AMEWi MB-339 AMXFlight 820mm EDF Jet PNP Instruction Manual
- June 15, 2024
- AMEWi
Table of Contents
AMEWi MB-339 AMXFlight 820mm EDF Jet PNP
Product Information
The product is the MB-339 50MM EDF model by AMEWI. It is a remote-controlled aircraft designed for enthusiasts. The model is manufactured by AMEWI Trade GmbH and complies with safety standards and requirements. It requires an 11.1V 1300-1500mAh Li-Po battery (not included) for operation. The model features a motor that can get very hot during use, so it is important to allow it to cool for 10-15 minutes before touching it to avoid burn injuries. The model is not suitable for children under 14 years of age due to small parts.
Product Usage Instructions
- Read the instruction manual carefully before using the product.
- Ensure that you have an 11.1V 1300-1500mAh Li-Po battery for the model.
- Keep your fingers away from the drive parts and other moving parts to avoid injury.
- Allow the motor to cool for 10-15 minutes after use before touching it.
- Do not disassemble or modify the model in any way.
- Use the product safely and responsibly, avoiding improper or illegal use.
- Do not operate the model in a manner that could endanger others or yourself.
- If you want to attach the optional tip tanks, cut 5mm away from the ailerons on the outside left and right wings and glue the tanks to the wings. Ensure that the ailerons can move freely.
Instruction
Welcome to AMEWI
The Amewi Trade GmbH is an international import- and wholesale company for R/C
models, toys and creative items, located in Borchen near Paderborn, Germany.
Our product range includes over 10,000 items. Above all, this includes remote-
controlled car, helicopter, boat, and tank models as well as a wide range of
accessories and all necessary spare parts. Our sales network includes over 700
specialist dealer and online retailers across Europe.
The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer. Please always contact your dealer in warranty cases.
This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU {RED). The declarations and documents are stored at the manufacturer and can be requested and applied there. https://amewi.com/Konformitaetserklaerungen For additional questions to the product and conformity please contact: Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.
SECURITY AND HAZARD WARNINGS
For damage, caused by disregarding of the manual, warranty expires.
We are not liable for secondary failures, material, or personal damage, caused
by in proper usage or disregarding the security notices.
Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
Small parts. Danger of suffocation or risk of injury caused by small parts. Suitable for people aged 14+!
The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop down from a small height can cause damage to the product.
BATTERY NOTICE & DISPOSAL
Attention! Battery do not belong in the hands of children. A change of the battery must be done by an adult person. Never mix rechargeable batteries with non-rechargeable batteries. Never mix fully charged batteries with almost empty batteries. Never mix batteries of different capacities. Never try to charge dry batteries. Take care of the correct polarity. Defective batteries belong to special waste. Never leave a charging battery unattended. For questions about the charging time please read the manual or ask the manufacturer. Read the safety instructions and warnings before using or charging the Li-Ion battery.
Stop using or charging it immediately if it leaks, has a temperature above 70° C or anything else unusual occurs.
Use only a qualified and specific Li-Po/Li-Ion charger. Never charge the
battery unattended. Do not charge the battery if the charge exceeds 4.2 V /
cell. Do not charge the battery with a charging current above 2C. Please check
and ensure that you are using a qualified charger. An unqualified charger may
cause a fire.
Do not discharge the battery with a current exceeding the maximum discharge
current. Otherwise, this will cause the battery to overheat. This may result
in bursting, fire or explosion.
- Never disassemble, puncture, knock, drop, short circuit and/or throw the battery into a fire.
- Improper use such as short-circuiting, or overcharging may result in explosion or fire.
- Keep the battery in a safe place that babies or children cannot reach.
- The above indicates the danger of using the battery. The user assumes full responsibility for the outcome of using the battery.
DISPOSAL
AMEWI is registered below the Bat-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronical products are not allowed to put in household garbage. Please dispose the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden
Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.
Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).
Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.
Batteries labelled with the recycling symbol can be put into used battery
collecting tank.
(Most supermarkets have) They are not allowed to be put into local household
garbage.
AMEWI Trade GmbH is involved in the dual system for boxing over the company
Landbell AG.
All used boxes are collected from partner companies (waste disposal
contractor) at private customers (local household), sorted and properly
utilized. The involvement in a Dual Systems helps to save C02 Emissions.
THANK YOU
Thank you for purchasing the Amewi AMX Flight MB-339. Please read the instruction manual carefully and keep it for future reference
WARNING
- This remote-controlled model is not a toy.
- It consists of many small parts and is not suitable for children under 14 years.
- A 11,1V 1300-1500mAh Li-Po battery is required for the model (not included). Always keep your fingers away from the drive parts and other moving parts to avoid injury.
- The model’s motor gets very hot.
- To avoid burn injuries, allow the motor to cool for 10-15 minutes after use before touching it.
ON INAPPROPRIATE USE OF THE PRODUCT
Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.
PRECAUTIONS
Please read the following safety information before using the model. Please do not use the model in rain, snow, or thunderstorms. If liquid enters the electronics, they may be irreparably damaged. Please do not use the model in an environment that you cannot see. Signal interference can cause the model to go out of control. Please do not use the model in the following places
Near a radio tower, mobile phone masts or other places with active radio waves.
Near crowds or in public places.
Near rivers, ponds or lakes.
Near electricity pylons or other transmission towers.
Please do not operate the model if you are tired or unwell, have drunk alcohol or taken drugs – this may cause injury to yourself or others. To avoid burns, never touch drive parts and motors during or immediately after use as they can be very hot. Incorrect operation of the transmitter can cause injury to you or others. Be sure to familiarize yourself with the operation before using the model. Check the model and the remote control before use.
Check screws to make sure they are tight. When you have finished using the model, always switch off the model first and then the remote control. Otherwise, the model may get out of control. If the model gets out of range, it may get out of control. Please always stay close to the model with the transmitter.
IMPORTANT NOTES
-
Be sure to read thoroughly the manual before you begin.
-
As the product contains small parts, keep it away from small children
-
Never reverse connection / disassemble the battery.
-
Do not operate the model on public roads or crowded places.
SPECIFICATIONS
| Artikel / Item | Enthalten | Included | |
|---|---|---|---|
| Motor | 2627 4900KV | Ja | Yes |
| ESC | Hobbywing Skywalker 40A | Ja | Yes |
| Servo | 3x 9g digital | Ja | Yes |
| Empfänger / Receiver | 2,4GHz | Nein | No |
| Akku / Battery | 3S 1300-1500mAh | Nein | No |
| Fernsteuerung / Transmitter | 6-Kanal 2,4GHz | Nein | No |
PREPERATION OF MAIN WING PANEL
Apply glue to the recess for the servos and insert the servo into the hole. Mount the rudder horns with the screws.
If you want to attach the optional tip tanks, cut 5mm away from the ailerons on the outside left & right and glue the tanks to the wings. The ailerons must be able to move freely.
INSTALLATION OF MAIN WING PANEL
Adjusting the clevis – Turn the clevis
- (A) clockwise or anticlockwise on the linkage. Carefully spread the clevis and insert the clevis pin
- (B) into a selected hole in the control horn
- (C). Connect the push rod to the servo arm and the control horns. Glue the servo cover over the push rod.
- Apply glue to the tailplane and rudder and glue them to the fuselage.
- Screw the control horns to the tailplane.
- Connect the pushrod to the servo arm and the control horns.
- After gluing the main wing and the tailplane, make sure that the main wing and the tailplane are in line.
- Apply glue to the position of the elevator servo.
- Then glue the servo in place.
- Connect the adapter to the servo arm and screw it to the servo.
- Connect the ESC and the motor, make sure the motor works properly, then glue the ESC in place.
- Route the ESC cable in the canopy.
INSTRUCTION MANUAL
ASSEMBLY THE RECEIVER
CENTER OF GRAVITY 
FIRST FLIGHT
- For the first flight, wait for a calm day with only a light breeze.
- A good place is a large open field, away from trees, fences, power lines and other potentially dangerous obstacles
- Carry out a full check of the systems.
- All control surfaces respond correctly. Appropriate throttle response and battery voltage.
- Perform a range test if not already done.
- We recommend that you ask an experienced modeller to help you hand launch the model.
- Launch the aircraft with the fuselage and wings into the wind. Initially let the MIG-17 fly straight and level; do not attempt to turn it when it is close to the ground.
- Adjust the trims as necessary to transition the model into a steady climb. Check the model’s response to the transmitter’s control commands. You may need to increase or decrease control surface travel when the model is back on the ground.
- Bring the aircraft to a safe altitude and check the stall speed. Keep the speed much higher on the approach to avoid a stall. If you had to adjust the trim in flight, correct the mechanical linkages before flying again. This will allow you to re-centre the trims so that full trim travel is available for subsequent flights.
References
- Ferngesteuerte Fahrzeuge, Boote, Flugzeuge, Hubschrauber und Panzer - amewi.com
- Ferngesteuerte Fahrzeuge, Boote, Flugzeuge, Hubschrauber und Panzer - amewi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>