Wagner Spraytech C900054 AutoRight Multi Purpose Steam Cleaner User Guide
- June 15, 2024
- Wagner Spraytech
Table of Contents
Wagner Spraytech C900054 AutoRight Multi Purpose Steam Cleaner
QUICK START REFERENCE GUIDE
This is only a quick reference. Read the entire instruction manual prior to
using the product.
Read all warnings and safety instructions in the instruction manual before
use.
-
Unscrew the safety cap by turning counter clockwise.
Fill the tank using the funnel provided.
-
The tank holds up to 40 oz. /1200ml of water. DO NOT overfill the water tank or damage to the product may occur.
Only use distilled water, mineral build-up from tap water can shorten the life of the steamer. -
Once full replace the safety cap by turning clockwise, fasten tightly
-
Attach the necessary cleaning adaptor and accessory to the steam gun nozzle.
-
Plug the machine into the outlet and press the ON/OFF button to ON.
-
The Red power light and Orange steam light, indicating that the machine is building steam, should both illuminate
-
Allow approximately 9 minutes for the machine to build up steam pressure.
-
Once the orange steam pressure light turns off, the machine is ready to use.
FILLING THE WATER TANK
NEVER fill the tank while the machine is plugged in.
-
Unscrew the safety cap.
-
Fill the tank using the funnel provided. The tank holds up to 40 oz. /1200ml of water DO NOT overfill the water tank.
-
Fasten the safety cap tightly into place.
WATER USAGE AND STEAM TIME GUIDELINES
| AMOUNT OF WATER | DURATION OF STEAM |
|---|---|
| 13 oz. / 400ml | Approximately 15 min. |
| 26 oz. / 800ml | Approximately 30 min. |
| 40 oz. / 1200ml | Approximately 40 min. |
REFILLING THE WATER TANK
If the unit has been in use, ALWAYS follow these safety precautions before removing the water tank safety cap:
- Switch the unit to the OFF position and unplug the unit. Allow at least 30 minutes for the unit to cool.
- Release all the steam pressure in the unit by pressing the steam nozzle flow trigger (the red safety switch must be in the ON position).
Failure to follow these precautions may result in burns from escaping steam
when the water tank safety cap is removed.
Safety Cap will rotate but will not unscrew until unit is cool and pressure is
released.
For household use
only. Do not overfill reservoir as it may cause damage to the unit. Allow a 30
minute cool down period before refilling the reservoir.
STEAM GUN OPERATION
-
The steam output is controlled through the steam handle. The handle has both a steam trigger and red safety switch.
For intermittent steam generation press the red safety switch to the ON position. Pull the trigger to release steam.
-
For continuous steam generation:
(A) Start by pressing the red safety switch to the ON position, pull the trigger and then press the safety switch to LOCK. The trigger is now locked into continuous steam mode.
(B) To unlock from continuous steam mode, release the trigger and press the red safety switch back to the ON position.
REBUILDING STEAM PRESSURE WHILE IN USE
- If the orange steam light comes on during use, it indicates the machine needs to re-build pressure in the tank. The machine may still be used while pressure rebuilds.
HOT STEAM AND PARTS.
May cause injury, including skin burns or property damage. Temperatures exceed
212˚ F (100˚ C).
Burns can occur from hot water or steam.
DO NOT touch the steam nozzle or attempt to connect accessories while
unit is in use.
NEVER direct the steam at a person, pet or electrical device.