W-KING D10 Portable Bluetooth Speaker User Manual
- May 16, 2024
- W-KING
Table of Contents
User Manual
D10 Portable Party Soeaker
W-KING® is a registered trademark in the U.S. and European Union. All rights
reserved.
D10 Portable Bluetooth Speaker
Sound Great!
Why not help other people hear something special?
Tell your friends and family
Share your experience by writing an online review
Not As Good As I Hoped…
We can put things right for you.
Our friendly customer support team are always here to help you: Amazon E-mail:
support.amazon@w-king.com
Package Contents
D10 Portable Party Soeaker USB Type-C Charging Cable 3.5mm Audio Cable User Manual
Product Diagram
1. Power Button
2. Led Indicator
3. Volume Down /Previous Track Button
4. Play/Pause
5. Volume Up/ Next Track Button
6. Equalizer/ Sound Effect
7. Battery indicator| 8. Light Mode Button
9. Microphone Input
10. Reset
11. USB Port
12. AUX
13. TF-card Slot
14. USB Type-C Charging Port
---|---
Specification
| Model Number | W-KING DIO |
|---|---|
| Bluetooth Version | BT5.0 |
| Bluetooth Pairing Name | W-KING DIO |
| Speaker Output Power | 70w |
| Waterproof Grade | IPX6 |
| Product Size | 369mm x I94mm x 154mm/ 14.53″ x 7.64″x 6.06″ |
| Product Net Weight | 3040gt 100g |
| Frequency Range | 70Hz-20KHz |
| THD | sl%at 1KHz 1M/IW |
| S/N | 28ODB |
| Support Profiles | HFP V1.5;A2DP VI .2:AVRCP V1.4, GAVDP V1.2; AVDTP V1.2;SPP |
V1.2;AVCTP V1.2
True Wireless Stereo| Yes
Phone/Table Charge| Yes
Music Source Input| Support Bluetooth / AUX / TF-card in
Power Bonk Function| Support power bank function. output:5V/2.1A
Operation Instruction Charging
- Fully Charge this speaker before first Use.
- Use the included USB Type-C charging cable and a 5V 2A power adapter to charge your speaker. The power adapter is NOT INCLUDED.
- When there are 3 solid white lights, your speaker is fully charged and ready for use.
Battery
| Battery Type | 7800mAh |
|---|---|
| Battery Voltage | 7.2V |
| Low battery alarm (When battery voltage lower than 6.9V (20%) & 6.2V (10%)) |
Red LED flashes
Automatically turn off at low battery (When battery voltage lower than 0%))| /
Input voltage/current| TYPE-C USB :5V/2.4A
Charging time| Around 7.5 hours
Power On/Off
| Actions | Operation | LED status |
|---|---|---|
| Power on | When the speaker on power off status, press and hold the power | |
| button for 2 to 3 seconds. | Blue LED on | |
| Power off | When the speaker on power on status, press and hold the power | |
| button for 2 to 3 seconds. | LED turns off |
Connection Way
1. Bluetooth Pairing
| Actions | Operation | LED status |
|---|---|---|
| Pairing | Automatically enter pairing mode when turn on the speaker. | Blue LED |
flash
Connected| Select the Bluetooth pairing name “W-KING D10” on mobile phone.|
Blue LED stays on (successfully paired)
Disconnected manually| Press volume + and volume – at the same time for 2-3
second.| Blue LED flash
Reconnect| Speaker will reconnect with last device when power on.| Blue LED
stay on
2.Other Connection Way
| Actions | Operation | LED status |
|---|---|---|
| AUX Mode | Insert AUX cable to enter AUX mode. | Play: green LED slays on Pause: |
green LED flashes
TF-Card Mode| Insert TF-cardlo enter TF-card mode.| Indoor mode: green LED
stays on
Outdoor mode: green LED flashes slowly
Switch Mode (Bluetooth/ AUX/TF-Card)| Short press power button to switch .
(Note: The mode can only be changed when there are more than two connection
modes at the same time.)| /
Note:
- If a code or pin is required for pairing, please enter “0000”
- The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired.
- If soeaker can not enter pairing, please reset the speaker to clear the pairing list or any program erros.
- The speaker can remember last volume and mode, it will continue at the same status when turns on again.
- If your paired device is switched off or manually disconnected, the speaker will enter pairing mode and automatically shut down after 10 minutes.
- If the soeaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter wireless range within 10 minutes. To connect to other devices, please repeat the previous “Pairing” steps.
Hands-Free Calling
| Actions | Operation | LED status |
|---|---|---|
| Pick up the coll | When receive a phone coll,short press “ploy/pause” button. |
Blue LED stays on
Hong up| During a phone coll. press the “play/pause” button.| Blue LED stays
on
Reject the coll| When receive a coll, long-press the “play/pause” button.|
Blue LED stays on
True Wireless Stereo
| Actions | Operation | LED status |
|---|---|---|
| Power on | Turn on both D10 bluetooth speakers. (note: Please make sure that | |
| the Bluetooth of your two speakers is not connected) | Blue LED on | |
| True Wireless Stereo | Select one speaker as the master speaker. and then | |
| double press the power button of the master speaker to start pairing. | Blue |
and green LED flash
(master speaker)
Connection between two speakers| Successfully connection. (do nothing, just
wait pairing)| Slave speaker
blue LED stay on. blue LED on master flash slowly
Connect with mobile| When” True Wireless Stereo” successfully connected, open
Phone’s Bluetooth to search and connect the master speaker.| Moster and slave
speaker blue LED stay on
Note: In “True Wireless Stereo” mode, only the master speaker has phone call
function.
Basic Control
| Actions | Operation | LED status |
|---|---|---|
| Adjust Volume | Short press volume+/- button | / |
| Next/Previous Track | Press and hold volume + /- button | / |
| Pause/Play/ Mute | Press the Ploy/Pause button | |
| (In AUX mode, it’s a mute function) | / | |
| Switch Equalizer Mode | Short press Equalizer button | Default setting: turns on |
Enhance bass Equalizer: slowly flashes
light Mode| Short press light mode button| /
Reset| Press the reset button| LED turns off
Microphone function (The following situations are all after the microphone is connected)
| Actions | Operation |
|---|---|
| Mic Volume Mode | Press and hold the “Equalizer” button until you hear ONE |
“bee-“,then short press “Volume +/-” buttons to adjust volume.
Music Volume| When you enter mic volume mode , 10 seconds of no operation will
automatically enter the music volume, then Short press “Volume +/-” buttons o
adjust music volume.
Product Care & Use
- Keep away from liquids, extreme heat, and strong magnetic fields.
- Do not use this soeaker at high volume for extended periods, as this may cause permanent hearing damage or loss.
Warranty & Customer Support
For questions, support, or warranty claims, contact us at Amazon E-mail:
support.amazon@w-king.com or Walmart
E-mail: support.walmart@w-king.com which
corresponds with your region. Please include your Amazon order number and
product model number.
Please note, W-KING can only provide after-sales service for products
purchased directly from our official online store. If you have purchased from
a different seller, please contact them directly for service or warranty
issues.
Notice for US
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device will not cause harmful interference.
- This device accepts any interference received, including other Bluetooth interference that may cause undesired operation.
FCC Rules
This equipment had been tested and found to comply with the limits for Class B
digital devices, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
communication. However. There is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modifications made to this device not expressly approved by
W-KING may void the FCC authorization to operate this equipment.