SOUNDPEATS Clear Wireless Earbuds User Guide
- June 14, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS Clear Wireless Earbuds
Product Information
The SoundPEATS is a pair of Bluetooth earbuds that offer wireless audio connectivity. It comes with touch controls and can be paired with various devices.
BLUETOOTH
How to pair SoundPEATS Clear?
- Open the charging case lid and remove the two earbuds. Peel off the insulation film from both earbuds. Place the earbuds back into the charging case, then take them out again. At this point, the left and right earbuds will automatically enter the TWS interconnection state. Once the interconnection is successful, both earbuds will enter pairing mode.
- Activate the Bluetooth on your device, then select “SOUNDPEATS Clear” from the Bluetooth device list to complete the pairing process.
How to reset SoundPEATS Clear
With the earbuds inside the charging case press and hold the charging case
button for 10 seconds until the charging case indicator light flashes white
and red twice. The reset process is complete.
Why is the Bluetooth connection unstable sometimes?
| Reasons | Workarounds |
|---|
Case 1
| When using the earbuds close to personal computers, Wi-Fi routers, microwave ovens, refrigerators, etc.
Refrigerators, microwave ovens, Wi-Fi routers, personal computers, etc. are devices that emit radio waves.
The earbuds may be affected by these radio waves when using them in a location with a mixture of multiple radio waves.
| Please use the earbuds away from Wi-Fi routers, personal computers, microwave ovens, refrigerators, etc. to avoid radio wave interference.
Case 2
| When using the Bluetooth device in the pocket of the chest or pants, or a bag while listening to the audio.
If the engine ear is diagonal to the Bluetooth device, it will affect the Bluetooth signal. As human body is the biggest source of signal blocking.
| When putting the Bluetooth device in a pocket or bag, move the Bluetooth device to a place where there are no obstacles between the Bluetooth device and earbuds (such as the human body) for
Bluetooth communication.
| When using the earbuds close to the other Bluetooth
devices.
| Turn off the Bluetooth
the function of the other
Case 3| The earbuds may be affected by these radio waves when using them in a location with a mixture of multiple radio
waves.
| Bluetooth devices.
---|---|---
Case 4
| When using the device away from the earbuds, such as in a different room.
Bluetooth communication gradually becomes weaker the further away Bluetooth earbuds are placed from a Bluetooth player. When using Bluetooth earbuds and a Bluetooth player in different rooms with the doors closed, Bluetooth
communication may be weak.
| Keep the Bluetooth earbuds as close to the Bluetooth player as possible.
Case 5
| When a lot of applications are running at the same time when using the Bluetooth function.| Quit apps that you are not
using on the device to reduce the load.
What can I do if the earbuds stop connecting to my devi ce?
- Clear the pairing record between the earbuds and all of the previous devices.
- Try to clear some Bluetooth listings on your device and restart the device.
- Put the earbuds into the charging case to reset.
- Activate Bluetooth on the device, and choose “SOUNDPEATS Clear” on the Bluetooth list to pair.
What can I do if the left earbud and the right earbud don’t work together?
- Please use a bit of light sandpaper or microfiber cloth with a bit of rubbing alcohol to clean the charging connectors to ensure the earbuds charge well.
- Put them into the charging case to reset.
What can I do if the earbuds connect to my phone, but not my Macbook/computer?
- Unpaired earbuds are from the phone, the earbuds will lose Bluetooth connection to the phone.
- Put the earbuds into the charging case to reset.
- Then open the Bluetooth of your Macbook/computer to connect.
- If those do not help, you may need to update your computer’s Bluetooth driver. There is no driver for it. Bluetooth drivers must come from the specific manufacturer for your exact computer model. Download and install the appropriate Bluetooth driver from the computer vendor’s website, then restart your system before attempting to pair and connect to your SoundPEATS earbuds.
Why is the signal intermittent when I am outdoors?
In the outdoors, the Bluetooth signal will be interfered with, such as subways, high-speed rails, trains, dense traffic lights, car engines and so on. And if the phone is in your pocket, and the engine ear is diagonal to the phone, it will affect the Bluetooth signal. As human body is the biggest source of signal blocking. So when the left earbud is the engine earbud, please put your phone in the left pocket, which will be better.
SOUND
Why does the volume of the earbuds reduce after using a period?
- It may be caused by the sound hole being blocked by foreign objects. Please try to gently clean it with a little alcohol to avoid dust or secretions blocking.
- Please change other devices to see if the problem still exists.
- Please also try to remove the silicone earpiece and gently clean off the screen with a little alcohol to see if that will help.
What can I do if one earbud is quieter than the othe r?
- Please change other songs or videos. For some songs and videos, the sound effect is unstable.
- Please change other devices. You can try this way:
- Unpaired and delete from your original device
- Pair to a new device and play music
- Unpaired and delete from this new device
- Pair back with the original device
- Please also try to remove the silicone earpiece and gently clean off the screen with a little alcohol to see if that will help.
- Try to reset the earbuds.
- Please also adjust the “Audio Equalizer” in your phone to see if it helps:
SOUNDPEATS
- For iPhone: [General] – [Accessibility] – [Hearing]
- For Android: [Accessibility features] – [Accessibility] – [Audio balance]
Why the other side could not hear me when calling?
- Please choose to pick up phone calls via the earbuds.
- Please do not mute the phone calls.
- Please clean the Mic holes to avoid dust or secretions blocking.
- Please wear both earbuds instead of any single one.
- Please kindly adjust the volume through the earbuds and devices.
- If you are using the earbuds with an Android phone, please check the settings to see if you have allowed both phone audio and media audio to be transmitted through the earbuds.
- Please change other devices to have a try.
Why doesn’t the mic work well when the earbuds are connected to the PC/laptop?
When you connect our earbuds to the PC/laptop, for some devices in the old
Windows version, it may show two lists:
“SOUNDPEATS Clear Hands- Free AG Audio”
“SOUNDPEATS Clear Stereo”
Please kindly choose “SOUNDPEATS Clear Stereo” to play media audio, and if you
use call audio, you can manually change to “SOUNDPEATS Clear Hands- Free AG
Audio” to give a try.
If you want to use call audio via the earbuds on your Mac or Windows, please set the as follows:
- A) Input device:
- Disable: Realtek(R) Audio as a speaker and “SOUNDPEATS Clear Stereo”
- B) Output device:
- Disable: Realtek(R) Audio as microphone or stereo mix
- C) Please only set “SOUNDPEATS Clear Hands- Free AG Audio” as the Input device and Output device. Then you will use earbuds to make call audio.
CHARGING
What does the indicator light of the charging case display?
SOUNDPEATS
- Charging Case Battery Indicator:
- 100%-50% Green
- 49%-10% Yellow
- <10% Red
- 2. Charging Case Indicator while Charging:
- <10% The Red light flashes slowly
- 11%-49% The Yellow light flashes slowly
- 50%-99% The Green light flashes slowly
- 100% The Green light stays on
How to charge the charging case?
- Connect the charging case to a Type-C charger.(The current doesn’t exceed 1A)
- If the earphones stay idle for an extended period, charge them at least every three months to prevent the battery from being damaged.
What should I do if the charging case won’t charge?
Please try to use another known working charging cable to charge the charging
case for more than 10 hours through your computer.
Compared to other electronics, the headphones are low power products. Hence
for charging safety, please do not use a fast charger.
Why are the earbuds still connecting to my phone after placing them back and closing the case lid?
- The charging case has no remaining power. Placing the earbuds back into the charging case can’t turn them off if the case battery is dead.
- Please make sure the earbuds are correctly placed in the charging case, and make sure the charging contacts are clean. Please try to clean the places between the charging case and the earbuds with something like a microfiber cloth.
Do the earbuds not use for a long time without charging cause the earbuds not to turn on or the battery to drain quickly?
The battery of the earbuds needs maintenance.
SOUNDPEATS
You need to charge your electronics at least every three months, if not, the
earbuds can cause deep self-discharge by not charging for a long time,
damaging the battery. In addition, not using the earbuds for a long time, and
the earbud’s storage location is not dry, moisture will also cause damage to
the earbuds. If you haven’t used your headphones for several months, the
battery is probably dead.
At this point, we suggest that you first check whether the charging case has
power (whether the indicator light is on) and whether the charging contact at
the bottom of the earbuds and charging case is dirty. If there is dirt, please
clean the charging contact at the bottom of the charging case with a dry cloth
or dry paper towel. As for earbuds not turn on or the battery drains rapidly
when earbuds are taken out of the case, we recommend you repeatedly place the
earbuds into the charging case for 2 hours and close the cover. Please try it
for 1-2 days.
TOUCH CONTROL
What can I do if the touch controls do not work always?
- Please touch the middle of the control zone. And when your hand is wet, the touch control may not work, please keep your hand dry.
- Please try to skip the songs more times, you will find the best frequency to control the earbuds. When you don’t find the frequency you may think the earbuds don’t work, please give it some patient.
- Another way for you to have a try: discharge the earbuds, then charge and reset.
APP
How to register an account?
- Fill in the email address; set and confirm the password(use some combinations of letters and numbers, avoid special characters like %$#@)
- Click “get verification code”
- Type in the code you get from your email
- Finish the register
Failed to receive the verification code?
- Make sure your phone is connected to a good network and try to send the code again about 2 minutes later;
- Check your spam folders/junk inbox first
- Try to register with a different email address, uninstall the App and then reinstall it, and restart your device to register again
- Please manually type your e-mail into the area instead of auto-fill in your e-mail address, and also please pay attention to the format of English letters and the space before and after the email address
- Please try to turn off the anti-virus software. If you have data encryption software on your phone, you may have to turn it off momentarily
What can I do if the earbuds won’t connect to the APP?
-
Please first to check if your SoundPEATS earbuds app has updated to the newest version.
You can log in to the app and find the icon with three bars in the upper left corner, find “about” to check the SOUNDPEATS version. Please upgrade to make sure you get the newest version. -
Please make sure that the earbuds’ Bluetooth name is the default
“ SOUNDPEATS Clear “. If you changed the default name, please change it to its original format. Then restart your phone. Please note that if you change the default Bluetooth name of the model, it may cause a connection issue to this app. -
Please make sure the location function of your mobile phone is turned on, and authorize our app to obtain all permissions needed from your phone to make the connection easier. Please allow the app to always access the phone information, and do not choose the blank pass of the system.
-
Please make sure both earbuds pair with each other, then connect to your phone first. After the earbuds are connected to your phone, please open the app to connect the earbuds.
-
If the earbuds cannot connect to an app, please follow the steps one by one:
-
try to turn off the earbuds app completely (Turn off the background running of the app totally);
-
unpaired the earbuds via your phone, then turn off the phone Bluetooth;
-
put two earbuds into the charging case and do a reset as the manual;
-
reconnect the earbuds to your phone first after resetting (In this step, please make sure the SoundPEATS APP is off);
-
re-open the app to search for earbuds to connect to the app;
What can I do if the APP cannot update?
Please try the following:
- Please try to reset the earbuds as per the manual;
- Take the earbuds out of the charging case and leave some time for the two earbuds to pair with each other. Then please turn on the blue tooth of your phone to connect with the earbuds;
- Make sure your phone is connected to a good network. Turn off the app and reopen it;
- Try to connect the app to your phone and do the upgrade again;
Precautions during the app upgrade process:
- During the upgrade, the distance between the earbuds and the mobile phone must be within 0.5 meters;
- Do not put the earbuds into the charging case;
- Do not disconnect, play music, or answer the phone calls;
- Don’t close or shrink the upgrade page;
CUSTOMER SERVICE TEAM
What should I do if the problem with the earbuds is not mentioned in this FAQ?
If there is no solution for your problem in this FAQ, please feel free to contact our Customer Service Team and we will provide you a solution as soon as possible. If we confirm that the problem can’t be solved, we will apply for a replacement or refund for you. SoundPEATS provides a 12-month warranty for every product. Your satisfaction is always greatly important to us.