COMMSCOPE MCG21HD Sector Frame Instruction Manual

MCG21HD Sector Frame
Instruction Manual

MCG21HD Sector Frame

1. GENERAL NOTES
   1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com

2. DESIGN NOTES
   2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
   2.2 FITS MONOPOLES 15″ TO 50″ OD.

3. MANUFACTURING/SPECIAL REQUIREMENTS
   3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.

4. TEST
   5.0 PACKAGING
   5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
   5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER.
   5.3 EXTRA HARDWARE MAYBE SUPPLIED, BAGGED AND SHIPPED.

REVISIONS

REV.| DESCRIPTION| DATE| APPROVED
A| INITIAL RELEASE| ES
25APR19| RD1048
8000032387
B| MCG21HD SERIES BOM STANDARDIZATION| YX1027
18APR22| BCROSS
40146977CMO
C| NOTES STANDARDIZATION; TIE BACK PIPES TO FACE PIPES CONNECTION REPLACED XA WITH XP-R| YX1027
24OCT22| BCROSS
40159351CMO

TOP LEVEL ZNSK COMPONENTS

PART NO.| DESCRIPTION| RINGMOUNT KIT| STIFF ARM
MOUNT KIT| CROSSOVER
PLATE KIT| STEEL BUNDLE| PIPE BUNDLE
---|---|---|---|---|---|---
MCG21HD-10M-B| TRPL SECTR FRM KIT 10’6″ FACE, NO AP| MC-RM1550-3D| MCG22-HK01| –| MCG21HD-SB01| PB0306A0610B
MCG21HD-10M-9-96| TRPL SECTR FRM KIT 10’6″ FACE, 9 96″ AP| MC-RM1550-3D| MCG22-HK01| XA20303| MCG21HD-SB01| PB0908A0306A0610B
MCG21HD-10M-9-126| TRPL SECTR FRM KIT 10’6″ FACE, 9 126″ AP| MC-RM1550-3D| MCG22-HK01| XA20303| MCG21HD-SB01| PB0910A0306A0610B
MCG21HD-10M-12-96| TRPL SECTR FRM KIT 10’6″ FACE, 12 96″ AP| MC-RM1550-3D| MCG22-HK01| XA20304| MCG21HD-SB01| PB1208A0306A0610B
MCG21HD-10M-12-126| TRPL SECTR FRM KIT 10’6″ FACE, 12 126″AP| MC-RM1550-3D| MCG22-HK01| XA20304| MCG21HD-SB01| PB1210A0306A0610B
MCG21HD-12M-B| TRPL SECTR FRM KIT 12’6″ FACE, NO AP| MC-RM1550-3D| MCG22-HK01| –| MCG21HD-SB01| PB0308A0612B
MCG21HD-12M-9-96| TRPL SECTR FRM KIT 12’6″ FACE, 9 96″ AP| MC-RM1550-3D| MCG22-HK01| XA20303| MCG21HD-SB01| PB0908A0306A0612B
MCG21HD-12M-9-126| TRPL SECTR FRM KIT 12’6″ FACE, 9 126″ AP| MC-RM1550-3D| MCG22-HK01| XA20303| MCG21HD-SB01| PB0910A0306A0612B
MCG21HD-12M-12-96| TRPL SECTR FRM KIT 12’6″ FACE, 12 96″ AP| MC-RM1550-3D| MCG22-HK01| XA20304| MCG21HD-SB01| PB1508A0612B
MCG21HD-12M-12-126| TRPL SECTR FRM KIT 12’6″ FACE, 12 126″AP| MC-RM1550-3D| MCG22-HK01| XA20304| MCG21HD-SB01| PB1210A0308A0612B

COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.

INDIVIDUAL DRAWING
3| GUB-4240| 1/2″ X 2-1/2″ X 4″ GALV U-BOLT| 27| 0.56 LBS| QTY SEE INDIVIDUAL DRAWING
4| GUB-4352| 1/2″ X 3″ X 5-1/4″ GALV U-BOLT| 36| 0.71 LBS| QTY SEE INDIVIDUAL DRAWING
5| XP-R| CROSSOVER PLATE, ROUND, UP TO 3.5″ OD| 3| 6.20 LBS|
6| SFV01| WELDMENT, SF-V STANDOFF ARM| 6| 38.32 LBS|
7| MCG2305| BRACKET, MCG12| 6| 10.041 LBS|
8| GB-05305| 5/8″ X 3″ GALV BOLT KIT| 6| 0.35 LBS|
9| GB-04145| 1/2″ X 1-1/2″ GALV BOLT KIT| 3| 0.13 LBS|
10| GB-05225| 5/8″ X 2-1/4″ GALV BOLT KIT| 24| 0.28 LBS|
11| GWF-04| 1/2″ GALV FLAT WASHER| 3| 0.04 LBS|
12| GWF-05| 5/8″ GALV FLAT WASHER, 1.7OD| 24| 0.06 LBS|
13| SFG2251| LABEL, SFG2A| 3| 0.03 LBS|
14| MT546126120| PIPE, 2.875″OD X 126″| 6| 37.21 LBS| PART NO. SEE INDIVIDUAL DRAWING
15| MT-651-96| 2.375″ OD X 96″ PIPE| 12| 23.05 LBS| PART NO. AND QTY SEE INDIVIDUAL DRAWING
16| MT-651| 2.375″ OD X 72″ PIPE| 3| 17.44 LBS|

C 2022 CommScope, Inc.
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
SECTOR FRAME – MCG21HD

SIZE
C| SCALE
1:16| DOCUMENT NO.
MCG21HD
---|---|---
| DRAWING| SHEET
2 OF 6
VERSION| STATUS| REVISION
2| RE| C

ALLOWABLE TIEBACK ANGLE

15 DEGREES VERTICAL
25 DEGREES HORIZONTAL

MCG21HD-10M-12-96 SHOWN FOR REFERENCE
(NOT ALL CONFIGURATIONS INCLUDE ALL ITEMS SEE NOTES IN TABLE ON SHEET 2)

C 2022 CommScope, Inc.
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
SECTOR FRAME – MCG21HD

SIZE
C| SCALE
1:20| DOCUMENT NO.
MCG21HD
---|---|---
| DRAWING| SHEET
3 OF 6
VERSION| STATUS| REVISION
2| RE| C

STEP 1: ATTACH STANDOFF ARMS (SFV01) USING (GB-05305) BOLT KITS

STEP 2: ATTACH FACE PIPES TO STANDOFF ARMS (SFV01) USING U-BOLTS (GUB-4352) AND THEN ATTACH ANTENNA PIPES TO FACE PIPES USING CROSSOVER ANGLES (XAU01) AND U-BOLTS (GUB-4240 AND GUB-4352 ) ![COMMSCOPE MCG21HD Sector Frame

• ANTENNA PIPES](https://manuals.plus/wp-content/uploads/2023/11/COMMSCOPE- MCG21HD-Sector-Frame-ANTENNA-PIPES.jpg)

C 2022 CommScope, Inc.
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
SECTOR FRAME – MCG21HD

SIZE
C| SCALE
1:20| DOCUMENT NO.
MCG21HD
---|---|---
| DRAWING| SHEET
4 OF 6
VERSION| STATUS| REVISION
2| RE| C

STEP 3: ATTACH BRACKETS (MCG2305) TO STANDOFF ARMS (SFV01) USING BOLT KITS (GB-05305)

STEP 4: ATTACH BRACKETS (MCG2305) TO RINGMOUNTS USING BOLT KITS (GB-05225)

C 2022 CommScope, Inc.
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
SECTOR FRAME – MCG21HD

SIZE
C| SCALE
1:24| DOCUMENT NO.
MCG21HD
---|---|---
| DRAWING| SHEET
5 OF 6
VERSION| STATUS| REVISION
2| RE| C

STEP 5: ATTACH TIE BACK PIPES (MT-651) TO FACE PIPES USING ROUND CROSSOVER PLATE KITS (XP-R).

SIZE
C| SCALE
1:8| DOCUMENT NO.
MCG21HD
---|---|---
| DRAWING| SHEET
6 OF 6
VERSION| STATUS| REVISION
2| RE| C

References

• Product Patent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>