beurer LR330 Air Purifier Instruction Manual

beurer LR330 Air Purifier

Product Information

• Product Name: LR 330 Air Purifier
• Languages: German (DE), English (EN), French (FR), Spanish (ES), Italian (IT), Turkish (TR), Russian (RU), Polish (PL)

Product Usage Instructions

• Introduction:

  • The LR 330 Air Purifier is designed to clean and purify the air in your surroundings.
  • The principle of air purification is explained in the user manual.

• Safety Warnings:

  • Keep children away from packaging materials to avoid choking hazards.
  • Avoid electric shock by following the safety precautions mentioned in the manual.

• Delivery Contents:
  The package includes the LR 330 Air Purifier along with various accessories.

• Repair:
  The user manual provides warnings and instructions related to repairs.

• Parts and Display:

  • The air purifier consists of a water tank, air outlet, illuminated display, pre-filter, filter cover, power cable, humidification discs, and an air inlet.
  • The display and buttons are used for operating the device.

• Getting Started:

  • Remove the air purifier from its packaging.
  • Place the air purifier in a suitable location.
  • Prepare the device for operation by following the instructions provided.

• Operation:

  • Turn on the air purifier using the power button.
  • The display shows the current humidity level.
  • The air purifier has a timer function that allows you to set a specific operating time.
  • You can choose from three humidity levels: High, Middle, and Low.
  • Set the desired humidity level using the controls provided.
  • When the water tank is empty, the device will stop humidifying.

• Maintenance and Replacement:

  • The user manual provides instructions on how to replace the combination filter and pre-filter after 1000 operating hours.
  • Clean the filters and humidification discs regularly as instructed in the manual.

• Cleaning and Storage:

  • Before cleaning, ensure that the device is unplugged.
  • Clean the filters and humidification discs as instructed in the manual.
  • Store the air purifier properly when not in use. 10. Troubleshooting:
  • The user manual provides a list of common problems and their possible causes.
    Please refer to the user manual for detailed instructions and safety information specific to your language.

WARNING

• This device may be used by children over the age of eight and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
• Children must not play with the device.
• Cleaning and user maintenance must not be performed by children unless supervised.
• Disconnect the device from the mains supply during cleaning.
• Clean the device using only the methods specified. Under no circumstances must liquid enter the fan unit.
• Do not use any solvent-based cleaning products.
• If the mains connection cable of this device is damaged, it must be disposed of. If it cannot be removed, the device must be disposed of..

Dear customer,
Thank you for choosing one of our products. Our name stands for high-quality, thoroughly tested products for applications in the areas of heat, gentle therapy, blood pressure/diagnosis, weight, massage, beauty, air and babycare.

Included in delivery

• 1x Air purifier
• 1x combi filter (activated carbon/EPA filter class E 10)
• 1x pre-filter
• 1x these instructions for use

Signs and symbols
The following symbols appear in these instructions for use:

Getting to know your device

Humans spend a large proportion of their time indoors. The air indoors is often polluted with dust particles, pollen, animal hair, odours, harmful gases as well as various bacteria and viruses and, particularly in winter, is also too dry. Ambient air that is too dry and contaminated may have a number of negative effects. The LR 330 air purifier humidifies air that is too dry and simultaneously cleans the air with a 3-layer filter system.
The LR 330 air purifier

• Washes and humidifies air particularly hygienically
• Filters air with a combi filter (Activated carbon filter against harmful gases and unpleasant odours, EPA filter E 10 against particles such as bacteria, viruses, mites, pollen and fine dust)
• Operates quietly with three output levels
• Can humidify a room up to a preset target humidity (e.g. 55% air humidity)
• Has a timer function (1 to 12 hours)
• Suitable for rooms up to 35 m² in size
• Consumes little energy and automatically switches off if the water runs out

Principle of air cleaning

1. The quiet and low-energy fan sucks the contaminated air in from the side air inlet.

2. The contaminated air is pre-cleaned by the built-in combi filter (activated carbon filter/EPA filter). In addi-tion, the pre-filter filters larger particles and hairs (in general) from the air.

3. The air passes over the disc set that continuously rotates in the tray and picks up calcium-free humidity.

4. The cleaned air that is enriched with water is emitted via the air outlet on top of the Air purifier into the ambient air.
   The EPA E 10 filter has a filter performance of 85%. That means that 85% of particles (e.g.bacteria, viruses and fine dust) can be filtered out.

5. A relative humidity of between 40 and 60% is generally recommended. This value is often not reached in winter when cold air enters living spaces that are being aired and is then warmed up. Air can absorb more humidity in line with increasing air temperature. The air tries to compensate by taking humidity from other sources such as mucous membranes, skin, furniture and accessories, etc. This may have a number of negative eects:

   • Mucous membranes dry out, lips become chapped and dry, eyes become irritated
   • Exhaustion, tiredness and diculty concentrating
   • Pets and plants are put under unnecessary strain
   • Promotion of dust and electrostatic charging of textiles made of synthetic fibres, carpets and plastic floor coverings
   • Damage to furniture made of wood, particularly parquet floors
   • Detuning of musical instruments

6. Contaminated, unfiltered air can have the following effects:

   • Infections and respiratory diseases are more likely to occur
   • Damage to health through harmful gases

Intended use

This Air purifier is intended to clean and humidify the air indoors.
WARNING

• If you suffer from severe respiratory or lung disease, consult your doctor before using the Air purifier.
• This device must only be used for the purpose for which it was designed and in the manner specified in the instructions for use. Improper use can be dangerous. The manufacturer is not liable for damage resulting from improper or careless use.

Notes
Read the notes carefully! Non-observance of the following information may result in personal injury or ma-terial damage.

• WARNING

  • Keep packaging material away from children to avoid danger of suffocation.
  • Electric shock

• WARNING
  As with every electrical device, use this Air purifier carefully and cautiously, in order to avoid hazards due to electric shock.

  • Therefore, observe the following instructions for use:
  • do not operate the device at voltages other than those indicated on the device (the type plate is located underneath the device)
  • never if it or its accessories show visible signs of damage
  • not during a thunderstorm
  • In the event of defects or operational faults, switch the device off immediately and disconnect it from the mains socket. Do not pull on the mains cable or on the device to disconnect the plug from the socket. Never hold or carry the device by the mains cable. Keep the cables away from hot surfaces.
  • Always switch off the device before disconnecting it from the mains.
  • Never disconnect the mains plug with wet or damp hands.
  • Keep the device away from sources of heat as the housing could melt and trigger a fire.
  • Ensure that the openings of the Air purifier and the mains cable do not come into contact with water, steam or other liquids.
  • Do not use the device in close proximity to flammable or explosive gas mixtures.
  •  Never reach for a device that has been submerged in water. Disconnect it from the mains plug immediately.
  • Do not use the device if it or its accessories are visibly damaged.

Repairs

• WARNING
  • Only specialist personnel may perform repairs on electrical devices. Improper repairs may subject users toconsiderable danger. For repairs, please contact Customer Services or an authorised retailer.
  • Do not open the fan unit.
  • Risk of fire
• WARNING
  • There is a risk of fi re if the device is used improperly or these instructions for use are ignored.
  • Therefore, observe the following instructions for using the Air purifi er:
  • Never use underneath a cover, such as blanket, pillow, etc.
  • Never use near petrol or other highly fl ammable substances.

Handling
IMPORTANT
The device must be switched o and disconnected fr om the mains after every use and before cleaning.

• Do not place any objects in device openings or in rotating parts. Ensure that the moving parts can move freely at all times.
• Do not place any objects on the device.
• Do not expose the device to high temper atures.
• Protect the device against sunlight and impacts and do not dr op it.
• Never shake the device.
• Avoid water damage by handling the device car efully (e.g. water damage from splashing in the vicinity of wooden fl oors).
• Place the device on a fi rm, level and water-resistant surface.

Device description

1. Housing cover

2. Water tank and screwed plug

3. Air outlet

4. Illuminated display

5. Air inlet

6. combi filter (activated carbon/EPA filter class E 10) Activated carbon filter: against harmful gases, VOCs (volatile organic compounds) and unpleas- ant odours EPA filter class E 10: Filters particles such as bacteria, viruses, mites, pollen and fine dust

7. Pre-filter
   Filters coarse dust and dirt, such as hairs

8. Filter cover

9. Mains cable

10. Disc set

11. Tray

Display and buttons

1. ON/OFF button
2. TIMER button
3. FAN SPEED button
4. TARGET HUMIDITY button
5. CHANGE FILTER button
6. Timer symbol
7. Water tank empty symbol
8. Change fi lter symbol
9. Target humidity/current humidity
10. Fan speed settings

Initial use

Removing the air purifi er

1. Open the cardboard packaging.
2. Remove the device from the top of the box without opening the fi lm bag.
3. Now remove all fi lms and the transport lock of the disc set (in the tray). Ensure that you remove all the foam padding from the disc set. Remove the combi fi lter and prefi lter from the fi lter cover. Then remove the plastic fi lm and re-insert the combi fi lter and prefi lter.
4. Check the device, tray with disc set, mains plug and cable for damage.

Setting up the air purifi er

1. Place the air purifi er on a fi rm, level and water-resistant surface to prevent vibrations and noise.
2. Set up the air purifi er in such a way that provides 30 cm clearance on all sides.
3. Make sure that the air inlet and air outlet are never blocked.

Preparing for the application

1. Remove the top housing cover.
2. Carefully pull out the water tank from above.
3. Unscrew the seal on the water tank. Fill the water tank right to the top (approx. 4.6 l) with fresh, cold tapwater.
4. Close the water tank again. Ensure that the screwed plug is screwed on correctly and the water tank issealed shut.
5. Carefully place the water tank back into the housing from above.
6. Replace the top housing cover back onto the housing.
7. Insert the mains plug into the socket. Ensure that the cable does not pose a trip hazard.
   IMPORTANT
   Do not add any essential oils or fragrances to the water tank and/or the tray. If other additives are used, theplastic material may become discoloured and damaged.
   Tip:
   The addition of a small volume of conventional washing-up liquid (e.g. 1 drop) br eaks the water surface tension and incr eases evaporation output.

Operation

Switching on the air purifier

1. Always follow the instructions in chapter “5 Initial use”.
2. Press the ON/OFF button ( ) to switch on the air purifier. The current ambient humidity is shown on the display.
   When the air purifier is used for the first time it is set to the middle humidity level.

Timer function

• The air purifier features a timer function that you can use to determine the number of hours the air purifier should run for before it automatically switches itself off. You can set the timer for between 1 and 12 hours and can choose from the following targets:
  01 – 02 – 03 – 04 – 05 – 06 – 07 – 08 – 09 – 10 – 11 – 12 – 00 (continual)

• To set the timer, press the TIMER button ( ) until your desired hourly value (e.g. 02) appears on the dis-play. The air purifier will now automatically switch off after the set number of hours has passed.

Selecting the humidity level
The air purifier has three humidification levels that are shown in the display.

To switch between the individual humidification levels, press the fan speed button ( )

Setting the target humidity

• The air purifier can also be used to set a target humidity level. As soon as the set target humidity is reached in the room, the air purifier automatically switches off.

• You can choose from the following target humidities:
  40% – 45% – 50% – 55% – 60% – 65% – 70% – 75% – 80% – CO (continual)

• To set a target air humidity, press the air humidity button ( ) repeatedly until your desired target humidity is reached in the display.

  • After one minute the display and tank illumination automatically switch off. The air purifier is not switched off at this time. You can reactivate the display and the tank illumination by pressing any but-ton (except ON/OFF button).
  • If continual target air humidity (“CO”) is selected, the air purifier does not switch off. It humidifies un-til the water tank is empty.

Empty water tank
As soon as no water is left in the water tank, appears in the display and the device automatically switch-es off.
To top up the water tank, proceed as follows:

1. Press the ON/OFF button ( ) to switch off the air purifier.
2. Pull the mains plug out of the socket.
3. Remove the top housing cover.
4. Carefully pull out the water tank from above.
5. Unscrew the seal on the water tank. Fill the water tank right to the top (approx. 4.6 l) with fresh, cold tap water.
6. Close the water tank again. Ensure that the screwed plug is screwed on correctly and the water tank is sealed shut.
7. Carefully place the water tank back into the housing from above.
8. Replace the top housing cover back onto the housing.
9. Connect the mains plug to the socket and ensure that the cable does not pose a trip hazard.

Replacing the combi filter and pre-filter
The combi filter and the pre-filter should be replaced with new filters after 1000 operating hours. After 1000 operating hours, “CL” flashes in the display and the filter symbol ( ) appears.

1. As soon as “CL” appears in the display, switch off the air pu-rifier and disconnect the device from the socket.
2. Replace the combi filter and the pre-filter as shown in the image.
3. Connect the mains plug to the socket and switch the air pu-rifier back on.
4. Press and hold the filter button ( ) for 5 seconds. An acoustic signal sounds and the filter symbol goes off in the display. The operating hours counter now resets to 0.
   If you wish to change the combi filter at specific intervals (e.g. every six months), there is a sticker on the upper edge of the combi filter on which a date can be entered.

Cleaning and storage

Cleaning the filter

• Regular cleaning of the filter (once a month) is a prerequisite for hygienic and fault-free operation.
• Clean the three-layered filter using the brush attachment of a vacuum cleaner. To carry out a thorough clean, pull out the pre-filter and clean the activated carbon filter located behind it and the EPA filter located at the rear, also using the brush attachment from a vacuum cleaner. Then replace the pre-filter on the EPA filter.

IMPORTANT

  * The three-layered filter should be changed after 1000 operating hours (see “Filter change” section).
  * The three-layered filter cannot be washed.

Rinsing the tray

• Rinse out the tray every 2 weeks with warm water. If the air is heavily polluted, the device is used intensively or the water quality is poor, the air purifier must be cleaned at shorter intervals.
• Before you can pull the tray out for cleaning, you must first pull the water tank out of the air purifier from above. Remove any deposits in the tray using a soft cloth. When cleaning the tray, do not use any corrosive, caustic or sol-vent-based cleaning products.
  IMPORTANT
  Regular cleaning is a prerequisite for hygienic and fault-free operation. Always empty and thoroughly clean the water tank and the tray of the air purifier if the device contains water and has not been operated for longer than 3 days. A lack of cleaning and hygiene can cause bacteria, algae and fungi to form in the water.

Cleaning the disc set

• Before cleaning the disc set, pull it upwards and out of the device. Clean the disc set every 2 weeks with warm water and a soft cloth. If it is heavily soiled, you can also clean the disc set in the dishwasher. When cleaning the disc set, do not use any corrosive, caustic or sol-vent-based cleaning products.
• If it is heavily soiled, you can also clean the disc set in the dishwasher (max. 50°C). Remove the disc set from the tray and place it in the dishwasher. If there is insucient space in the dishwasher, create extra space by removing the cutlery basket, for example. The disc set must not be bent or jammed when being placed in the dishwasher. Set the dishwasher to a gentle cycle (for cleaning glass) and if possible remove the disc set before the drying process. The cycle must not exceed a temperature of 50°C – otherwise the disc set may deform. Only continue to use the device when the exterior of the disc set is completely dry.

Descaling the humidification discs and the tub
Depending on water hardness and if necessary, the tub and humidification discs must be descaled in order to maintain the performance of the air washer. For this purpose, use a standard descaling agent and obser-ve the information on the label.
Note: A light build-up of limescale on the humidification discs increases the evaporation output.

Cleaning the housing

Clean the housing of the air purifier with a damp cloth (water or a mild cleaning solution). When cleaning, do not use any solvents or other aggressive or abrasive cleaning agents, as the surface may become damaged.

Storage
If you do not plan to use the device for a relatively long period of time, we recommend that you thoroughly emp-ty, clean and dry the device and store it in the original packing in a dry environment, ensuring it is not weighed down by additional items. Please ensure in particular that there is no water in the water tank or in the tray.

What if there are problems?

Disposal

• For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accord –
  ance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).

• If you have any questions, please contact the local authorities responsible for waste disposal.

Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address (according to the service address list). Please state the corresponding order number.

Technical data

• Model LR 330
• Mains voltage / Output See type plate on the device
• Dimensions (L x W x H) 370 x 260 x 362 mm
• Empty weight 6.7 kg
• Suitable for rooms up to approx. 35 m2
• Tank capacity 4.6 l
• Tray capacity 1.3 l
• Evaporation output up to 220 ml/h
• Permissible operating conditions +5°C to +40°C, ≤ 90% relative humidity (non-condensing)
• Protection class Protection class II

Warranty/service

• In case of a claim under the warranty please contact your local dealer or the local representation which is mentioned in the list “service international”.

• In case of returning the unit please add a copy of your receipt and a short report of the defect.

• The following warranty terms shall apply:

  1. The warranty period for BEURER products is either 3 years or- if longer- the country specific warranty pe-riod from date of Purchase.
     In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or in-voice.

  2. Repairs (complete unit or parts of the unit) do not extend the warranty period.

  3. The warranty shall not be valid for damages because of

  • improper treatment, e.g. nonobservance of the user instructions.
  • repairs or tampering by the customer or unauthorised third parties.
  • transport from the manufacturer to the consumer or during transport to the service centre.
  • The warranty shall not be valid for accessories which are subject to normal wear and tear (cu, batte-ries etc.).
  4. Liability for direct or indirect consequential losses caused by the unit are excluded even if the damage to the unit is accepted as a warranty claim.

References

• Beurer-belarus - сайт официального представителя Beurer в Беларуси, интернет-магазин товаров из Германии в Минске
• Beurer Gesundheitsratgeber
• Beurer Health Guide
• Beurer — Beurer North America

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>