REGENCY ES165 Electric Fireplace Instruction Manual

REGENCY ES165 Electric Fireplace

Product Information

The product is a fireplace with a remote control for easy operation. The remote control is designed to be placed on a flat surface in the same room as the fireplace. It should be kept away from any direct flow of hot air to prevent damage.

Product Usage Instructions

• Power: Press the POWER button to turn on the fireplace and enter standby mode. This button controls all functions simultaneously and retains the settings in memory.
• Flame Effect Adjustment: Press the FLAME button to access the main flame effect adjustment screen. Use the ‘f’ and ‘g’ buttons to cycle through Red – Ember – Yellow – Off. Use the ‘+’ and ‘-‘ buttons to adjust the brightness from 10% to 100%, with five settings including Off.
• Fuel Bed Settings: Press the FUEL BED button to access the fuel bed settings. Use the ‘f’ and ‘g’ buttons to cycle through 14 color options. Use the ‘+’ and ‘-‘ buttons to adjust the brightness from 10% to 100%, with five settings including Off.
• Mood Light Settings: Press the MOOD LIGHT button to access the mood light settings. The settings will cycle through 14 color options and Off. Use the ‘+’ and ‘-‘ buttons to adjust the brightness from 10% to 100%, with six settings including Off.
• Heating: Press the HEATING button to cycle through the heat settings: AUT – LOW – HIGH – OFF. The AUTO heating will activate after setting the weekly timer on the remote control.
• Advanced Operation: Use the ‘f’ and ‘g’ buttons to choose different settings, such as color settings for corresponding functions. Use the ‘+’ and ‘-‘ buttons to increase or decrease settings, such as light settings.
• Turn On/Off:
  • Press the POWER button to turn on the flame effect.
  • Press the POWER button to turn off all functions in normal heating control mode.
  • Press the POWER button to turn off the flame effect in daily and weekly timer heating modes.

BUTTONS FUNCTION

• POWER The POWER button will turn the fireplace on, and enter standby mode.
  This will turn on/off all the functions at once but will hold the settings in memory.

• FLAME

  • Press the FLAME button to enter the main flame effect adjustment screen, press ‘f’ and ‘g’ button to cycle through Red – Ember – Yellow – Off.
  • Press ‘+’ and ‘-’ button to adjust the brightness from 10 -100%, total five settings including Off.
  • The remote control should be left on a flat surface in the room where the appliance is installed and away from any direct flow of hot air.

• FUEL BED

  • Press the button to enter the FUEL BED settings, press ‘f’ and ‘g’ button to cycle through 14
  • Colour options. Press ‘+’ and ‘-’ button to adjust the brightness from 10-100%, total five settings including Off.

• MOOD LIGHT

  • Press the button to enter the MOOD LIGHT settings, and the setting will cycle through 14
  • Colour options and Off.
  • Press ‘+’ and ‘-’ button to adjust the brightness from 10-100%, total six settings including Off.

• HEATING Press the HEATING button, and the heater will cycle the heat setting: AUT – LOW – HIGH – OFF. A The AUTO heating will work after the weekly timer has been set ion the remote

•  Press the ‘f’ and ‘g’ button to choose different settings such as the colour settings of the corresponding function.

•  Press the ‘+’ and ‘-’ button to increase or decrease the settings such as the light setting.

OPERATING THE APPLIANCE – ADVANCED OPERATION

REMOTE CONTROL

CONTROL PANEL

TURN ON/OFF

• Press **** button to turn on the flame effect.
• Press **** button to turn off all the functions under the normal heating control mode.
• Press **** button to turn off the flame effect under daily and week timer heating mode.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>