WATTS 289 Smart Steam Control User Manual
- June 14, 2024
- WATTS
Table of Contents
WATTS 289 Smart Steam Control User Manual
The Smart Steam Control 289, connected through the Watts® OnSite mobile/desktop app is a simple solution to manage all steam boilers across multiple properties. Connectivity to Watts OnSite significantly improves ease of job and reduces the number of staff hours visiting plant rooms. The Smart Steam Control 289 is designed to operate up to 2 steam boilers on either one or two pipe steam applications. The system can provide up to 30% energy savings through Outdoor Reset technology, Indoor Temperature Feedback, and warm weather shutoff.
Features
- Perfect for retrofits and New Builds
- 5 inch color touchscreen with Setup Wizard for simplified installation
- Operates up to 2 boilers
- Applications using a tankless DHW coil
- Product Compatible with Optional Flue Sensor 069 and Pressure Sensor 089 (products sold separately)
- CSA Approved for use in the USA and Canada
Watts® Onsite Features
- Remote access for maintenance and troubleshooting to reduce service calls for contractors and reduce time traveling to sites
- Real time alert and notifications through text, email, and push notifications
- Full transparency on maintenance and service with alert recognition and tracking
- Historical Charting Data to monitor system efficiency
Energy Saving Features
- Optimized system efficiency to reduce fuel consumption by up to 30%
- 4 Event, 7 Day Programable Schedule
- Outdoor Reset Technology
- Warm Weather Shut Down
- Indoor Temperature Feedback (with optional indoor sensor)
Specifications
Call customer service if you need assistance with technical details.
LEGEND
B1, B2 = Steam Boilers
D1 = Combustion Air Damper
P1 = Pressure Sensor 089
S1 = Outdoor Sensor 070
S2 = Condensate Return Sensor 071
V1 = Main Steam Vent
E1 = Ethernet Connection
tekmar is not responsible for failures due to connectivity issues, power outages, or improper installation.
NOTICE
The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product.
Concept Drawing: This is only a concept drawing, not an engineered drawing. It is not intended to describe a complete system, nor any particular system. It is up to the system designer to determine the necessary components for and configuration of the particular system being designed, including additional equipment, isolation relays (for loads greater than the control’s specified output ratings), and any safety devices which in the judgement of the designer are appropriate, in order to properly size, configure and design that system and to ensure compliance with building and safety code requirements.
Tel: 1-800-438-3903 • F:
250-984-0815
tekmarControls.com
© 2023 tekmar
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>