B K Licht BKL1346 Fabric Ceiling Light with Starry Sky Effect Instruction Manual
- June 12, 2024
- B K Licht
Table of Contents
B K Licht BKL1346 Fabric Ceiling Light with Starry Sky Effect
Product Information
The product is a lamp that requires installation by authorized and qualified technicians according to the valid regulations for electrical installation. The manufacturer does not accept responsibility for injuries or damage resulting from improper use of the light. Maintenance of the lights is limited to the surfaces. The lamp should be installed in a location where there are no gas, water, or electricity pipes and wires that can be drilled through or damaged. The mounting holes should be drilled carefully, ensuring that the attachment material is suitable for the subsurface and capable of carrying the weight of the fixture. Improper installation on the relevant subsurface is not the manufacturer’s liability. The lamp is equipped with a protection fuse that needs to be unscrewed before installation. The switch must be turned OFF and the device must be disconnected from the power source to ensure safety during the installation process. It is important to note that direct exposure to the light source (lightbulb, LED, etc.) should be avoided to prevent eye damage. Please refer to the user manual for further information and safety instructions.
Product Usage Instructions
- Ensure that the lamp is installed by authorized and qualified technicians following the valid regulations for electrical installation.
- Avoid improper use of the light to prevent injuries or damage. Follow the manufacturer’s guidelines.
- Maintenance of the lamp should only be performed on the surfaces and no moisture should come into contact with any areas of the lamp.
- Before starting the installation process, make sure there is no power supply. Disconnect the device by switching it OFF and unscrewing the protection fuse.
- Check that there are no gas, water, or electricity pipes and wires in the chosen mounting location that can be drilled through or damaged.
- Select appropriate attachment material for the subsurface and ensure it can support the weight of the fixture.
- Dispose of the product properly according to local regulations. Do not dispose of it with regular garbage.
- Avoid direct exposure to the light source to prevent eye damage.
Mounting instructions
Safety directions
Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
- The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections or main voltage control parts.
- Attention! Before starting the installation work, make sure that the mains power line is voltage-free – turn off the safety cutout or unscrew the protection fuse. The switch must be “OFF”.
- Warning! Before drilling the mounting holes, make sure that no gas, water, or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
- The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste.
- At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
- Safety class I G. This light must be connected to the earthed conductor terminal with the earthed conductor (green-yellow wire) G.
- Description of the supply terminals: L = Phase N = Neutral conductor G = Earthed conductor.
- Do not install the light on a damp or conductive subsurface.
- Please make sure that no cables get damaged during the installation work.
- Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
- The lights have a protection class rating of “IP20“ and are solely intended for indoor use only in private households.
- The maximum wattage indicated for each lighting unit must not be exceeded.
- Make sure that illuminants are securely fixed during the installation.
- Please make sure that illuminants have first cooled down before replacing them. Attention! Switch the mains power line to zero potential and switch off the circuit breaker and/or remove the fuse before!
- Do not look directly into the light source (illuminant, LED, etc.).
- The following accessories are not included in delivery: illuminants