iHome iW30 Wireless Charger with Alarm Clock and Night Light Instruction Manual

iHome iW30 Wireless Charger with Alarm Clock and Night Light

Product Information

Features

• Fast wireless charging
• Alarm clock with preview and disarm function
• Adjustable alarm settings for hour, minute, and schedule
• Snooze function with adjustable duration
• Dimmable display with multiple brightness levels
• Nightlight with auto-dimming based on light environment
• Date and time setting with DST (Daylight Savings Time) support
• Battery backup compartment for low backup battery indicator
• Rear controls for USB-C and USB-A charging
• Wake to sound, light, or both
• Wireless charging for Qi-compatible devices

Usage Instructions

ALARM SET:

• Press the ALARM SET button to preview and arm/disarm the alarm.
• Press and hold the ALARM SET button to set the alarm.
• Use the +/- buttons to set the hour and press the ALARM SET button to confirm.
• Use the +/- buttons to set the minute and press the ALARM SET button to confirm.
• Use the +/- buttons to set the schedule (7 days, weekdays, weekends) and press the ALARM SET button to confirm. The alarm is set for 7 days until a date is set.
• If the alarm sounds, press the ALARM SET button to disable it and reset it for the next day.

SNOOZE/DIMMER:

• Press the SNOOZE/DIMMER button to snooze the alarm.
• Press and hold the SNOOZE/DIMMER button to adjust the snooze duration. Use the +/- buttons to adjust the duration (1-29 minutes) and press the SNOOZE/DIMMER button to confirm.
• Press and release the SNOOZE/DIMMER button to dim the display.
• It has multiple dimming levels: Aut1, Aut2, Aut0, Hi, 3, 2, Lo, and OFF.

NIGHTLIGHT:

• The display will automatically dim to match the light
  environment.

• Press and release the NIGHTLIGHT button to cycle through
  brightness levels: Hi, Med, Lo, or OFF.

• When the light is ON, press and hold the NIGHTLIGHT button to
  turn it OFF.

DATE SET/DST (DAYLIGHT SAVINGS):

• Press and hold the DATE SET/DST button to set the date.
• Use the +/- buttons to select the year and press the DATE SET/DST button to confirm.
• Use the +/- buttons to set the month and press the DATE SET/DST button to confirm.
• Use the +/- buttons to set the day and press the DATE SET/DST button to confirm.
• A short press will show the DST status on the display. A short press toggles between Auto and OFF.

TIME SET:

• Press and hold the TIME SET button to set the clock.
• Use the +/- buttons to select the 12/24 hour mode and press the TIME SET button to confirm.
• Use the +/- buttons to set the hour and press the TIME SET button to confirm. The PM Indicator will display for PM time (there is no AM Indicator).
• Use the +/- buttons to set the minute and press the TIME SET button to confirm.

WIRELESS CHARGING:

• Place a Qi-compatible device face-up on the charging rest.
• The LED Status Indicator will show the charging status:
  • Rapid blinking LED: The device is not charging (reposition the device).
  • Slow blinking LED: The device is charging.
  • Solid LED: The device is fully charged.
• Note: The LED may continue to blink slowly when iOS devices are fully charged.
• CAUTION: Remove the phone’s metal protective case before charging. Do not place magnetic or metal objects on the charger during charging. Qi-compatible phones with metallic-looking finishes will charge normally.

For questions and additional information, please scan the QR code or visit the iHome Help Center.

Important Safety Instructions:

Please heed all warnings, read and follow all instructions, and keep these instructions handy for future reference.

1. Do not use this product near water.
2. Unplug the unit and clean it only with a damp cloth. Stronger cleaning agents, such as Benzene, thinner, or similar materials can cause damage.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• Do not dispose of batteries in the household trash or fire.
• The mains plug of the power adaptor is used as the disconnect device; it shall remain readily operable.

OVERVIEW

ALARM SET

• Press to Preview and Arm/Disarm the Alarm
• Press & Hold to Set Alarm
• Use +/- to set the hour and press the alarm to confirm
• Use +/- to set the minute and press the alarm to confirm
• Use +/- to set the schedule (7 days, weekdays, weekends) and press the alarm to confirm (alarm is 7 days until a date is set; See Date Set below)
• When the alarm sounds, press the alarm to disable it and reset it for the next day

SET ( -/+ )

• Press to increase/decrease settings

SNOOZE/DIMMER

• Press to Snooze Alarm
• Press & Hold to Adjust Snooze Duration (adjust 1-29 min with +/- and press Snooze to confirm)
• Press and release to dim display: Aut1, Aut2, Aut0, Hi, 3, 2, Lo, and OFF

NIGHTLIGHT

• Press and release to cycle through brightness levels: Hi, Med, Lo, or OFF
• When the light is ON, press and hold to turn it OFF

DATE SET/DST (DAYLIGHT SAVINGS)

• Press & Hold to Set Date
• Use +/- to select the year and press the date set to confirm
• Use +/- to set the month and press date to confirm
• Use +/- to set the day and press date set to confirm
• A short press will show the DST status on display.
• Short press toggles Auto/OFF

TIME SET

• Press and hold to Set the Clock
• Use +/- to select 12/24 hour mode and press time set to confirm
• Use +/- to set the hour and press time set to confirm. PM Indicator will display for PM time. (There is no AM Indicator)
• Use +/- to set the minute and press time to confirm

WAKE TO SWITCH

• Use switch to wake to Sound/Light/Both (Light Alarm pulses ON/OFF every 10 sec)

WIRELESS CHARGING

Supports:

• Qi-compatible phones (also works with plastic cases up to 3mm thick)
• AirPods with wireless charging case
• Place Qi compatible device face-up on the charging rest. LED Status Indicator will show the charging status:
• Rapid blinking LED Device is not charging (reposition device)
• Slow blinking LED: The device is charging
• Solid LED Device is fully charged
• Note: The icon may continue to blink slowly when iOS devices are fully charged.
• CAUTION: Remove the phone’s metal protective case before charging. Do not place magnetic or metal objects on the charger during charging. Qi-compatible phones with metallic-looking finishes will charge normally

WARNING:

• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

• Please heed all warnings, read and follow all instructions, and keep these instructions handy for future reference.

1. Do not use this product near water.
2. Unplug the unit and clean it only with a damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
5. Only use attachments/accessories specified by the manufacturer.
6. Unplug this product during lightning storms or when unused for long periods of time.
7. Damage Requiring Service – This product should be serviced by qualified service personnel when:
   • The plug has been damaged.
   • Objects have fallen into or liquid has been spilled into the enclosure.
   • The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
   • The unit exhibits a marked change in performance or does not operate normally.
8. No naked flame sources, such as lighted candles, should be placed on this product.
9. Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com
10. This product is suitable for use in tropical and/or moderate climates.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• Do not dispose of batteries in the household trash or fire.
• The mains plug of the power adaptor is used as the disconnect device, it shall remain readily operable.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance of 20cm (8 inches) between the radiator & your body.

ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device complies with ISED RF exposure requirements, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For questions and additional information, please scan the QR code or visit: www.ihome.com/help/iW30 .

Documents / Resources

| iHome iW30 Wireless Charger with Alarm Clock and Night Light [pdf] Instruction Manual
iW30 Wireless Charger with Alarm Clock and Night Light, iW30, Wireless Charger with Alarm Clock and Night Light, Alarm Clock and Night Light, Night Light, Light
---|---

References

• call2recycle.com
• iHome: Support: POWERVALET PRO (iW30)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>