iHome iHRVS2-3BLK AutoVac Eclipse Pro Robot Vacuum Owner’s Manual

**iHome iHRVS2-3BLK AutoVac Eclipse Pro Robot Vacuum Owner’s Manual

**

SAFETY

SAFETY DEFINITIONS

WARNING: Indicates a hazardous situation that, if not avoided, could result in death o serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage.

Before using this product, please read the following safety instructions and follow all safety precautions. Any operation inconsistent with this instruction manual may cause damage to this product.

WARNING:

• Your robot is not a toy. Small children and pets should be supervised when your robot is operating.
• Do not sit or stand on your robot.
• Do not use unauthorized chargers. Use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire or explode. Contact customer service for a replacement charger. Do not open your robot except as instructed to install or replace the battery or maintain the dustbin and filter(s). Do not open the charging dock as there are no user serviceable parts inside.
• Risk of electric shock. Only use indoors and in dry locations.
• Do not handle your robot with wet hands.
• Store and operate your robot in room temperature environments only.
• Do not operate the robot in areas with exposed electrical outlets in the floor.
• Do not attempt to open, crush or heat the battery of your robot above 175°F. Do not subject the battery to mechanical shock. Do not short circuit the battery of your robot by allowing any metal objects to contact the battery terminal Do not immerse the battery in liquid,
• Do not attempt to charge damaged or leaking battery packs. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery acid
  away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact with leaked battery acid. If a chemical burn oceurs or if irritation persists, seek medical attention.Dispose according to Local, State or Federal regulations.

CAUTION:

• If the robot passes over a power cord there is a chance an object can be pulled off a table. Before using the robot, clear the floor of objects such as clothing, cords for blinds and curtains. Power cords and any fragile objects which can be easily damaged.
• Do not use the robot to pick up sharp objects, or anything that is burning or smoking.

NOTICE

• This robot is intended for dry floor use only. Do not use the robot to pick up any wet spills and do not allow the dustbin contents to become wet.
• Do not place anything on top of your robot.
• Regularly wipe charge contacts on your robot and charge dock. Failure to maintain charge contacts could impact the robots ability to properly charge.
• Product may not be used with any type of power converter. Use of power converters will void the warranty.
• The battery pack must be removed from the robot before recycling or disposal.
• Do not use non-rechargeable batteries in your robot. For battery replacement contact customer care.
• Before long term storage of your robot, fully charge and remove the battery.

IN THE BOX

1. Charging Dock
2. Auto Vac Nova S2
3. Charging Adapter
4. Side brush
5. HEPA Filter (installed)
6. Cleaning Tool
7. Remote
8. Power mop Scrub Attachment

PRODUCT OVERVIEW

FRONT

CHARGING BASE

BACK

BOTTOM

1. Power Button
2. WiFi Indicator
3. Home Button
4. Charging Contacts
5. Navigation Sensors
6. 360° LIDAR Module
7. Dustbin Release Latch
8. Dustbin
9. Charging Contacts
10. Side Brush
11. Omnidirectional Wheel
12. Detection Sensors
13. Left Wheel
14. Right Wheel
15. Main Brush
16. Powermop Scrub Attachment

DUSTBIN OVERVIEW

1. Bin/Filter Release Latch
2. HEPA Filter
3. Foam Filter
4. Screen Filter
5. Powermop Scrub Attachment

ROBOT INDICATORS

1. POWER BUTTON
   • Hold to turn on/off
   • Press to start/pause cleaning
2. HOME BUTTON
   • Press to return to charging dock for recharging
   • Press and Hold to initiate Wifi Setup
3. WI FI INDICATOR
4. CHARGING INDICATOR

POWER/HOME LED STATES

• Blinking Blue: Standby Mode
• Solid Blue (OFF Charge Base): Cleaning
• Solid Green (ON Charge Base): Fully Charged
• Breathing Green: Charging
• Fast Blink Red: Error
• Lights off: Off/sleeping

WIFI INDICATOR STATES

• Blinking White: Network Configuration Mode
• Solid White: Wi fi connected
• Light Off: Wi fi disconnected / Network configuration failure

CHARGING INDICATOR LED STATES

• Will remain lit Blue when connected to power

SETTING UP THE CHARGING DOCK

ABOUT YOUR CHARGING DOCK

Place the charging dock against the wall and make sure the place is an open & uncluttered area. Leaving at least 5 feet in front of the charging dock and 2 feet on both sides of the charging dock.

NOTE: Clearance around the charging base is necessary to prevent obstructions when the Vacuum returns to charce. ‘Avoid using a power source that may inadvertently be switched off (e.g. power strip, outlet controlled by a light switch, Gron.

SETTING UP THE CHARGING DOCK

1. Plug the power adapter into the port on the bottom of the charging dock and secure the cable into the channel.
   

2. Choose a location on a hard floor surface near a power outlet. Place the charging dock against the wall as shown. Plug the power adapter into a functioning wall outlet.

SETTING UP THE AUTOVAC NOVA s2

STEP 1
Install the side brush by pushing firmly down until it clicks into place.

STEP 2
Position the Vacuum on the floor near your charge dock as shown. To turn on Press and Hold the Power button until the indicator turns blue.

NOTE: Allow The indicators your Vacuum to fully charge (up to 5 hours) before first use. on your robot will turn solid green when fully charged.

STEP 3
Press the button to pair Nova S2 to your Charge Base. Nova S2 will navigate and dock to the base for charging.

USING THE iHOME CLEAN APP

UNDERSTANDING YOUR VACUUM

Your iHome Autovac is designed to automatically and intelligently clean your home. Nova S2 uses advanced laser scanning technology and multiple sensors to form a navigational map. Nova S2 will continue to clean until it has determined that the addressable floor area has been covered. The navigational map is available to view in the iHome Clean app and is updated during each clean cycle to ensure that your Autovac takes any changes (moved furniture or other obstructions) into account. Once cleaning is finished the Nova S2 will automatically return to the charge base.

DOWNLOAD THE IHOME CLEAN APP

• Search “iHome Clean” in the App Store or use the QR code below:
  
  
  

NOTE: Connecting your Vacuum to Wi-Fi is not required but highly recommended. Using the Home app, you can follow the steps to connect your Vacuum to Wi-Fi . The app will let you manage your Vacuum from anywhere, set cleaning schedules, view cleaning history, access support and more!

The iHome Clean app provides an easy step by step guide to get your Vacuum connected to Wi-Fi. Here is a checklist of what you’ll need before getting started:

• An iPhone (i0S 10 or later) OR Android (4.4 or later).
• Make sure that your phone is connected to your desired Wi-Fi Network. This will be the network that your AutoVac Nova S2 connects to.
• Your Wi-Fi network must be a 2.4Ghz network (5Ghz networks are not supported).
• Download and launch the iHome Clean app from the app store. Create a user account.
• Follow the steps in the app to add the Vacuum.

USING YOUR AUTOVAC

PREPPING YOUR HOME

Simply press the Power button on your Nova S2 to begin an Auto-Clean cycle of your home. Your Autovac will start cleaning and will continue until it has covered the entire cleaning area. It’s important to allow the Autovac to fully complete its cleaning cycle in order to ensure it is able to map out your complete floorplan (viewable in the iHome Clean app). Once cleaning is finished, the Nova S2 will automatically return to the charge base.

Use the iHome Clean App to set Areas and Boundaries in your map for customized cleaning options.

FOLLOW THE STEPS BELOW

NOTE: Before starting your first cleaning cycle please clear the floor of all abjects other than furniture as some small objects may obstruct, get caught in, or damage the iHome Autovac Nova S2.

FIRST CLEANING AND MAPPING

1. Ensure your AutoVac is on the charging base and fully charged.

2. Start an Auto Clean cycle by pressing POWER’ on your AutoVac or by choosing ‘START” in the iHome Clean app.

3. When the cleaning is complete, your home map will be visible in the iHome Clean app.

USING YOUR AUTOVAC

CLEANING MODES

Auto Clean – The Nova S2 will automatically clean your floor until it has covered the entire surface. Once cleaning is finished the Nova S2 will automatically return back to the Charge Base to empty the dustbin  and re- charge.
Area Clean – Draw customizable areas in your floor-plan within the iHome Clean App. The Nova S2 can then be sent to your desired Area.
Spot Clean – The Nova S2 will deep clean a specific spot. First, use the manual navigation control to guide your Nova S2 to the desired location. Then, choose Spot Clean mode for a deep clean.
Edge Clean – The Nova 52 will clean along your baseboards.
Powermop Scrub – Fill the water tank and connect the Powermop Scrub attachment. Nova S2 will automatically mop and vacuum your floor area. Use the iHome Clean app to specify your desired mop areas and preferences.
Manual Control – Using the navigational D-Pad on the remote control (or in the iHome Clean App) you can manually control where the Nova S2 goes to clean.

USING THE REMOTE

NOTE:

1. It is recommended to point the remote to the front of the Nova S2 for best results.
2. The remote control range is 10 – 20 feet.

USING POWERMOP SCRUB

Your Autovac comes equipped with a Power mop Scrub mopping attachment that connects to the 2-in-1 Dustbin/Water Tank. Follow the steps below to initiate wet mopping with your Autovac.

1. Place the mop pad onto the mop attachment and secure it to the velcro strips. Slip corners of the mop pad over the plastic tabs at the rear of the mop attachment.

2. Slide mop attachment onto dustbin as shown in figure below until you hear a click confirming that it is locked in place.
   

3. Install the dustbin with the mop attachement still installed into the Nova S2 according to the figure below.

4. Activate Powermop Scrub mode in the app or using the remote control.

Any Changes expressly or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
   and

2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be coylocated or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator &you body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>