COMMSCOPE TENIO-C6H-START TENIO C6 288f Distribution Closure STARTer Kit Instruction Manual
- June 15, 2024
- CommScope
Table of Contents
- COMMSCOPE TENIO-C6H-START TENIO C6 288f Distribution Closure STARTer Kit
- Base closures
- Sealings
- Cable attachments
- Mounting brackets
- Splitters
- Applications for the TENIO kits
- Preconfigured TENIO kits for the UK FTTH applications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
COMMSCOPE TENIO-C6H-START TENIO C6 288f Distribution Closure STARTer Kit
Product Ordering Guide for the United Kingdom
TENIO Ordering Guide UK FTTH applications
Building a TENIO closure kit requires choosing these five types of components:
- Base closure
- Cable seals
- Cable attachments
- Mounting bracket
- Splitters
Base closures
There are two sizes. B6 and C6.
Sealings
There are six cavities, each one for one sealing type. Each sealing has more than one cable going through (outlets).
Number of outlets | Diameter range | Ordering Number |
---|---|---|
5 | 2 mm – 4 mm | TENIO-SKG5-2/4 |
4 | 3 mm – 6 mm | TENIO-SKG4-3/6 |
3 | 5 mm – 8 mm | TENIO-SKG3-5/8 |
3 | 7 mm – 10 mm | TENIO-SKG3-7/10 |
2 | 9 mm – 12 mm | TENIO-SKG2-9/12 |
2 | 11 mm – 14 mm | TENIO-SKG2-11/14 |
2 | 13 mm – 16 mm | TENIO-SKG2-13/16 |
3 | Flat cable |
3/5 mm x 6/9 mm
| TENIO-SKG3-3/5X6/9
N/A| Dummy cable seal| TENIO-SKG-DUMMY
Cable attachments
There are two types: CTU-S and CTU-L. Use one CTU per installed cable.
CTU-S
- use with cable seals:
- TENIO-SKG5-2/4,
- TENIO-SKG4-3/6
CTU-L
- use with cable seals:
- TENIO-SKG-3-5/8,
- TENIO-SKG3-7/10,
- TENIO-SKG2-9/12,
- TENIO-SKG2-11/14,
- TENIO-SKG2-13/16,
- TENIO-SKG3-3/5×6/9
Mounting brackets
TENIO-MOBRA-TUBE-45X45 is a mounting bracket compatible with PIA standard chamber MOBRA arms.
Splitters
A dedicated storage area is used to house splitter holders in the TENIO closure. Splitter holders are available in two sizes: small and large. Holders ship with one splitter each. Small and large holders can contain the following splitter configurations:
Small holders
| 1:2| 2:2
---|---|---
1:8| 2:8
1:16| –
Large holders
| –| 2:16
1:32| 2:32
1:64| 2:64
The following table shows the number of holders accommodated by TENIO closures:
Closure size | Maximum number of small holders | Maximum number of large holders |
---|
TENIO-B6
| 8| 0
5| 1
2| 2
TENIO-C6H
| 15| 0
12| 1
8| 2
5| 3
2| 4
Every splitter has to be ordered with a filed installable housing (see the tables below): e.g. 2x SP-10400NNNNXABB + 1 x 760254196
Field installable splitter holder
MID| Description| Spltter type| Product compatibility|
---|---|---|---|---
760254196
|
SP holder 250um 2 position kit
of 10
(Kit contains 10 pieces of splitter holder)
| 1×2 250um (4x4x40)|
FIST-SOSA2-SE FIST-SOSA2-R TENIO
OFDC
| Dual splitter holder
1×4 250um (4x4x40)
1×8 250um (4x4x40)
2×2 250um (4x4x40)
2×4 250um (4x4x40)
2×8 250um (4x4x40)
760253440
|
SP holder 2 position kit of 10 (Kit contains 10 pieces of splitter holder)
| 1×16 250um (4x5x45)|
FIST-SOSA2-R12 TENIO OFDC
| Dual splitter holder
1×32 250um (4x7x55)
2×16 250um (4x5x45)
2×32 250um (4x7x55)
1×2 900um (4x7x60)
1×4 900um (4x7x60)
1×8 900um (4x7x60)
2×2 900um (4x7x60)
2×4 900um (4x7x60)
2×8 900um (4x7x60)
PLC splitter 250 µm
MID | Description |
---|---|
SP-10400NNNNXABB | PLC 1X4 250UM NO CONN |
SP-10800NNNNXABB | PLC 1X8 250UM NO CONN |
SP-11600NNNNXABB | PLC 1X16 250UM NO CONN |
SP-13200NNNNXABB | PLC 1X32 250UM NO CONN |
SP-16400NNNNXABB | PLC 1X64 250UM NO CONN |
Applications for the TENIO kits
TENIO-B6 144f Distribution closure STARTer kit
Description | TENIO-B6-START |
---|---|
TENIO-B6-S12-12-V | 1 |
TENIO-SKG4-3/6 | |
TENIO-SKG3-5/8 | |
TENIO-SKG3-7/10 | 1 |
TENIO-SKG3-3/5X6/9 | |
TENIO-SKG-DUMMY | 6 |
CTU-S | |
CTU-L | 2 |
TENIO-MOBRA-TUBE-45×45 | 1 |
Suitable for all splice closure applications with a maximum capacity of 144 fibres. This basic kit contains a full set of blanking seals, one feeder cable seal kit, cable termination units to install a loop-through feeder. Full set of splice trays for up to 144f splices. Please select distribution seal kits, CTU’s and splitters from our ordering guide. This kit contains a MOBRA bracket suitable for use with PIA cham-bers. Fibre trays and seal kits are pre- assembled into the closure in the factory to reduce engineering time in the field.
TENIO-B6 144f Distribution closure round cable kit
Description | TENIO-B6-144-ROUND |
---|---|
TENIO-B6-S12-12-V | 1 |
TENIO-SKG4-3/6 | 1 |
TENIO-SKG3-5/8 | 1 |
TENIO-SKG3-7/10 | 1 |
TENIO-SKG3-3/5X6/9 | |
TENIO-SKG-DUMMY | 3 |
CTU-S | 3 |
CTU-L | 6 |
TENIO-MOBRA-TUBE-45×45 | 1 |
Assembled TENIO designed for 144 fibre distribution closure kit for round cable with various diameters. The kit contains a range of seal kits from 3mm to 12mm diameters and cable termination units to complete installation of feeder cable (loop-through) and various distributions cables. It also has a MOBRA bracket suitable for use with PIA chambers. Fibre trays and seal kits are pre-assembled into the closure in the factory to reduce engineering time in the field. This kit provides enough accessories to complete most jobs of this size and nature. Please review the kit table above for exact contents.
TENIO-B6- Distribution closure FLAT cable kit
Description | TENIO-B6-FLAT |
---|---|
TENIO-B6-S12-12-V | 1 |
TENIO-SKG4-3/6 | |
TENIO-SKG3-5/8 | |
TENIO-SKG3-7/10 | 1 |
TENIO-SKG3-3/5X6/9 | 4 |
TENIO-SKG-DUMMY | 1 |
CTU-S | |
CTU-L | 10 |
TENIO-MOBRA-TUBE-45×45 | 1 |
This kit is designed to splice HST hardened terminals. Kitted with flat seal
kits out, and a standard round kit for incoming feeder. Cable termination
units are included as well as a MOBRA bracket suitable for use with PIA
chambers. Fibre trays and seal kits are
pre-assembled into the closure in the factory to reduce engineering time in
the field.
TENIO-C6 288f Distribution closure STARTer kit
Description | TENIO-C6H-START |
---|---|
TENIO-C6H-SLE-12-V | 1 |
TENIO-SKG4-3/6 | |
TENIO-SKG3-5/8 | |
TENIO-SKG3-7/10 | 1 |
TENIO-SKG2-9/12 | |
TENIO-SKG-DUMMY | 6 |
CTU-S | |
CTU-L | 2 |
TENIO-MOBRA-TUBE-45×45 | 1 |
Suitable for all splice closure applications with maximum capacity of 288 fibres. This basic kit contains a full set of blanking seals, one feeder cable seal kit, cable termination units to install a loop-through feeder. Full set of splice trays for up to 288f splices. Please select distribution seal kits, CTU’s and splitters from our ordering guide. This kit contains a MOBRA bracket suitable for use with PIA chambers. Fibre trays and seal kits are pre- assembled into the closure in the factory to reduce engineering time in the field.
TENIO-C6 288f Distribution closure ROUND cable kit
Description | TENIO-C6H-288-ROUND |
---|---|
TENIO-C6H-SLE-12-V | 1 |
TENIO-SKG4-3/6 | 1 |
TENIO-SKG3-5/8 | 1 |
TENIO-SKG3-7/10 | 1 |
TENIO-SKG2-9/12 | 1 |
TENIO-SKG-DUMMY | 2 |
CTU-S | 3 |
CTU-L | 8 |
TENIO-MOBRA-TUBE-45×45 | 1 |
288 fibre distribution closure kit for round cable with various diameters. The kit contains a range of seal kits from 3mm to 12mm diam-eters and cable termination units to complete installation of feeder cable (loop-through) and various distributions cables. It also has a MOBRA bracket suitable for use with PIA chambers. Fibre trays and seal kits are pre-assembled into the closure in the factory to reduce engineering time in the field. This kit provides enough accessories to complete most jobs of this size and nature. Please review the kit table above for exact contents.
Preconfigured TENIO kits for the UK FTTH applications
TENIO B6 KITS
CommScope pushes the boundaries of communications technology with game- changing ideas and ground-breaking discoveries that spark profound human achievement. We collaborate with our customers and partners to design, create and build the world’s most advanced networks. It is our passion and commitment to identify the next opportunity and realize a better tomorrow. Discover more at commscope.com.
commscope.com Visit our website or contact your local CommScope representative for more information. © 2023 CommScope, Inc. All rights reserved. All trademarks identified by ™ or ® are trademarks or registered trademarks in the US and may be registered in other countries. All product names, trademarks and registered trademarks are property of their respective owners. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. CO-117969-EN.GB (07/23)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>