DLS Cruise CRPP-2.6 Car Speaker User Manual

June 15, 2024
DLS

DLS Cruise logo CRPP-2.6 Car Speaker
User Manual

Cruise CRPP-2.6 Car Speaker

DLS Cruise CRPP 2 6 Car Speaker - feager

Welcome to DLS!
Thank you for buying a DLS Cruise CRPP-2.6. For us, it’s all about the sound experience. We care deeply about sound and construction quality. In order for your experience to be as optimal as possible, it is important that you fully read  this manual, preferably before you start your installation. Keep the manual in a safe and accessible place for future reference.
Your speakers must be installed correctly in order to work as intended. Make sure you have all necessary tools nearby before starting and that you are completely confident in how to process. If you feel the slightest uncertainty; feel free to take the help of an experienced installer or a car audio dealer.
Warranty
This component kit is covered by warranty, depending on the conditions in the country where it is sold. If the speaker is returned for service, please include the original dated receipt with the product.
General
Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same size as this kit, before you start the assembly
This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently and depending, if the tweeter is placed in the A-pillar or side mirror, the course of action may vary.
DECLARATION OF CONFORMITY
DLS plug and play speakers for vehicles are manufactured in accordance with the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval number. They are also marked in accordance with the WEEE-directive 2012/19/EC. The products are also produced in accordance with the EU RoHS directive 2015/863/EU.

Included products:
2pcs Woofers
2pcs Tweeters
2pcs Crossovers
Included accessories:
2pcs Tweeter connections
4pcs Adhesive foams for wrapping
4pcs Terminal crimp connectors
2pcs Four-leaf clover foams for tweeter
10pcs Blind rivets
1pc Rivet Tool
1pc PRY tool
1pc Manual

Pre installation

Disconnect Battery
Before you start the process of replacing speakers, disconnect and secure the negative terminal from your battery/power source. This will prevent the risk of damaging yourself or the products.
Place the disconnected terminal in a secure and isolated location away from any possible connection belonging to the battery/power source system.

General info

Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same size as this kit, before you start the assembly This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently and depending, if the tweeter is placed in the A-pillar or side mirror, the course of action may vary.
Be careful when removing the panels and lids, so there will be no marks. Use plastic PRY tools to avoid marks on the panels and destroy the plastic clips.

Installation

Start the dismount
Dismount the front door by removing the cover of the door panel.DLS Cruise
CRPP 2 6 Car Speaker - door panel

Usually the clips/screws are placed by the white marks. It may be different in your vehicle. DLS Cruise CRPP 2 6 Car Speaker - door
panel1In most cases the screws used are Torx T30. Unscrew them and store them in a safe position, to re-use when re-mounting the door panel.
Use a wrench, size 10. Normally the bolt is located at the underside of the door. Turn bolt 90 degrees.DLS Cruise CRPP 2 6 Car Speaker - door
panel2DLS Cruise CRPP 2 6 Car Speaker - door
panel3When the door panel is loose, start with softly lifting it straight up, to remove the panel.
There are several electric and mechanical connectors on the backside of the panel. Release the door lock cableDLS Cruise CRPP 2 6 Car Speaker - door
panel4

Disconnect the window control panel, cables for lights, speaker cable harness and any other connections.
Removing woofer

The door speakers are fixed with rivets.DLS Cruise CRPP 2 6 Car Speaker -
door panel5Use a 4mm drill to remove the rivets. Make sure all remains from the old rivets are removed from the inside of the door.DLS Cruise CRPP 2 6 Car Speaker - woofer

Just drill enough to remove the top of the rivets
Mounting DLS drivers
Place the new DLS driver in the hole for the speaker. Use the included rivets and the rivet tool to safely mount the driver. (Step 3 might be done several times)DLS Cruise CRPP 2 6 Car Speaker - woofer1

Connect the speaker harness.
Start the assembly of the door panel.
Reconnect all wires harness.
Connect all plugs to the door cover, reconnect the unlocking device, place the door cover from the top, by the window seal and push it gently down. Make sure the clips are in place and can engage. Give the door panel a push by the hand to attach to the clips. Mount and fasten all screws to the correct places.

Change Tweeter

Locate the tweeter – Either in the A-pillar, by the side mirror or in same case in the door by the handle.DLS Cruise CRPP 2 6 Car Speaker -
Tweeter

Dismount over and remove the covers. Use Plastic PRY tools and be careful, there can be air-bags behind the A-Pillar. The first clip can be really hard to remove. Take it easy and use minimal force.
(This shows how to unmount the A-pillar tweeter)DLS Cruise CRPP 2 6 Car
Speaker - Tweeter1

Un-clip the speaker connector from tweeter

DLS Cruise CRPP 2 6 Car Speaker - Tweeter2

Remove old tweeter
Use a cutting nipper or a Snap-off blade knife to remove the top of the plastic pin that holds the tweeter.
Don’t remove the whole pin, just the top!DLS Cruise CRPP 2 6 Car Speaker -
old tweeterChange the tweeter, and place it where the OEM tweeter used to be. Make sure that the DLS tweeter is properly fixed. Remove the protecting plastic sheet from the adhesive four-leaf clover and use it to hold the new tweeter in place. Make sure the tweeter is fixed in a safe way.

DLS Cruise CRPP 2 6 Car Speaker - old tweeter1

For some models, the four-leaf clover needs to be adapted. Use a sharp scissor to modify it.

Connect the crossover with the PnP connector. Use the other adhesive foam to secure the crossover and cablesDLS Cruise CRPP 2 6 Car Speaker -
crossover

The yellow cable loop is tweeter level select, enabling fine tuning of the high frequencies
Closed loop = -4dB (Shown in the picture)
Open loop = Normal
Finally
Start assembling the covers again to finish the work. Make sure that no screws or clips are left over, Reconnect the battery/power source terminal.
Finally, it´s time to play some good music and enjoy!

Running-in time

Allow the component kit to play for at least 15-20 hours in order to perform at its possibly best. This run-in can be made with tone sweep or with just music.
Start at a moderate volume and increase the volume step by step during the running in period. After the 15-20 hour run in session the performance and characteristics will be in the correct condition.

DLS Support
For technical assistance, ask your car audio dealer where the product was sold or the distributor in your country. You can always contact the DLS Helpdesk in Sweden at e-mail: info@dls.se Information can also be found on our WEB-site  www.dls.se We follow a policy of continuous advancement in development. For this reason, all or part of specifications & designs may be changed without prior notice.

Specifications

Art. no
Woofer
Tweeter
RMS Power MAX Power Impedance Sensitivity Freq. range Crossover Attenuation| CK-CRPP-2.6
6.5” /165mm with glass fiber cone
1” / 25mm silk dome tweeter with accessories
100W
200W
3 Ohm
90dB 1W/1M
55Hz-25kHz
4.8kHz 12dB/Oct with Mandora caps
Tweeter -4dB/0dB
---|---

Electro-Acoustic Parameters Tweeter:

Re 3.5 Ohm
Fs 1  1992Hz
SPL 94dB 1W/1M

DLS CRPP-2.6 Tweeter
Technical Specification

Size  1” /25mm
RMS Power 50W
MAX Power 100W
Voice Coil Material CCAW voice coil/ Aluminum former
Frame Glass Fiber Reinforced ABS
Magnet Neodymium/Copper shorting ring
Cone Natural silk dome
Impedance 4 Ohm
Freq. range 2000Hz-25kHz

DLS Cruise CRPP 2 6 Car Speaker - time1

DLS CRPP-2.6 Woofer
Technical Specification

Size 6.5” /165mm
RMS Power 100W
MAX Power 200W
Voice Coil Size 1” /25mm
Voice Coil Material CCAW voice coil/ Kapton former
Basket Glass Fiber Reinforced ABS
Magnet Ferrite/Copper shorting ring
Cone Glass Fiber
Suspension Rubber
Impedance 3 Ohm
Freq. range 55Hz-5kHz

DLS Cruise CRPP 2 6 Car Speaker - crossover1

Electro-Acoustic Parameters

Re 2.4 Ohm
Fs 68.4Hz
Mms 12.6g
Cms 0.427
Vas 11.6L
Ots 0.74
Oes 0.85
Oms 6.3
BI 3.96T.m
Spl 88.5dB 1W/1M
Sd 132cm2

DLS Cruise CRPP 2 6 Car Speaker - crossover2

Impedance VS Frequency

DLS Cruise CRPP 2 6 Car Speaker - Frequency

DLS Cruise CRPP-2.6 compatible car models

Car Model Year Front speaker Rear speaker

MAN
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SEAT
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
SKODA
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW
VW| TGE
ALTEA
ALTEA XL
ARONA
AROSA 1
ATECA
CORDOBA II
T IBIZA III
IBIZA IV
IBIZA V
LEON
LEON II
MII
TOLEDO II
TOLEDO III
TOLEDO IV
CITIGO
FABIA I 1
FABIA II
FABIA III
KAMIQ
KAROQ
KODIAQ
OCTAVIA II
OCTAVIA III
ROOMSTER
RAPID
SCALA
SUPERB
SUPERB
YETI
YETI II
SUPERB
ARETON
AMAROK
ATLAS
NEW
BEETLE
BEETLE
BORA
BORA
VARIANT
C-Trec
CADDY
CRAFTER II
EOS
GOLF IV
GOLF
GOLV VI
GOLF VII
GOLF VIII
ID 3
ID 4
JETTA
JETTA VII
LAVIDA
LAVIDA PLUS
LUPO
MAGOTAN
MAGOTAN
NIVUS
PASSAT
PASSAT
PASSAT
POLO IV
POLO V
POLO VI
NEW SANTANA
SCIROCCO
T6.1 MULTIVAN
TAREK
TAYRON
TERAMONT
THARU
TIGUAN
TOURAN
T-CROSS
T-ROC CAB
VW T-ROC
UP E-UP!
VENTO| 2017-2022
2004-2015
2004-2015
2018-2021
1997-2004
2016-2021
2002-2009
2001-2008
2008-2017
2018-2021
2000-2005
2006-2012
2012-2021
1994-2004
2004-2009
2012-2019
2012-2021
1999-2007
2007-2014
2015-2021
2019-2021
2018-2021
2017-2022
2004-2013
2013-2018
2006-2015
2012-2021
2019-2021
2008-2015
2016-2021
2009-2017
2018-2021
2016-2021
2017-2021
2010-2021
2010-2021
1997-2011
2011-2021
1998-2005
1999-2005
2016-2021
2020-2021
2017-2021
2006-2011
1997-2004
2004-2008
2008-2014
2012-2020
2020-2021
2020-
2021-
2005-2010
2015-2021
2008-2018
2018-2021
1998-2005
2013-2016
2017-2021
2020-2021
1996-2005
2005-2015
2015-2021
2001-2009
2009-2016
2017-2021
2012-2021
2008-2017
2020-2021
2018-2021
2019-2021
2018-2021
2018-2021
2007-2021
2003-2021
2019-2021
2020-2021
2017-2021
2011-2021
2010-2020| CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6
CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
0 CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

RPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6*

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

CRPP-2.6
CRPP-2.6

| CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CXCRPP-2.6CX
CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX*
CRPP-2.6CX**

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

CRPP-2.6CX
CRPP-2.6CX

Disclaimer

  • DLS CRPP-2.6 is not compatible if your vehicle is with the original Premium Hi-fi system/Nonaudio system/Fender Audio system, or sound system with 8” speakers.
    DLS Recommends CRPP-2.6CX as rear speaker. CRPP-2.6 kit may fit in rear doors if there is a tweeter location.
    Product markings**

The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
This product has been granted with the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
DLS products complies with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
DLS is a global partner of the European Mobile Media Association, an organization that focus on promoting the custom made mobile media installations to consumers.

We follow a policy of continuous advancement in development. For this reason all or part of specifications & designs may be changed without prior notice. We reserve for possible typos, factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories.

DLS Cruise logoDLS speakers are engineered by DLS Sweden, a part of:
Winn Scandinavia AB
Elementvägen 15 – SE-702 27 Orebro – Sweden
Tel: +46 19 20 67 65 – E-mail: info@dls.se
www.dls.se
Designed & Sound tuned in Sweden.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals