Traditional Cordless Cellular Shade Instruction Manual
- June 17, 2024
- Traditional
Table of Contents
Traditional Cordless Cellular Shade
Specifications
- Product Name: Cordless Cellular Shade
- Features: Transparent Cordless Handles, Bottom Rail End Caps, Hex-Head Screws
- Installation: Inside Mount, Outside Mount
- Usage: Cordless operation, Proper stacking of the cord
Product Usage Instructions
Prepping the Shade
- Head Rail End Caps Installation:
- Install Left and Right Head Rail End Caps by sliding both top tabs into the top of the headrail.
- Bottom Rail End Caps Installation:
- Match the flat side of end caps with the bottom rail. Push fabric/stiffener against the end of the rail and slide end caps into the side of the rail.
Mounting the Shade
- Inside Mount:
- Position brackets along the top of the window opening leaving a few inches away from each side.
- Outside Mount:
- Position brackets above the window opening, spaced evenly with a few inches away from each side.
- Installing Handle
- Use flat-head screws for holes on the back of the bracket for inside mount. Do not use hex-head screws as they may prevent the shade from clicking in place.
- Mount Shade on Brackets
- Hook the front of the bracket and push the shade towards the back of the brackets in a rolling motion until it clicks into place.
- Operating Cordless Handles
- Transparent Cordless Handles should be operated from the center of the bottom rail. Ensure even spacing for shades 38″ to 72″ wide. Extend and retract the shade steadily to stack the cord evenly.
- Allow 24 hours for the shade to drop to its actual height when first installed due to the fabric’s nature.
FAQ
-
Q: Can I use hex-head screws for inside mount installation?
A: No, use flat-head screws for inside mount to avoid issues with the shade clicking in place. -
Q: How do I ensure even spacing for cordless handles?
A: For shades between 38″ and 72″ wide, spread handles out evenly by having the same distance from each side of the window.
CORDLESS CELLULAR SHADE INSTALLATION INSTRUCTIONS
Know Your Shade
Prepping the Shade
Install Left and Right Head Rail End Caps by sliding both top tabs into top of headrail.
To install Bottom Rail Left and Right End Caps, match the flat side of end caps with the bottom rail of your shade (For bottom rail end caps, left / right side are the same). By using the flat surface on end caps, push fabric/ stiffener against end of rail and slide end caps into side of rail.
Outside Mount
Position brackets above window opening. Remember to leave the brackets few
inches away from each side of your window. Spread them out evenly by having
same distance from each side of the window.
- Make sure brackets are aligned. “L” shape opening should be facing down, with shorter side against the wall.
- Insert 2 hex-head screws into both openings and fasten.
Inside Mount
Position brackets along the top of the window opening in the desired location.
Remember to leave few inches away from each side of your window.
- Make sure both brackets are aligned. “L” shape opening should be facing down, with longer side against top of the window opening.
- Insert 1 hex-head screws into oval opening, between 2 springs, and fasten.
- DO NOT use hex-head screws for holes on the back of the bracket for inside mount. It will prevent your shade from clicking in place. These holes can be operated with 2 flat-head screws (Flat-head screws are not included in the package).
Mount Shade on Brackets
Install the head rail by hooking the front of the bracket and push shade towards back of brackets, in a rolling motion, until clicks place.
Installing Handle
- Transparent Cordless Handles should be operated from the center of the bottom rail.
- For shades 38” < W 72”, spread handles out evenly- by having the same distance from each side of the window.
To insure proper usage of cordless shades, be sure to extend and retract
shade steadily assuring the cord to stack evenly.
Please allow 24 hours for your shade to drop to its actual height when
first installed due to the nature of the fabric.