DLS Cruise CRPP-VO1.6CX Adapted Coaxial Speaker for Volvo User Manual
- June 9, 2024
- DLS
Table of Contents
CRPP-VO1.6CX Adapted Coaxial Speaker for Volvo
User Manual
CRPP-V01.6CX
User manual
VOLVO
Cruise CRPP-VO1.6CX Adapted Coaxial Speaker for Volvo
Welcome to DLS!
Thank you for buying a DLS Cruise CRPP-VO1.6CX. For us, it’s all about the
sound experience. We care deeply about sound and construction quality. In
order for your experience to be as optimal as possible, it is important that
you fully read this manual, preferably before you start your installation.
Keep the manual in a safe and accessible place for future reference.
Your speakers must be installed correctly in order to work as intended. Make
sure you have all necessary tools nearby before starting and that you are
completely confident in how to proceed. If you feel the slightest
uncertainty; feel free to take the help of an experienced installer or a car
audio dealer.
Warranty
This coaxial speaker is covered by warranty, depending on the conditions in
the country where it is sold. If the speaker is returned for service, please
include the original dated receipt with the product.
General
Some sound systems may vary in size of the door speaker. Make sure that your
vehicle has the same size as this coaxial speaker, before you start the
assembly
This is a generic mounting instruction. The approach is similar to all of the
described car models. Some screws and clips may be placed differently and
depending on your car model.
Declaration of conformity
DLS plug and play speakers for vehicles are manufactured in accordance with
the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval
number. They are also marked in accordance with the WEEE-directive
2012/19/EC. The products are also produced in accordance with the EU RoHS
directive 2015/863/EU.
DLS speakers are engineered by DLS Sweden, a part of:
Winn Scandinavia AB
Elementvägen 15 – SE-702 27 Örebro – Sweden
Tel: +46 19 20 67 65 – E-mail: [email protected]
www.dls.se
Designed & Sound tuned in Sweden.
Included products:
2pcs Coaxial speakers
Included in box:
4pcs Adhesive foams for wrapping
4pcs Terminal crimp connectors
8pcs Blind rivets
1pc Pry tool
1pc Manual
Pre installation
Disconnect Battery
Before you start the process of replacing speakers, disconnect and secure
the negative terminal from your battery/power source. This will prevent the
risk of damaging yourself or the products. Place the disconnected terminal in
a secure and isolated location away from any possible connection belonging to
the battery/power source system.
General info
Some sound systems may vary in size of the door speaker. Make sure that your
vehicle has the same size as this coaxial speaker, before you start the
assembly
This is a generic mounting instruction. The approach is similar to all of the
described car models. Some screws and clips may be placed differently and
depending on your car model.
The DLS CRPP-VO1.6CX can be installed instead of DLS CRPP-VO1.6 but the OEM
tweeter will in this case, still be connected. The sound improvement will not
be as good as with the CRPP-VO1.6
Installation
Dismount door panel
Dismount the front door by removing the cover of the door panel.
Hint: Use plastic PRY tools to avoid marks on the panels or damaging the
plastic clips.
If your door has a corner cover (1) or a tweeter cover (2), you need to remove
them first.
Corner cover is attached with 2 clips and the tweeter cover is usually
attached with 2 or 3 clips.
Remove the door lock knob before removing the door panel.
Remove the electric window panel and disconnect the plug on the back side of
the panel. Always use plastic PRY tools when removing panels and interior, to
avoid marks on
the panels and leather.
Depending on car model, the amount of screws and placement can vary. In most
cases the screws used are Torx T25.
Be careful when removing the door panels and lids. Use PRY tools.
Some newer models, don’t have plastic clips to hold the door in place. Just
remove the screws and gently press the door panel up. Be careful with the door
lock knob. Just move the panel straight up.
There are several electric and mechanical connectors on the backside of the
door panel. Release the door lock cable.
Disconnect all cables for lightning, speaker cable harness and any other connections.
Remove door speaker
The door speakers are either fixed with rivets or screws. Make sure you have
correct tools for each operation.
RIVETS
Use a 4mm drill to remove the
rivets. Make sure all remains from the old rivets are removed from the inside
of the door.
Just drill enough to remove the top of the rivets. Remember to disconnect the
speaker harness before unmounting the speaker.
SCREWS
Speakers fixed with screws. Make sure to use correct tools to unscrew. Save
the screws for reattachment.
Mounting door speakers
RIVETS (Mounting new speakers)
If the speakers were fixed with rivets. DLS recommends using a rivet tool to
fix the new DLS speakers. (Not included in CRPP-VO1.6CX)
Place the new DLS driver in the hole for the speaker. Use a rivet tool and
rivets to safely mount the driver. (Step 3 might be done several times)
SCREWS (Mounting new speakers)
If the speakers were fixed with screws. DLS recommends using the OEM screws to
fix the new DLS speakers. Use the correct screw bit.
Place the new DLS driver in the hole for the speaker and use the screws to fix
the speaker.
Connect the speaker harness. Start the assembly of the door panel. Reconnect all wires harness.
Connect all plugs to the door cover, reconnect the unlocking device, place the door cover from the top, by the window seal and push it gently down. Make sure the clips are in place and can engage. Give the door panel a push by the hand to attach to the clips. Mount and fasten all screws to the correct places. Remember to put the door locking knob back.
Finally
Start assembling the covers again to finish the work. Make sure that no screws
or clips are left over. Reconnect the battery/power source terminal. Finally,
it’s time to play some good music and enjoy!
Running-in time
Allow the coaxial speaker to play for at least 15-20 hours in order to perform
at its possibly best. This run-in can be made with tone sweep or with just
music.
Start at a moderate volume and increase the volume step by step during the
running in period. After the 15-20 hour run in session the performance and
characteristics will be in the correct condition.
DLS Support
For technical assistance, ask your car audio dealer where the product was sold
or the distributor in your country. You can always contact the DLS Helpdesk in
Sweden at e- mail: [email protected]. Information can also be
found on our WEB- site www.dls.se. We follow a policy of
continuous advancement in development. For this reason, all or part of the
specifications and designs may be changed without prior notice.
Specifications
Art. no
Woofer
Tweeter
RMS Power
MAX Power
Impedance
Sensitivity
Freq. range
Crossover| CK-CRPP-VO1.6CX
6.5” / 165 mm with glass fiber cone
1” / 25 mm silk dome tweeter with accessories
90 W
180 W
4 Ohm
90dB 1W / 1M
65 Hz – 25 kHz
4.8 kHz 6dB / Oct with Mandora caps
---|---
DLS Cruise CRPP-VO1.6CX Tweeter
Technical Specification:
Size
Voice Coil Material
Frame
Magnet
Cone| 1” / 25.4 mm
CCAW voice coil / Aluminium former
Glass Fiber Reinforced ABS
Neodymium / Copper shorting ring
Natural silk dome
---|---
DLS Cruise CRPP-VO1.6CX Woofer
Technical Specification
Size
Voice Coil Size
Voice Coil Material
Basket
Magnet
Cone
Suspension| 6.5” / 165 mm
1” / 25mm
CCAW voice coil / Kapton former
Glass Fiber Reinforced ABS
Ferrite
Glass Fiber
Rubber
---|---
Electro-Acoustic Parameters
Re
Fs
Mms
CMS
Vas
Qtrs.
Qis
MS
Lb
Spa
SD| 3.2 Ohm
70.8 Hz
10.7 gr
0.426
14.1L
0.92
1.05
7.0
4.37 Tam
87.1 dB 1W/1M
139 cm²
---|---
Impedance VS Frequency
DLS Cruise CRPP-VO1.6CX
The DLS coaxial speaker is developed to be installed in the back door of your
car. However, you can mount CRPP-VO1.6CX in the front door even if an OEM
component kit is installed in your car. The tweeter level will be different
due to the placement of the tweeter in the coaxial speaker and your OEM
tweeter will still be connected, by default to your stereo.
DLS Cruise CRPP-VO1.6CX compatible car models
Car
Volvo| Model
C30| Year
2007-2013| Front speaker CRPP- V01.6CX| Rear speaker CRPP- VO1.6CX
---|---|---|---|---
Volvo
Volvo
Volvo| S40
S80
S60| 2008-2012
2007-2017
2011-2017 ,| CRPP-V01.6CX”
CRPP-V01.6CX”
CRPP-V01.6CX| CRPP-VO1.6CX
CRPP-VO1.6CX
CRPP-VO1.6CX
Volvo Volvo Volvo Volvo Volvo| V70 V40 V50 V60 V60 XC| 2008-2016
2012-2016
2004-2012
2011-2017
2016-2017| CRPP-V01.6CX
CRPP-V01.6CX
CRPP-V01.6CX
CRPP-V01.6CX
CRPP-V01.6CX| CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-
VO1.6CX
Volvo
Volvo| XC70
XC60| 2008-2016
2009-2017| CRPP-V01.6CX
CRPP-V01.6CX*| CRPP-VO1.6CX
CRPP-VO1.6CX
*Disclaimer
The coaxial speaker can be placed in the front doors, but not optimal.
Product markings
The crossed-out wheelie bin symbol means that the product, literature and
packaging included must be taken to separate collection at the end of their
working life. Do not dispose of these products as unsorted municipal waste:
take them for recycling. For info on your nearest recycling point, check with
your local waste authority.
This product has been granted with the CE certification mark to show that the
product follows the health, safety, and environmental protection standards for
products sold within the European Economic Area (EEA).
DLS products complies with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
DLS is a global partner of the European Mobile Media Association, an
organization that focus on promoting the custom made mobile media
installations to consumers.
We follow a policy of continuous advancement in development. For this reason
all or part of specifications & designs may be changed without prior notice.
We reserve for possible typos, factual or numeric errors that may have been
printed on any products, package designs, user manuals and/or other included
accessories.