amped wireless APA20 High Power 700mW Dual Band AC Wi-Fi Access Point Installation Guide

SETUP GUIDE
Need Help? Give us a call.
Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support
READ FIRST

High Power 700mW Dual Band AC Wi-Fi Access Point

1. Attach the Antennas to their Specific Connectors on the Access Point Attach the three included Antennas to their corresponding numbers:
   a Antenna 1 (5.0GHz only) to Antenna Port 1
   b Antenna 2 (2.4 and 5.0GHz) to Antenna Port 2
   c Antenna 3 (2.4GHz only) to Antenna Port 3

2. Connect the Access Point to your Router/Network a Plug in the Power Adapter
   b Connect the Access Point to your Router’s Network (LAN) port, or a network switch Network
   Allow up to three (3) minutes for the Access Point to automatically configure itself to your network

3. Connect your Computer to the Access Point
   

Wireless Connections:
Scan for available wireless networks on your PC or tablet and connect to one of the following networks:

Wired Connections:
Attach any Wired Devices to the Access Point using an Ethernet cable.

Congratulations, you’re done!

The instructions below are optional. You may now use your Access Point without any additional configurations. However, if you wish to change any settings (such as network ID and security) for the Access Point, follow the instructions below to access the configuration menu of the Access Point.

Note: If your network uses static IP address assignments, you will need to manually configure the settings for your Access Point. See the instructions on the back to access the configuration menu of the Access Point.

1. Optional Configurations: Accessing the Dashboard / Web Menu
   Connect to the Access Point using a network cable or scan for available wireless networks on your PC or tablet and connect to:

2. Open your Web Browser Enter the setup web address into your browser: http://setup.ampedwireless.com
   If the URL fails to open try: http://192.168.80.240
   Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.
   ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS. THE MENU IS SERVED FROM THE ACCESS POINT.

3. Welcome to the Dashboard The Dashboard provides you with a quick glance at your system status.
   Click on Basic Setup to configure:
   1. System Clock
   2. Wireless Network SSID
   3. Wireless Network Security Key

4. Set the System Clock Time The System Clock is used for system logs and setting schedules for Internet access.
   Click Sync to synchronize the System Clock with the time on your computer.
   Click Next to continue.

5. Configure your Wireless Settings**** The Access Point creates two Wi-Fi networks:
   a 2.4GHz Wi-Fi network and a 5.0GHz Wi-Fi network.
   The IDs of your Wi-Fi networks are:
   Amped_APA20_2.4 and Amped_APA20_5.0
   To change them, enter a new name in the SSID field.
   Users connecting wirelessly to the Access Point will use this ID to identify your Wi-Fi network.
   The default Security Key (WPA/WPA2 Mixed Mode) for both (2.4GHz and 5.0GHz) networks is: wireless
   To change it, enter a new key in the Security Key field. The key must be at least 8 characters long.
   Click Next to apply your settings. The Access Point will reboot.
   The web menu will now apply your settings.
   This process may take up to 90 seconds.
   Do not refresh the web page. The page will automatically reload with the summary.
   If you are connected wirelessly to the Access Point, you will need to reconnect after the Access Point reboots.

6. Setup Summary The Setup Summary provides you with information regarding your current settings.
   If you have additional wired or wireless devices you may connect them at this time.
   If you experience any problems during this process, please contact Amped Wireless Elite Support:
   Phone: 888-573-8820
   Email: techsupport@ampedwireless.com
   Web: www.ampedwireless.com/support

This is the second page of the Setup Guide. Start on the opposite side first.

LED Indicator Information

How to Connect Wirelessly to the Access Point

Windows 7 and Vista
Click on the Wireless icon to see available wireless networks (For Vista, click Start > Connect To). Select Amped_APA20_2.4″ or “Amped_APA20_5.0” network and click Connect. When prompted for a password, enter “wireless”.

Mac OS X
Click on the Wireless icon to see available wireless networks. Select “Amped_APA20_2.4” or “Amped_APA20_5.0” network. When prompted for a password, enter “wireless”.

iPad Tablet
A. Tap the “Home” button to get to the home page.
B. Tap the “Settings” app icon.
C. Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.
D. Toggle the Wi-Fi “On/Off” selector switch to “On”
E. Under “Choose a Network,” select: “Amped_APA20_2.4” or “Amped_APA20_5.0”
F. When prompted, enter the wireless security key: “wireless”

Android Tablet
A. Tap the “Apps” menu on the tablet screen.
B. Locate and tap the “Settings” app icon.
C. Under “Wireless & networks,” tap “Wi-Fi settings”
D. Tap the Wi-Fi box to turn on Wi-Fi and scan.
E. Under “Wi-Fi networks,” select: “Amped_APA20_2.4” or “Amped_APA20_5.0”
F. When prompted, enter the Password key: “wireless”

Windows 8
Swipe in from the right edge to access the charms bar, tap on Settings, select the Wi-Fi icon, and select “Amped_APA20_2.4” or “Amped_APA20_5.0”. When prompted for a password, enter “wireless”.

iPhone
Tap on your Settings icon, select Wi-Fi, and choose the network, “Amped_APA20_2.4” or “Amped_APA20_5.0”. When prompted for a password, enter “wireless”.

Wi-Fi Protected Setup (One-Touch Setup or Push Button Configuration)
If your Wi-Fi device has WPS one-touch setup, you can use it to connect to the Access Point:

A: Hold down the WPS button on the Access Point (back panel) for 3 seconds.
The Power LED will begin to blink.
B: As it blinks, push the WPS button on your wireless adapter or enable WPS with the provided software for your wireless adapter. WPS will automatically configure the connection settings for your wireless adapter to connect to the Access Point.

Using the Features on the Access Point

The Access Point is equipped with many powerful security features which can be accessed through the web menu:

If you are unfamiliar or want more information on how to set up features, please refer to the User’s Manual on the included CD.

Setting a Static/Manual IP for your Access Point

If your network uses Static IP settings, you will need to set a static IP address for your Access Point. To do this, access the More Settings > Network Settings menu from the navigation menu and select Disabled / Static IP from the DHCP drop down menu.
Text enter the IP information as it relates to your network. Click Apply and reboot when you are done.
Note: Accessing the web menu from http://setup.ampedwireless.com will no longer work when using a Static IP.
You will only be able to access the menu using the Static IP address assigned to the Access Point.

How to Share USB Storage Devices

1. Connect a USB storage device to the USB port on the back panel.
2. Log onto the web menu at http://setup.ampedwireless.com and click the USB Storage tab.
3. Follow the instructions for configuring the settings to share the USB storage device.

How to Reset the Access Point to Default Settings

There are two options to reset the Access Point back to factory default settings:

1. Access the Reset button through the web menu on the left side under More Settings > Management > Save/Reload Settings. Select Reset Settings to Default.
2. Access the physical Reset button on the back panel of the Access Point:
   Hold down the Reset button for five to ten (5-10) seconds. You may need to use a pen tip or pin to access the button. Pressing the Reset button for less than five (5) seconds will simply reboot the Access Point while saving your existing settings.

Using the Included Desktop Stand and Cable Organizer

1. Check that all your cables are connected to the Access Point and locate the Desktop Stand.
2. Tuck the cables to the bottom of the Access Point and slide them through the hole on the Stand.
3. Attach and fasten the Desktop Stand to lock the cables in place.

Troubleshooting Tips

PROBLEM:
I entered setup.ampedwireless.com and it failed to open the web menu.

SOLUTIONS:
a. Make sure your computer is connected to the Access Point wirelessly and NOT using a network cable. Ensure the power is plugged in and on. Try to access the setup menu again.
b. Enter the following web address into your web browser instead of ‘setup.ampedwireless.com’: http://192.168.80.240
c. Power off (unplug the power adapter) the Access Point and power it back on. Try again.
d. Reset your Access Point to default settings by holding the Reset button (located on the back panel) for ten (10) seconds and try again.
e. If you are using a Static IP, you will need to enter the assigned IP address into the web browser to access the web menu. When using a Static IP, the setup.ampedwireless.com shortcut will no longer work.

PROBLEM:
I do not have Internet access when connecting to the Access Point.

SOLUTIONS:
a. Your router or original network may not have Internet access. First check to see if you are able to access the Internet by connecting directly with your router. If you cannot, there is a problem with your router that needs to be fixed first. If you are able to access the Internet, continue with the following troubleshooting options below.
b. Your router may be using Static IP assignments. If so, you will need to configure a Static IP for the Access Point.
Connect your PC to the Access Point using an Ethernet cable. Disconnect your PC from any wireless networks that it may be connected to. Access the web menu at setup.ampedwireless.com using a web browser. Access the IP settings menu from the left hand navigation bar. Select ‘Disabled’ under the DHCP dropdown menu and enter an
IP address that matches your router’s IP settings.

PROBLEM:
My Access Point was working fine previously, but now I can no longer access the Internet through the Access Point.

SOLUTIONS :
a. The settings on your router’s network may have changed or you may have lost Internet connection on your home router. Any changes to the DHCP settings of your home router may affect the Internet connection of the Access Point. Check the settings on your router and try again.
b. Reboot the Access Point by unplugging the power adapter and plugging it back in. Allow up to 3 minutes for the Access Point to reconfigure itself to your network. Check to see if your connection has been reestablished by viewing a website.

If you continue to have issues setting up the Access Point, give us a call — we’re here to help: 888-573-8820
Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support

Amped Wireless
A Division of Newo Corporation
Copyright © 2013 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.

v090513

Documents / Resources

| amped wireless APA20 High Power 700mW Dual Band AC Wi-Fi Access Point [pdf] Installation Guide
APA20 High Power 700mW Dual Band AC Wi-Fi Access Point, APA20, High Power 700mW Dual Band AC Wi-Fi Access Point, 700mW Dual Band AC Wi-Fi Access Point, Band AC Wi-Fi Access Point, Wi-Fi Access Point, Access Point, Point
---|---

References

• Manual-Hub.com - Free PDF manuals!
• ampedwireless.com/support
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>