DLS CRUISE CRPP-2.6CX 2 Way Coaxial Speaker User Manual
- June 10, 2024
- DLS
Table of Contents
DLS CRUISE CRPP-2.6CX 2 Way Coaxial Speaker User Manual
Welcome to DLS!
Thank you for buying a DLS Cruise CRPP-2.6CX. For us, it’s all about the sound
experience. We care deeply about sound and construction quality. In order for
your experience to be as optimal as possible, it is important that you fully
read this manual, preferably before you start your installation. Keep the
manual in a safe and accessible place for future reference.
Your speakers must be installed correctly in order to work as intended. Make
sure you have all necessary tools nearby before starting and that you are
completely confident in how to proceed. If you feel the slightest uncertainty;
feel free to take the help of an experienced installer or a car audio dealer.
Warranty
This coaxial speaker is covered by warranty, depending on
the conditions in the country where it is sold. If the speaker
is returned for service, please include the original dated
receipt with the product.
Declaration of conformity
DLS plug and play speakers for vehicles are manufactured in accordance with
the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval
number. They are also marked in accordance with the WEEE-directive 2012/19/EC.
The products are also produced in accordance with the EU RoHS directive
2015/863/EU.
DLS speakers are engineered by DLS Sweden, a part of:
Winn Scandinavia AB Elementvägen 15 – SE-702 27 Örebro – Sweden
Tel: +46 19 20 67 65 – E-mail: info@dls.se
www.dls.se
Designed & Sound tuned in Sweden.
Included products: 2pcs Coaxial speakers
Included in box: 4pcs Adhesive foams for wrapping 4pcs Terminal crimp
connectors 10pcs Blind rivets 1pc PRY Tool 1pc Manual
Pre installation
Disconnect Battery
Before you start the process of replacing speakers, disconnect and secure the
negative terminal from your battery/power source. This will prevent the risk
of damaging yourself or the products. Place the disconnected terminal in a
secure and isolated location away from any possible connection belonging to
the battery/power source system.
General info
Some sound systems may vary in size of the door speaker. Make sure that your
vehicle has the same size as this coaxial speaker, before you start the
assembly.
This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently and depending on your car model.
The DLS CRPP-2.6CX can be installed instead of DLS CRPP-2.6 but the OEM tweeter will in this case, still be connected.
Dismount door panel
Dismount the door by removing the cover of the door panel.
Hint: Use plastic PRY tools to avoid marks on the panels and destroy the plastic clips.
Usually the clips/screws are placed by the white rings. It may be different in your vehicle.
In most cases the screws used are Torx T30. Unscrew them and store them in a safe place, to re-use when re-mounting the door panel.
Use a wrench, size 10. Normally the bolt is located at the underside of the door. Turn bolt 90 degrees.
Be careful when removing the panels and lids, so there will be no marks.
When the door panel is loose, start with softly lifting it straight up, to remove the panel.
There are several electric and mechanical connectors on the backside of the panel. Release the door lock cable.
Disconnect the window control panel, cables for lights, speaker cable harness and any other connections.
Remove door speaker
The door speakers are fixed with rivets.
Use a 4mm drill to remove the rivets. Make sure all remains from the old rivets are removed from the inside of the door.
Just drill enough to remove the top of the rivets.
Mount door speakers
Place the new DLS driver in the hole for the speaker. DLS recommends using a rivet tool (not included in CRPP-2.6CX) and rivets to safely mount the driver. (Step 3 might be done several times)
Connect the speaker harness
Start the assembly of the door panel. Reconnect all wires harness. Connect all
plugs to the door cover, reconnect the unlocking device, place the door cover
from the top, by the window seal and push it gently down. Make sure the clips
are in place and can engage. Give the door panel a push by the hand to attach
to the clips. Mount and fasten all screws to the correct places.
Finally
Start assembling the covers again to finish the work. Make sure that no screws or clips are left over, reconnect the battery/power source terminal. Finally, it’s time to play some good music and enjoy!
Running-in time
Allow the coaxial speaker to play for at least 15-20 hours in order to perform at its possibly best. This run-in can be made with tone sweep or with just music. Start at a moderate volume and increase the volume step by step during the running in period. After the 15-20 hour run in session the performance and characteristics will be in the correct condition.
DLS Support
For technical assistance, ask your car audio dealer where the product was sold
or the distributor in your country. You can always contact the DLS Helpdesk in
Sweden at e-mail: info@dls.se. Information can also be found on our WEBsite
www.dls.se. We follow a policy of continuous advancement in development. For
this reason, all or part of the specifications and designs may be changed
without prior notice.
Specifications
DLS Cruise CRPP-2.6CX
The DLS coaxial speaker is developed to be installed in the back door of your
car. However, you can install it as a front speaker in your system even if an
OEM component kit is installed in your car. The tweeter level will be
different due to the placement of the tweeter in the coaxial speaker and your
OEM tweeter will still be connected, by default to your stereo.
DLS Cruise CRPP-2.6CX compatible car models
Product markings
We follow a
policy of continuous advancement in development. For this reason all or part
of specifications & designs may be changed without prior notice. We reserve
for possible typos,
factual or numeric errors that may have been printed on any products, package
designs, user manuals and/or other included accessories.