nordlux 2118221003 Agena LED Wall Light Instruction Manual
- June 15, 2024
- nordlux
Table of Contents
2118221003 Agena LED Wall Light
Instruction Manual
2118221003 Agena LED Wall Light
AGENA
item N°: 2118221003
IPX4
Protected against solid objects with a diametre of 1.0 mm or more. Hazardous parts are shielded from contact being made using wires, etc.
Class III: The lamp is only suitable for 5V.
The mounting instruction must not be discarded.
Disposal of waste equipment by users in private households in the European
Union. This symbol indicates that this product including batteries must not be
disposed of with your other household waste. Batteries, electrical and
electronic equipment contain substances which may cause damage to human health
and environment if not recycled correctly. It is your responsibility to hand
over to a designated collection point for recycling of waste batteries,
electrical and electronic equipment. When handing over for correct recycling
you help to prevent these products straining nature and environment
unnecessarily and to protect human health. For more information regarding
correct disposal, please contact your local city office, your household waste
disposal service or the store where you purchased this product.
We congratulate you on your new outdoor lamp!
We congratulate you on your new outdoor lamp!
Guarantee
The Nordlux Outdoor lamps in copper, brass, tombac and galvanized are
guaranteed for up to 15 years. This guarantee applies to extensive corrosion
in the form of holes in the metal caused by rust. The guarantee is subject to
presentation of receipt.
There is not guarantee on the components which have been damaged by wear
and tear or mistreatment of the lamps
We congratulate you on your new outdoor lamp
Stainless steel
Remember to take care of your lamp. Just follow the guidelines below.
The shiny, uniform and decorative surface of stainless steel makes it very
suitable for outdoor use.
It is an alloy consisting of iron, chrome and nickel. During bath pickling, a
thin, rustproof oxide layer forms on the surface. The surface is continually
vulnerable to atmospheric conditions, and from other effects of the close
environment. This means that the lamp must be regularly maintained if its
surface is to remain shiny and untar-nished by rust. Before setting it up,
treat your lamp with acid-free oil, and dry it off with a soft cloth. Repeat
this three or four times a year. Stainless steel lamps are not recommended for
use in aggressive environments such as coastal, agricultural or industrial
areas.
INSTRUCTIONS
Please read these carefully before attempting to instal this fitting.It is advisable to keep these instructions in a safe place for future reference.If this fitting is installed by a contractor,the contractor should ensure that the customer has a copy of these instructions.
SENSOR SPECIFICATIONS
| Voltage: | 5V charge by solar panel |
|---|---|
| Angle of detection: | 100degrees |
| Lux operation: | More than 50lux turn off, less than 50lux turn on |
| Time on: | NA |
| Manual override: | NA |
| Max.detection range: | Up to 8 meters approx.depending on weather conditions |
and mounting height.NOTE!The 8m detection range appliers when a person is
walking across the detection area,not working towards the sensor.If a person
is walking towards the sensor and 1.5m to the left or right of it,the
detection range is typically between 4m and 6m.
Mounting height:| 1.8 to 2meters approx.
Ambient operating temp.ranger:| -20°to+40°Celsius
OPERATION
Normal Power-up
Under the less than 50lux,When people walk through,and the distance is max 8m,
the lamp will turn on.When the lux is more than 50 lux,the lamp will turn off.
Moreover,when the lamp is turning on,after 45S±5S,nobody walk across,the lamp
will turn off automaticly.