J-TECH DIGITAL JTDHDEX-1P Single Ethernet Cable Digital HDMI Extender User Manual

: June 14, 2024
: J-TECH DIGITAL

Table of Contents

**J-TECH DIGITAL JTDHDEX-1P Single Ethernet Cable Digital HDMI Extender
Safety Instructions:
Introduction
Features **
Package Contents
Specifications
Panel Information
Connection and Operation
Using EDID Copy Function
Maintenance
Warranty
Mail-In Service
Limited Warranty Limits and Exclusions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**J-TECH DIGITAL JTDHDEX-1P Single Ethernet Cable Digital HDMI Extender

User Manual
**

Safety Instructions:

Before using this product, please carefully read the following safety instructions to ensure its proper use and keep this manual for future reference:
To prevent electric shock, do not attempt to open the product.
Only qualified personnel should perform any repairs or maintenance.
Always place the product on a stable, flat surface to prevent it from falling.
Do not expose the product to water, moisture, or high-humidity environments to avoid the risk of damage.
To prevent damage from direct sunlight or high temperatures, do notexpose the product to such environments.
Do no place the product near heat sources like radiators, heatregisters, stove, or other heat-producing apparatus.
Do not place any objects on top of the product to avoid damage.
Use only the attachments and accessories specified by the manufacturer.
During lightning storms or prolonged periods of disuse, unplug the power supply to prevent damage.

Introduction

The JTDHDEX-1P HDMI over single ethernet extender is able to extend a 1080P audio/video signal up to 200ft. which is four times the transmission distance of a typical HDMI cable. The PoC (power over cable) function allows users to only use one power adapter between the transmitter and the receiver, making for a cleaner, clutter-free setup. This extender is viable in any installation, whether residential or commercial.

Features **

**

Extends 1080P signal up to 200ft. between the transmitter and receiver over a single IEEE-568B UTP cable (Cat5e/6/7)
Receiver can be powered by transmitters via PoC
Supports Deep Color up to 36-bit
Lossless compressed digital audio; Dolby TrueHD, DTS-HD, Master Audio
Transmit digital audio and video signals with zero signal loss
Data transfer speed of 6.75Gbps
EDID copy function for maximum compatibility.

Package Contents

(1) x Transmitter
(1) x Receiver
(1) x DC12V Power Adapter
(1) x User Manual

Specifications

Operating Temperature Range| -5° ~ 35°C | 23° ~ 95°F
---|---
Operating Humidity Range| 5 to 90% RH (No condensation
Input Video Signal| 0.5-1.0V P-P
Input DDC Signal| 5Vp-p (TTL)
Video Format Support| Up to 1080P
Video Output| HDMI | HDCP 1.4
Audio Format Support| DTS-HD Master Audio, Dolby True-HD etc.
Transmission Distance| 1080 8-bit 200ft. (Max) over single CAT5e/6 24AWG/Solid
Power Consumption| 5W (Max
Dimensions (L x W x H)| 83mm x 48mm x 25mm 3.27″ x 1.89″ x 0.98″
Net Weight| 250g | 0.55 (Pair)

Panel Information

Transmitter Panel

Status of signal connection
HDMI input
DID copy button
CAT-5E/6 output
Power input

Receiver Panel

Status of signal connection
HDMI output
Status of power input
CAT-5E/6 input
Power input

Connection and Operation

Connect the HDMI signal source to the transmitter’s HDMI input port
Connect an ethernet cable between the transmitter and the receivers ethernet ports (The cable must follow the standard of EIA-TIA 568B)
Connect an HD display to the HDMI output port of the receiver

Using EDID Copy Function

If you are experiencing issues with your HDMI extender and are not seeing an image on your display, it could be caused by an incompatibility between your source and the extender. However there is a very simple solution to this problem, and it lies within the EDID copy function of the JTDHDEX-1P

Follow these steps for EDID copy function:

First, connect the Transmitter of the extender to an HDMI input port on your TV, projector, monitor, or other display.
- Next, hold down the EDID copy button for about 5 seconds
- Once you have pressed the button long enough, make sure to turn the extender off so that the information can be saved onto the transmitter
Now, simply reconnect your transmitter back to your source and the extender will now pass the EDID information copied from your display!
- Note: You can also erase previously saved EDID information, in case you plan on using this extender on a different display. Follow this next step to erase the stored EDID information:
- Disconnect the HDMI cable from the transmitter, and hold down the EDID copy button for about 3-5 seconds (the red LED should flash for a few seconds then become static, or stop flashing). Once again, simply power down the transmitter and all of the previously saved EDID information will be gone from the extender.

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (1) Year”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.

During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God

There are no express warranties except as listed under “Limited Warranty Coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive but are for illustration only). Parts and service, which are not covered by this limited warranty, are your responsibility.

Scan the QR code below, or visit
https://resource.jtechdigital.com/products/183
to view and access detailed digital
resources regarding this unit.

WWW.JTECHDIGITAL.COM
PUBLISHED BY J-TECH DIGITAL INC

9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM