your device supports audio input functionality. ® The versions above iPhone 7 and certain Android phones, do not have a 3.5mm audio interface and require an official adapter for the corresponding phone model. @3 We provide two different connecting cables (for phones/cameras). Please pay attention to distinguish ing them and choose the correct end for connection. @ After a successful connection, there will be no prompt sound or pop-up notification. This is normal, as the microphone is working. @ The built-in camera app on some Android phones does not support external audio recording devices. Please use a third-party app for video recording or recording. @ Test your device's audio interface with other microphones or audio input devices to confirm it's functioning properly and undamaged.
2. What should I do if I get a buzzing sound or connection interruption while recording?
Step 1: Check for any damage or corrosion due to rust on the connecting cable, adapter, and device input port. Step 2: Ensure that there are no water or foreign objects in the connecting cable port or device input port, and verify that they're securely connected. Step 3: Determine if your device's low battery power has triggered the internal circuit protection and disconnected the connection.
3. Why is the recorded sound unclear or very low?