B K Licht BKL1323 LED Lamp with Clip Instruction Manual

June 4, 2024
B K Licht

B K Licht BKL1323 LED Lamp with Clip Instruction Manual

Mounting instructions

Safety directions

  1. Please read this information carefully before installing or using this product. Please keep this user manual for further reference. 1. The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
  2.  Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections or mains voltage control parts.
  3. Attention! Before starting the installation work, make sure that the mains power line is voltage-free – turn off safety cutout or unscrew the protection fuse. The switch must be “OFF”.
  4. The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
  5. Safety class II . This light is specially insulated and must not be connected to an earthed conductor.
  6. Do not install the light on a damp or conductive subsurface.
  7. Please make sure that no cables get damaged during the installation work.
  8. Connection type Z: This lamp’s outer flexible cable can not be replaced. In case of any damage, the lamp must be disposed.
  9. The lamp may only be adjusted and positioned after having cooled down.
  10. The lights have a protection class rating of “IP20“ and are solely intended for indoor use only of private households.
  11. Do not look directly into the light source (illuminant, LED, etc.).
  12. The light source of this lamp is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
  13. LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LED’s can also change as a result of life span level from the lamp.
  14.  This article is not suitable for use with dimmable electric circuits.
  15. Clamp and clip lights must not be attached to tubes.
  16.  This item is a reading lamp and not a night lamp.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals