B K Licht BKL1088 Table Lamp Instruction Manual

June 9, 2024
B K Licht

B K Licht BKL1088 Table Lamp

B-K-Licht-BKL1088-Table-Lamp-PRODUCT

Mounting instructions

B-K-Licht-BKL1088-Table-Lamp-
FIG-1

  • Safety directions / Please read this information carefully before installing or using this product.

  • Please keep this user manual for further reference.

  1. The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
  2. Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections or mains voltage control parts.
  3. The lights have a protection class rating of “IP20“ and are solely intended for indoor use only of private households.
  4. The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
  5. Safety class II. This light is specially insulated and must not be connected to an earthed conductor.
  6. Do not install the light on a damp or conductive subsurface.
  7. Please make sure that no cables get damaged during the installation work.
  8. Connection type Y: In order to eliminate any risks in case of damages, the outer flexible cable of this lamp may only be replaced by a special cable or by a cable exclusively available from the manufacturer, its service representative or a comparable qualified technician.
  9. Make sure that illuminants are securely fixed during the installation.
  10. The maximum wattage indicated of each lighting unit must not be exceeded (max. “40W“).
  11. The use of energy-saving lamps may cause malfunction.
  12. Place the lamp on horizontal surfaces only.
  13. This article is not suitable for use with dimmable electric circuits.
  14. It can be dimmed using the sensor range “6“in the article. “~30% / ~70% / 100% / 0%”
  15. Further switching on and off of the lamp means having to run through the individual stages again.
  • Verehrter Kunde Sollten sich trotz neuester Fabrikationsmethoden und genauesten Qualitätskontrollen wider Erwarten Mängel herausstellen, wenden Sie sich bitte unter Angabe des Kaufdatums und der Artikelnummer des Produktes an folgende Hotline:[email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals