Veise KS02B Door Knobs Installation Guide
- June 14, 2024
- Veise
Table of Contents
Installation Instructions
of Door knob Installation Guide
KS02B Door Knobs
Thank you fo purchasing aur products. Please review this manual thoroughly
baforo operatng your dovice.
Al pictures i this manual are fo istration purpos only. Actual procuct may
vary us to product upgrace.
Parts list
| |
---|---|---
| |
Prepare the door and check dimensions
If your door already has the holes shown in the picture below, proceed to the
next step, if your door does not have holes, use the mounting template to
drill a new hole. 
Latch backset adjustment
Backset is the distance from the door edge to the center of the hole in the
door.
The latch is provided with adjustable design which can fit either 2-3/8″(60mm)
or 2-3/4”(70mm) backset.
A. If the backset of your door is 2-3/8″(60mm), no need to adjust the latch.
B. If the backset of your door is 2-3/4″(70mm), please adjust the latch.
Install latch and strike
Important: The latch should be aligned with the chiseled property. Important: Make sure the hole in door frame is drilled a minimum of 1″ (25mm) deep.
Install front and rear knob
Test the knob
Keep the door open, checking out front and rear knob to test if it works
properly. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>