TIYOON K2 Wake Up Light Bluetooth Speaker User Manual

TIYOON K2 Wake Up Light Bluetooth Speaker

Product Information

The Wake-up Light Bluetooth Speaker is a multifunctional device that combines a wake-up light, night light, Bluetooth speaker, and FM radio. It features various settings and controls to enhance your waking up and sleeping experience.

Product Appearance:

• RGB magic color switching
• Wake-up light switch / RGB monochrome switch
• Light brightness setting
• Bedtime countdown switch / time setting
• Alarm 1 switch / setting
• Daily alarm / weekday alarm / weekend alarm / setting
• Drowsiness / drowsiness time setting / addition and subtraction settings / light switch / radio FM
• Alarm 2 switch / setting
• Time brightness setting / Bluetooth switch
• Volume setting
• Radio switch / automatic station search
• Sleeping music switch / switch
• USB output
• Type-C input

Setup and Maintenance:

1. Power on for the first time: Connect the AC adapter jack to the Type-C jack of the wake-up light and plug it into the 100V-240V home socket.
2. Product preservation: Place the alarm clock in display cabinets or store it in boxes in a cool and dry place.
3. Product cleaning: Wipe off dust with a soft wet cloth. Do not use liquids or abrasive cleaners.

Product Usage Instructions

Time Setting:

1. Long press [button] to enter time setting.
2. In the time display state, long press [button] to enter the 12/24H setting. Rotate to set the desired format.
3. Click [button] to enter the clock setting. The clock will flash. Rotate to set the current clock.
4. Click [button] to enter the minute setting. Rotate to set the current minute.
5. Click [button] to enter the week setting. Rotate to set the week. Click [button] to exit the time setting.

Alarm Switch:
In the time display status, click [button] to open/close the alarm.

Alarm Mode Setting:
When the alarm is on, toggle the switch and adjust the daily alarm, weekday alarm, and weekend alarm in turn.

Alarm Setting:

1. Press [button] to enter the Setting.
2. Long press [button] , the clock will flicker. Rotate to adjust the hour.
3. Press [button] to confirm. Click to enter the minute setting and rotate to adjust the minute.
4. Press [button] to confirm. Click and enter the sound effect selection. Rotate to select the desired sound effect or turn off the wake-up sound.
5. Press [button] to confirm. Click and enter the volume adjustment. Rotate to adjust the volume.
6. Click [button] to confirm. Click to enter the maximum brightness setting of the wake-up light. Rotate to set the brightness or turn off the wake-up light.
7. Click [button] to confirm.

Note: The product may have additional features and settings not mentioned in this manual. Please refer to the complete user manual for detailed instructions.

Dear users, thank you for using our products. In order to make you operate the machine smoothly and get the most perfect products, please read the operation manual carefully.

Product Appearance Introduction

1. RGB magic color switching.
2. Wake-up light switch / RGB monochrome switch.
3. Light brightness setting.
4. Bedtime countdown switch / time setting.
5. Alarm 1 switch / setting.
6. Daily alarm / weekday alarm / weekend alarm / setting.
7. Drowsiness / drowsiness time setting / addition and subtraction settings / light switch / radio FM.
8. Daily alarm / weekday alarm / weekend alarm / setting.
9. Alarm 2 switch / setting.
10. Time brightness setting / Bluetooth switch.
11. Volume setting.
12.  Radio switch / automatic station search.
13. Sleeping music switch / switch.
14. USB output.
15. Type-C input

Setup and Maintenance

1. Power on for the first time
   Connect the AC adapter jack to the Type-C jack of the wake-up light and plug it into the 100V-240V home socket. (figure 1)

2. Product preservation
   Alarm clocks should be placed in display cabinets or stored in boxes or in a cool and dry place.

3.  Product cleaning
   Wipe off the dust with a soft wet cloth and do not use liquids or abrasive cleaners.

Time Setting

The time shows AM 12:00 when powered on for the first time

1.  Long press to enter time setting
   In the time display state, long press to enter the 12/24H setting, 12/24H will flicker, and rotate to set 12/24H.

2. Click to confirm to enter the clock setting
   Click to enter the clock setting, the clock will flash and rotate to set the current clock.

3. Click to confirm to enter the minute setting
   Click to rotate to set the current minute.

4. Click to enter the week setting
   Click , rotate to set the week, and the setting is complete.
   Click and exit the time setting.

Alarm Switch

Alarm switch
In the time display status, click / to open and close the alarm

User prompt
Alarm 1 and alarm 2 operate in exactly the same way

Alarm Mode Setting

Alarm mode setting
When the alarm is on, toggle the switch and adjust the daily alarm, weekday alarm and weekend alarm in turn. Do the following:

Alarm Setting

1. Press to enter the Setting
   Long press , the clock flickers, rotate to adjust hour

2. Press to confirm
   Click to enter the minute setting and rotate to adjust the minute:

3. Press to confirms
   Click to enter the sound effect selection, rotate to select the sound effect, and the screen displays OFF and S01-S08 (01 is the change value, corresponding to the sound suburb) (S08 is the radio) OFF turns off the wake-up sound.

4. Press to confirm
   Click and enter the volume adjustment, rotate to adjust the volume, and the screen displays V01-V16 (V16 volume is the largest)

5. Click to confirm
   Click to confirm to enter the maximum brightness setting of the wake-up light, rotate to set the brightness.
   The screen displays OFF and L01-L20 (L20 is the the brightest), and OFF turns off the wake-up light.

6. Click to confirm
   Click to enter the early light and wake-up light setting, and rotate to set to light up 10-60MIN ahead of time.

7. Click to recognize and exit the alarm setting
   (Alarm 1 and alarm 2 are the same)
   User hint: wake-up sound / For wake-up lights, one of them can only be turned off or all of them can be on together.

Sleepy Setting

1. In the time display state, press long to enter the sleepy setting.
   Display interface: during drowsiness time, it begins to flicker, rotate to set sleepiness duration; setting range is 5-20min.

2.  Click to confirm
   Display interface: ON/OFF begins to flash, rotate to set sleepy wakeup light switch.
   ON turns on the wake-up light (the light is always on in the sleepy state).
   OFF turns off the wake-up light (sleepy state light goes out)

3. Click to confirm and exit the sleepy setting.
   User prompt: if the alarm clock is set to turn off the wake-up light, the sleepy setting light is automatically turned off.

Operation when the Alarm Goes off

After the alarm is turned on, the wake-up light will be turned on at the preset time: the whole sunrise simulation, the light will gradually increase. To the alarm time, the light will reach the preset brightness, and turn on the sound to wake you up. When the alarm goes off, you can do the following:

1. Pre-bright and sleepy
   When the alarm is prelist, click to turn off the wake-up light until the alarm goes off and turn on the wake-up light the next time.

2. The alarm is sleepy.
   The alarm goes off and click to enter sleepy mode.
   The sleepy setting time is over, the alarm goes off again, and you can repeat it many times.
   The number of drowsiness is unlimited.

3. Stop this noise.
   When the alarm going off / sleepy, click   or long press for 3 seconds to stop this alarm, and the off tone will ring and will not affect the next alarm.

4. Unmanned operation
   When the alarm goes off for 20MIN, there is no operation, automatically stop this alarm, and will not affect the next alarm.

FM Radio

1. FM switch
   In the time display screen, click to turn off the radio.

2. FM automatically searching the station
   In the FM open state, long press to enter FM automatic search mode, search range 76.0MHz~108.0MHz. When the search is completed, automatically play the last radio channel.

3. FM FM mode / console mode switch
   In the radio on mode, long press for 2 seconds to enter the tuner setting and rotate to adjust the console. Repeat the current action to enter the manual FM setting.

4. Volume adjustment
   Scroll to set the volume on the radio.

Bluetooth Function

1. Bluetooth switch
   In the time display state, long press for 2 seconds to turn Bluetooth on and off. After Bluetooth is turned on, the “Bluetooth mode” is broadcast, and the “BT” icon flashes in the display interface.

2. Bluetooth search
   Turn on the Bluetooth function of mobile devices (such as mobile phones, computers, etc.), search for Bluetooth device “K2” and manually click “K2” for pairing connection.

3. Bluetooth connection
   Successful connection, broadcast voice “paired successfully” display interface “BT” icon will always be lit. After the Bluetooth connection is successful, the time will be automatically timed.

4. Clear pairing record
   In the Bluetooth connection state, long press for 2 seconds at the same time to clear the paired record, sound the prompt tone, and enter the state to be connected.

5. Bluetooth music switching
   Under the premise of Bluetooth music playing, rotate to switch the upper and lower heads.
   User prompt: rotate a small box to switch a song.

6. Bluetooth music playback and pause
   Under the premise of Bluetooth music playing, click to play pause music.

7. Bluetooth volume adjustment
   Scroll to set the Bluetooth playback volume.

Sleeping Music

1. Sleeping music switch
   Click to turn on the sleeping companion music and long press for 3 seconds to turn off the sleeping companion music.

2. Toggle sleeping music
   Sleep accompaniment music is on, rotate to set different music; set range of S01~S22

3. Volume setting of sleeping companion music
   Sleeping music turns on, scroll  to set the volume of sleeping music.

Countdown to Sleep Setting

1. Countdown switch
   Click to turn on the countdown, the countdown flashes for 5 seconds, rotate to set the countdown, and the setting range is (10~120 180 240 300 360 420 480MIN). Long press for 3 seconds to close the countdown.

2. Countdown companion sleep setting
   The countdown is on, and special effects such as FM, sleeping sound source, sunrise light, color light and so on can be turned on at will. After the related functions are turned on, they will be turned off synchronously after the countdown is over.

3. Check the length of sleeping companion. The countdown to sleeping companion is on. Click to view the length of sleeping companion.
   User hint : when the countdown time flashes, the volume and brightness cannot be set, the flicker ends, and it is used normally.

Lights – sunrise Lamp Setting

1. In the time display screen, click to turn on and off the sunrise light.

2.  Brightness setting of Sunrise Lamp
   Sunrise light on state, scroll to set sunrise lamp brightness.

3. Sunout light switch setting

Lights-Color Lamp Setting

1. Color light switch setting
   In the time display interface, press for 2 seconds to turn on and off the lights.

2. Color lamp setting
   Turn on the lights, click , and adjust 7 kinds of red-yellow green- green- blue-purple in turn.

3. Color lamp brightness setting
   Color light on state, scroll to set color light brightness.

RGB – Special Effects Mode Setting

1. Light special effects switch
   In the time display interface, click to turn on the lighting effects,
   press for a long time, and turn off the lighting effects.

2. Special effects mode switching
   Click to toggle the lighting effects, where C08/C09 is Bluetooth music rhythm light effect.

3. Brightness adjustment
   Scroll to set the brightness of color lights

Screen Display Brightness Setting
Scroll to set the brightness of color lights
In the time display interface, click , to set the screen display brightness in turn, 5 positions can be adjusted (highlight-secondary highlight-medium light- low light-off)

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>