DIGITUS DA-70330-1 Card Reader Installation Guide
- June 4, 2024
- DIGITUS
Table of Contents
DIGITUS DA-70330-1 Card Reader
The DIGITUS USB 3.0 “All-in-One” card reader enables you to transfer your digital content to a PC or Mac in a very fast and easy way. The product gives you the ability to use nearly every type of memory card.
Product Function
- Read and write SD, miniSD, CF, MS, XD, M2, MicroSD Card (TransFlash)
- Support Hi-speed cards SDXC, MS etc.
- Supports two cards at the same time
Specification & Features
- Compliant with USB3.0 down compatible with USB2.0/1.1
- Support the following speed rate: Low-speed (1.5Mbps)/Full-speed (12Mbps)/High-speed (480Mbps)/Super-speed (5Gbps)
- Support Extended Capacity SD Memory Card (SDXC): more than 32GB and up to 2TB
- Support MSPRO-HC Duo8-bit mode
- Support SDHC memory card
- Support MSXC memory card
- Support CFV4.1 WITH PIO mode 0-6, Multi-word DMA mode 0-4 and Ultra DMA mode 0-6
- Support CF v5.0 with LBA48 (draft spec., not final)
- Support Windows 2000/XP/Vista/7/8/10, Mac 10.x
Package Content
- Card Reader
- USB 3.0 connection cable, A/M – A/M, 1.0 m
- User manual
Application
Notes
Warning: This device is a class B product. This equipment may cause some radio interference in living environment. In this case, the user can be requested to undertake appropriate measures to prevent interference.
Hereby ASSMANN Electronic GmbH declares that this device is in compliance with the requirements of Directive 2014/30/EU and Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the below-mentioned manufacturer address: www.assmann.com
Assmann Electronic GmbH
ADDRESS: Auf dem Schüffel 3 58513 Lüdenscheid Germany