Blackview Tab 8 WIFI Full Tablet User Guide
- June 15, 2024
- Blackview
Table of Contents
Blackview Tab 8 WIFI Full Tablet
Product Information
The Tab 8 WiFi Series is a smart device that allows you to enjoy a smart life. It features a Type C port for connectivity. Please refer to the user manual for instructions in different languages.
How to Insert the TF Card
- Ensure the device is turned off.
- Locate the TF card slot on the device.
- Gently insert the TF card into the slot, making sure it is properly aligned.
- Push the TF card in until it clicks into place.
- Turn on the device and wait for it to recognize the TF card.
Safety Instructions
- The device should be kept at least 15 cm away from any medical implant or rhythm adjuster. It should not be placed in your coat pocket.
- Avoid exposing the device and other batteries to high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug it from the power outlet.
- If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or device.
- Use only approved and compatible power sources to avoid hazards. Do not disassemble or reset the battery, insert other objects, or immerse it in water or other liquids to prevent battery leakage.
- Avoid dropping, crushing, scratching, or puncturing the battery to prevent excessive external pressure that may result in internal short-circuit and overheating. The company is not responsible for accidents caused by non-standard charging equipment.
OVERVIEW
How to insert the TF card
How to boot
- Non-removable battery
- Press the power button for 3-5 seconds to boot
Language switching settings
- Main menu–settings-system setting – language and input method
- Language and input method–language–language adding
- Select the language you need, the system will automatically jump back to the language interface
- Select the icon after the language bar and drag it to the first one.
SAR
- The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg.
- In line with the requirements of the national standard GB 21288-2007.
Safety- In order to ensure safely using the product, you must strictly abide by the following rules
- The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
- Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
- Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
- If you want to read the full CE accompliance, please check this link: http://www.blackview.hk/ce/.
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
- Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, soft cloth.
- (Example: camera lens) and display.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting) It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
Specification
Function
| ****
Operation Frequency
| Max RF outputpower| ****
Limit
---|---|---|---
BT(BR+EDR)| 2402MHz–2480MHz| 4.84 dBm| 20 dBm.
BLE| 2402MHz–2480MHz| -0.93 dBm| 20 dBm.
WIFI 2.4G
| 802.11b/g/n(20MHz): 2412~2472MHz;
802.11n(40MHz):2422~2462MHz
| ****
16.3 dBm
| ****
20 dBm.
WIFI 5.2G
| 5180-5240MHz for 802.11a/n(HT20)/ac(VHT20);
5190-5230MHz for 802.11n(HT40)/ac(VHT40);
5210MHz for 802.11ac(VHT80)
| ****
10.95 dBm
| ****
23 dBm.
WIFI 5.8G
| 5745-5825 MHz for 802.11a/n(HT20)/ac(VHT20);
5755-5795 MHz for 802.11n(HT40)/ac(VHT40);
5775MHz for 802.11ac(VHT80)
| ****
10.54 dBm
| ****
13.98 dBm.
Warning
- Use careful with the earphone maybe possible excessive sound pressurefrom earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
- The product shall only be connected to a USB interface of version USB2.0.
- Adapter shall be installed near the equipment and shall be easily accessible.
- Operation temperature:-10~40ºC.
- The plug considered as disconnect device of adapter.
- The device complies with RF specifications when the device used at 5mm form your body(SAR limit 2.0 W/Kg for 10-g) and at 0mm form your Member(DAS limit 4.0 W/Kg for 10-g). for 10-g; Body SAR Value: 0.918W/Kg for 10-g; Member DAS Value:
- 1.441W/Kg for 10-g
- Model: QZ-01000EA00
- Input: 100-240V~50/60Hz 0.3A
- Output: 5.0V 2.0A (10.0W)
- Manufacturer: Guangdong Quanzhi Technology Co., Ltd.
Battery1: Rechargeable Li-ion Battery; Model: LiU28104142PVUTL_B; Specification: DC 3.8V, 6580mAh, 25.0Wh; Manufacturer: SHENZHEN UTILITY ENERGY CO., LTD. Battery2: Rechargeable Li-ion Battery; Model: Li28A4E1HTT; Specification: DC 3.8V, 6580mAh, 25.004Wh; Manufacturer: Shenzhen Hua TianTong Technology Co.,Ltd This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.
EU Declaration of Conformity
We,
- Shenzhen DOKE Electronic Co.,Ltd (801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China) hereby declares that this Tablet PC is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- According to Article 10(2) of Directive 2014/53/EU, the Tab 8 WiFi can be used in Europe without restriction.
- The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with theinstructions, may cause interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to which the receiver is connected.
- Contact with the provider or a radio f TV technician for help.
Specific absorption rate (SAR)
This Tablet meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The standards include a margin of safety designed to ensure the safety of all
people regardless of their age or health. The FCC Statement of Exposure to RF
and the SAR limit for the United States (FCC) is 1.6 W/kg average for each
gram of tissue. This device was tested for typical operations of use on the
body, with the back of the Tablet at 0mm from the body. To maintain compliance
with FCC RF exposure requirements, use accessories that maintain a distance of
0mm between the user’s body and the back of the Tablet . The use of belt
clips, covers and similar accessories must not contain metallic components in
their assembly. The use of accessories that do not meet these requirements may
not meet FCC RF exposure requirements and should be avoided. Functioning in
the body
This device was tested for typical operations of use in the body. To comply
with RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user’s body and the telephone, including the antenna.
Third-party accessories such as belt clips. covers and similar accessories
used with this device should not contain metallic components, accessories that
do not meet these RF exposure requirements and should be avoided from use on
the body. Use only the supplied antenna or an approved antenna.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Follow Blackview communtiy, a place where you can share and discuss with Blackview user keep posted with most up-to-day news.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>